The Impacts of Moisture and Ultraviolet Light on the Degradation of Graphene Oxide/Polymer Nanocomposites

Everything falls apart: How solids degrade and release nanomaterials, composite fragments, and microplastics

To ensure the safe use of materials, one must assess the identity and quantity of exposure. Solid materials, such as plastics, metals, coatings and cements, degrade to some extent during their life cycle, and releases can occur during manufacturing, use and end-of-life. Releases (e.g., what is released, how does release happen, and how much material is released) depend on the composition and internal (nano)structures of the material as well as the applied stresses during the lifecycle. We consider, in some depth, releases from mechanical, weathering and thermal stresses and specifically address the use cases of fused-filament 3D printing, dermal contact, food contact and textile washing. Solid materials can release embedded nanomaterials, composite fragments, or micro- and nanoplastics, as well as volatile organics, ions and dissolved organics. The identity of the release is often a heterogenous mixture and requires adapted strategies for sampling and analysis, with suitable quality control measures. Control materials enhance robustness by enabling comparative testing, but reference materials are not always available as yet. The quantity of releases is typically described by time-dependent rates that are modulated by the nature and intensity of the applied stress, the chemical identity of the polymer or other solid matrix, and the chemical identity and compatibility of embedded engineered nanomaterials (ENMs) or other additives. Standardization of methods and the documentation of metadata, including all the above descriptors of the tested material, applied stresses, sampling and analytics, are identified as important needs to advance the field and to generate robust, comparable assessments. In this regard, there are strong methodological synergies between the study of all solid materials, including the study of micro- and nanoplastics. From an outlook perspective, we review the hazard of the released entities, and show how this informs risk assessment. We also address the transfer of methods to related issues such as tyre wear, advanced materials and advanced manufacturing, biodegradable polymers, and non-solid matrices. As the consideration of released entities will become more routine in industry via lifecycle assessment in Safe-and-Sustainable-by-Design practices, release assessments will require careful design of the study with quality controls, the use of agreed-on test materials and standardized methods where these exist and the adoption of clearly defined data reporting practices that enable data reuse, meta-analyses, and comparative studies.

Assessing children's potential exposures to harmful metals in tire crumb rubber by accelerated photodegradation weathering

Whether a tire crumb rubber (TCR) playground would expose children to potentially harmful chemicals such as heavy metals is an open question. The released metals available for pickup on the surface of TCR tiles was studied by accelerated 2-year aging of the TCRs in the NIST-SPHERE (National Institute of Standards and Technology Simulated Photodegradation via High Energy Radiant Exposure). The dermal contact was mimicked by a method of composite surface wiping from US Environmental Protection Agency throughout the weathering process. The surface release of ten most concerned harmful metals (Be, Cr, Cu, As, Se, Cd, Sb, Ba, Tl, Pb) was monitored through the course of aging. The cumulative release of Cu, As, Tl, and Sb reached potentially harmful levels at various times within 3 years, although only Cr was found at a harmful level on the surface of the tiles. Taking the cleansing effect of precipitation or periodic cleansing with rain into account, TCR playgrounds may still be safe for use.

Environmental effects of stratospheric ozone depletion, UV radiation, and interactions with climate change: UNEP Environmental Effects Assessment Panel, Update 2021

The Environmental Effects Assessment Panel of the Montreal Protocol under the United Nations Environment Programme evaluates effects on the environment and human health that arise from changes in the stratospheric ozone layer and concomitant variations in ultraviolet (UV) radiation at the Earth’s surface. The current update is based on scientific advances that have accumulated since our last assessment (Photochem and Photobiol Sci 20(1):1–67, 2021). We also discuss how climate change affects stratospheric ozone depletion and ultraviolet radiation, and how stratospheric ozone depletion affects climate change. The resulting interlinking effects of stratospheric ozone depletion, UV radiation, and climate change are assessed in terms of air quality, carbon sinks, ecosystems, human health, and natural and synthetic materials. We further highlight potential impacts on the biosphere from extreme climate events that are occurring with increasing frequency as a consequence of climate change. These and other interactive effects are examined with respect to the benefits that the Montreal Protocol and its Amendments are providing to life on Earth by controlling the production of various substances that contribute to both stratospheric ozone depletion and climate change.

A Review on Graphene’s Light Stabilizing Effects for Reduced Photodegradation of Polymers

Graphene, the newest member of the carbon’s family, has proven its efficiency in improving polymers’ resistance against photodegradation, even at low loadings equal to 1 wt% or lower. This protective role involves a multitude of complementary mechanisms associated with graphene’s unique geometry and chemistry. In this review, these mechanisms, taking place during both the initiation and propagation steps of photodegradation, are discussed concerning graphene and graphene derivatives, i.e., graphene oxide (GO) and reduced graphene oxide (rGO). In particular, graphene displays important UV absorption, free radical scavenging, and quenching capabilities thanks to the abundant π-bonds and sp2 carbon sites in its hexagonal lattice structure. The free radical scavenging effect is also partially linked with functional hydroxyl groups on the surface. However, the sp2 sites remain the predominant player, which makes graphene’s antioxidant effect potentially stronger than rGO and GO. Besides, UV screening and oxygen barriers are active protective mechanisms attributed to graphene’s high surface area and 2D geometry. Moreover, the way that graphene, as a nucleating agent, can improve the photostability of polymers, have been explored as well. These include the potential effect of graphene on increasing polymer’s glass transition temperature and crystallinity.