Reliable anatomical landmarks for minimizing leg-length discrepancy during hip arthroplasty using the lateral transgluteal approach for femoral neck fracture

Restoration of hip anatomy using computer modelling prior to total hip arthroplasty and its potential consequences in terms of lower limb-length difference

BACKGROUND

Restoring hip anatomy during total hip arthroplasty (THA) is the gold standard. The general goal is for hips to be symmetrical in terms of height. This study aimed to analyse the effect of simulating hip length (HL) equalisation on leg-length difference (LLD) before and after THA with a computerised plan.

METHODS

141 consecutive patients were enrolled following THA. Outcomes of interest were preoperative hip-length difference (HLD) and LLD as determined on CT and final LLD as determined by simulating HL equalisation. We divided patients into 3 groups: no LLD, LLD >5 mm and LLD ⩾10 mm.

RESULTS

The rate of preoperative LLD >5 mm and LLD ⩾10 mm was 37.5% and 14.8%, respectively. HL equalisation did not change LLD distribution in the overall cohort. Among patients with smaller preoperative HLs and LLDs, HL equalisation changed the rate of LLD >5 mm from 100% (n = 24) to 41.7% (n = 10) (p < 0.0001) and of LLD ⩾10 mm from 100% (n = 12) to 16.7% (n = 2) (p < 0.0001). Among patients with no preoperative LLD, HL equalisation changed the rate of LLD ⩽5 mm from 100% (n = 64) to 59.3% (n = 38) (p < 0.0001) and of LLD<10 mm from 100% (n = 76) to 89.5% (n = 68) (p = 0.006).

CONCLUSIONS

Restoring biomechanical hip anatomy by HL equalisation may not be the correct goal for all patients. In patients with no LLD and shorter HLs, equalisation could result in LLD >5 mm in 40% of patients and LLD >10 mm in 10%, demonstrating the necessity to further analyse individuals and propose a personalised stem position.

Optimising Soft-Tissue Balancing in Hip Hemiarthroplasty Surgery Using a Simple Planning Protocol

Introduction Intracapsular neck of the femur fractures are some of the most common fragility fractures with significant morbidity and mortality. Cemented hemiarthroplasty is the standard treatment in most cases. Restoring the horizontal offset and leg length is important to optimize the outcome of hip hemiarthroplasty. Preoperative templating based on a scaled radiograph is common prior to total hip arthroplasty surgery to achieve optimum offset and leg length. It is not routine to have scaled radiographs available prior to a hemiarthroplasty surgery. Our simple non-scaled radiograph templating protocol (NSRTP) was introduced to help establish the correct offset and leg length in the absence of scaled radiographs. Methods A retrospective, comparative, case-control study was carried out in an acute hospital setting. Scaled radiographs were not available for any patients in the study, as is usual for hemiarthroplasty patients in our hospital. One group had surgery without any templating. The other group had surgery using the NSRTP. The NSRTP determined optimal ipsilateral offset based on preoperative measurement of the contralateral hip offset and ipsilateral head diameter on unscaled radiographs together with intraoperative measurement of the diameter of the ipsilateral femoral head removed at surgery. To help achieve the correct length, the NSRTP also included assessment and restoration of the contralateral greater trochanter tip-to-head relationship. The neck cut was tailored to restore the correct relationship. Results Twenty-three patients underwent hemiarthroplasty surgery without any templating and 23 had surgery using the NSRTP. The implants used were C-STEM™ (DePuy Synthes, Raynham, Massachusetts, United States) and SPECTRON (Smith & Nephew plc, London, United Kingdom); stems were used together with monopolar heads. The stems were available in standard and high offset versions and with a variety of neck lengths, allowing the correct combination to be selected to restore offset. When the NSRTP was used, horizontal offset and leg length were restored to within 2 mm of the contralateral hip in 22 patients out of 23. There was a statistically significant improvement in restoration of offset and leg length when the NSRTP was used, compared to the control group. Conclusion Restoration of the offset and leg length is important to maximize the outcome of hip arthroplasty surgery. Preoperative templating is helpful to achieve offset and leg length in total hip replacement. In the absence of scaled radiographs, NSRTP enables restoration of offset and leg length to within 2 mm of normal in more than 96% of patients. This protocol requires knowledge of the offset of the hemiarthroplasty stems being used, which is easily available from the relevant manufacturer.

A novel method of manual positioning based on anatomical mark (shoulder-to-shoulder) to prevent postoperative leg-length discrepancy for femoral neck fractures in hip arthroplasty

OBJECTIVE

To determine whether the two lower extremities are of equal length after hip arthroplasty for femoral neck fractures, we developed a novel method of manual positioning based on anatomical mark (shoulder-to-shoulder) in hip arthroplasty.

METHODS

Patients with femoral neck fractures requiring hip arthroplasty from July 2020 to March 2022 in the orthopedic department of Jinjiang Municipal Hospital, Fujian Province, China were recruited. Hip arthroplasty was performed using the proposed "shoulder-to-shoulder" method of manual positioning based on anatomical mark in 52 patients with femoral neck fractures who met the inclusion criteria. "Shoulder-to-shoulder" was achieved by alignment of the marked femoral "shoulder" and the "shoulder" of prosthesis stem. There were 16 male and 36 female patients, with 27 undergoing total hip arthroplasty (THA) and 25 undergoing hip hemiarthroplasty (HA). The fractures were categorized according to the Garden classification: type II, type III, and type IV in 5, 11, and 36 patients, respectively. The vertical distance from the apex of the medial margin of the femoral trochanter to the tear drop line on both sides which was regarded as the length of both limbs were compared via postoperative imaging, and the apex-shoulder distance on the ipsilateral side measured via postoperative imaging was compared with those measured intraoperatively.

RESULTS

All patients completed the surgery successfully. The measurement results for the lower extremities after THA were as follows: contralateral group, 43.87 ± 5.59 mm; ipsilateral group, 44.64 ± 5.43 mm. The measurement results for the lower extremities after HA were as follows: contralateral group, 45.18 ± 7.82 mm; ipsilateral group, 45.16 ± 6.43 mm. The measurement results for the lower extremities after all arthroplasties were as follows: contralateral group, 44.50 ± 6.72 mm; ipsilateral group, 44.89 ± 5.90 mm. The results for the apex-shoulder distance were as follows: postoperative imaging, 19.44 ± 3.54 mm; intraoperative apex-shoulder distance, 27.28 ± 2.84 mm. Statistical analysis results indicated no statistically significant difference in the postoperative bilateral lower extremity length after hip arthroplasty (P = 0.75), while a statistically significant difference was found between the intraoperative and postoperative imaging measurements of the apex-shoulder distance (P < 0.01).

CONCLUSION

The novel method of manual positioning based on anatomical mark (shoulder-to-shoulder) for femoral neck fractures in hip arthroplasty is simple and accurate, making it effective for preventing postoperative bilateral leg length discrepancy.

Effect of Vertical and Lateral Offset Restoration on Clinical Outcomes in Intracapsular and Extracapsular Hip Fractures Undergoing Hemiarthroplasty

Objective

We aimed to investigate whether there is a change in the postoperative lateral and vertical femoral offset (FO) in patients who underwent bipolar straight stem hemiarthroplasty (SSHA) and calcar stem hemiarthroplasty (CRHA) and whether this change makes a difference in the comparison of both groups.

Material and methods

This study included 109 patients who met these criteria. Patients are divided into two groups according to treatment methods. There were 58 patients (group 1) who underwent SSHA due to intracapsular (AO type 31-B neck and 31-C head fracture) femur fracture, and there were 51 patients (group 2) who underwent CRHA due to extracapsular (AO type 31-A intertrochanteric) femur fracture. We analyzed femoral vertical and lateral femoral offset, Wiberg angle, and head-neck angle difference in both groups.

Results

The median age was significantly higher in the CRHA group (p=0.042). The Harris hip score (HHS) was significantly higher in the SSHA group (p=0.023). The femoral offset difference was 5 mm in the SSHA group, while it was significantly lower (-6 mm) in the CRHA group (p<0.001). The Wiberg angle difference did not differ significantly between patient groups (p=0.214). The limb length difference was found to be similar in both surgical groups (p=0.483).

Conclusions

The study results show that there was no negative correlation between clinical and radiological outcomes in the SSHA group, whereas there was a negative correlation between clinical and radiological outcomes in the CRHA group. It is very difficult to control vertical and lateral offset reconstruction, especially in extracapsular hip fractures reconstructed by hemiarthroplasty. Deficiencies in lateral and vertical stabilization restoration may be associated with poor clinical outcomes in CRHA patients. Orthopedic surgeries should be performed carefully when restoring leg length and femoral offset, especially calcar replacement hemiarthroplasties.

The External Obturator Footprint Is a Usable, Accurate, and Reliable Landmark for Stem Depth in Direct Anterior THA

BACKGROUND

Previous CT and cadaver studies have suggested that the external obturator footprint might be used as a landmark for stem depth in direct anterior THA. Instructions on where to template this structure with small variability in height have been developed but have not been tested in daily clinical practice.

QUESTIONS/PURPOSES

In this study we sought to investigate the (1) usability, (2) accuracy, and (3) reliability of the external obturator footprint as a landmark for stem depth in direct anterior THA.

METHODS

The distance between the superior border of the external obturator tendon and the shoulder of the stem was measured intraoperatively in all patients (n = 135) who underwent primary THA via a direct anterior approach performed by the senior author between November 2019 and October 2020. The landmark was considered useful when two of thre`e evaluators agreed that the intersection of the vertical line comprised of the lateral wall of the trochanteric fossa and the oblique line formed by the intertrochanteric crest was clearly visible on the preoperative planning radiograph, and when the landmark was furthermore identified with certainty during surgery. Accuracy was defined as the degree of agreement (categorical for thresholds of 2 and 5 mm, the latter representing the threshold for developing unphysiological gait parameters) between the intraoperative distance and radiographic distance as measured on intraoperative fluoroscopy images or postoperative radiographs, which were calibrated based on femoral head sizes in a software program commonly used for templating. Intrarater reliability was defined as the degree of agreement (categorical for thresholds of 1 mm, which we considered an acceptable measurement error) between the ratings of one observer, who measured the radiographic distance on two different occasions separated by a washout period of at least 2 weeks. Interrater reliability was defined as the degree of agreement (categorical for thresholds of 1 mm, which we considered an acceptable measurement error) between the ratings of three observers with varying levels of experience (a fellowship-trained hip surgeon, a hip surgery fellow, and a medical student).

RESULTS

The landmark was considered useful in 77% (104 of 135) of patients who underwent direct anterior THA based on the observations that the trochanteric fossa was clearly visible on the planning radiograph in 117 patients and that the tendon was identified with certainty during surgery in 118 patients. There was good-to-excellent accuracy (intraclass correlation coefficient 0.75-087), and intrarater reliability (ICC 0.99) and interrater reliability (ICC 0.99) were both excellent.

CONCLUSION

This clinical study showed that the external obturator footprint is a useful, accurate, and reliable landmark for stem depth in direct anterior THA.

CLINICAL RELEVANCE

The external obturator landmark allows the surgeon to position the stem within a range of the templated depth that is beneath the threshold for the development of unphysiological gait parameters. Although strictly speaking it was found useful in 77% of patients in this study, we found that this percentage of usability can easily be improved to around 90% by providing the radiology lab technician with instructions to correct external rotation of the foot during the taking of the planning radiograph. Future studies could compare the established (in)equality in leg length in patients using the external obturator landmark with computer-assisted surgery.

A simple method to minimize leg length discrepancy in hip hemiarthroplasty

Purpose

We developed a simple method to minimize leg length discrepancy (LLD) during hip arthroplasty. The purpose of this study is to evaluate the accuracy of the method.

Patients and methods

A total of 47 patients who suffered from unilateral femoral neck fracture and underwent hip hemiarthroplasty between 2015 and 2018 were enrolled in this study. We measured the diameter of the contralateral femoral head (D) and the distance (L) between the center of the femoral head and the top of lesser trochanter in the antero-posterior pelvic X-ray view before the operation, the ratio (R) of D to L was calculated. During the operation, the diameter of the femoral head (d) was measured using a Vernier caliper. Then, the distance should be obtained from the center of the femoral head prosthesis to the lesser trochanter was calculated according to the contralateral ratio R.

Results

The mean LLD was 4.4±3.2 mm (−4.0 to 11.1 mm), 80.9% of the patients had LLD <6 mm, 93.6% of the patients with LLD <10 mm, only 6.4% ≥10 mm LLD.

Conclusion

This method is a simple, cost-effective, fast and accurate way to reduce the postoperative leg length discrepancy.