Luminescent staircase copper(I) coordination polymer based on planar Cu3I3

Coordination polymers: a promising candidate for photo-responsive electronic device application

The design and synthesis of electrically conductive coordination polymers (CPs) are of special interest due to their applications in the fabrication of many environmentally benign emerging technologies, such as molecular wires, photovoltaic cells, light emitting diodes (LEDs), field effect transistors (FETs) and Schottky barrier diodes (SBDs). Owing to their structural flexibility, easy functionality and adjustable energy levels, CPs are promising candidates for providing a better pathway for superior charge transport. Again, the utilization of visible light as an external stimulus to control and manoeuvre the electrical properties of the CPs is exceptionally motivating for the development of many optoelectronic devices, such as photodetectors, photo-switches, photodiodes and chemiresistive sensors. The applications of such materials in devices will solve questions regarding the energy crisis and environmental concerns. This study provides an overview of the recent advances in the development of photo-responsive CPs and the possibility of their application in developing optoelectronic devices. In this regard, a thorough literature survey was performed and the studies related to the fabrication of photosensitive conducting CPs for applications in optoelectronic devices are listed.

Cu(I)-I-2,4-diaminopyrimidine Coordination Polymers with Optoelectronic Properties as a Proof of Concept for Solar Cells

Two coordination polymers with formulas [CuI(dapym)]_n and [Cu₂I₂(dapym)]_n (dapym = 2,4-diaminopyrimidine) have been synthesized in water at room temperature. According to the stoichiometry used, mono (1D) and the two-dimensional (2D) structures can be obtained. Both are made up of Cu₂I₂ double chains. Their high insolubility in the reaction medium also makes it possible to obtain them on a nanometric scale. Their structural flexibility and short Cu-Cu distances provoke interesting optoelectronic properties and respond to physical stimuli such as pressure and temperature, making them interesting for sensor applications. The experimental and theoretical studies allow us to propose different emission mechanisms with different behaviors despite containing the same organic ligand. These behaviors are attributed to their structural differences. The emission spectra versus pressure and temperature suggest competencies between different transitions, founding critical Cu₂I₂ environments, i.e., symmetric in the 1D compound and asymmetric for the 2D one. The intensity in the 2D compound's emission increases with decreasing temperature, and this behavior can be rationalized with a structural constriction that decreases the Cu-Cu and Cu-I distances. However, compound 1D exhibits a contrary behavior that may be related to a change of the organic ligand's molecular configuration. These changes imply that a more significant Π-Π interaction counteracts the contraction in distances and angles when the temperature decreased. Also, the experimental conductivity measurements and theoretical calculations show a semiconductor behavior. The absorption of the 1D compound in UV, its intense emission at room temperature, and the reduction to nanometric size have allowed us to combine it homogeneously with ethyl vinyl acetate (EVA), creating a new composite material. The external quantum efficiency of this material in a Si photovoltaic mini-module has shown that this compound is an active species with application in solar cells since it can move the photons of the incident radiation (UV region) to longer wavelengths.

1,3-Dithianes as Assembling Ligands for the Construction of Copper(I) Coordination Polymers. Investigation of the Impact of the RC(H)S2C3H6 Substituent and Reaction Conditions on the Architecture of the 0D-3D Networks

The parent compound 1,3-dithiane (L1) was reacted with CuI providing the 1D coordination polymer [{Cu(μ₂-I)₂Cu}(μ₂-L1)₂] _n (CP1), an isostructural compound [{Cu(μ₂-Br)₂Cu}(μ₂-L1)₂] _n (CP2) was isolated upon treatment of CuBr with L1. In contrast, treatment of L1 with CuCl results in the formation of 2D polymeric [{Cu(μ₂-Cl)₂Cu}(μ₂-L1)] _n (CP3), in which each sulfur atom acts as a 4-electron donor. The 1D compounds [{Cu(μ₂-X)₂Cu}(μ₂-L2)₂] _n (CP7, X = Br, and CP8, X = Cl) resulting from treatment of 2-methyl-1,3 dithiane (L2) with CuBr and CuCl are isostructural with their CuI homologue [{Cu(μ₂-I)₂Cu}(μ₂-L2)₂] _n (CP5), reported previously. Using CuCN, a 2D CP of composition [{Cu(μ₂-CN)₂Cu}(μ₂-L2)₂] _n (CP9) has been isolated. Complexation of 2-isobutyl-1,3-dithiane (L3) on CuI generates a 2D material [{Cu₃(μ₃-I)(μ₂-I)₂(μ₂-L3)₂}] _n (CP10), incorporating the usual trinuclear μ₃-I-capped Cu clusters as SBUs, whereas 2D-polymeric compounds [{Cu(μ₂-Br)₂Cu}(μ₂-L3)₂] _n (CP11) and [{Cu(μ₂-Cl)₂Cu}(μ₂-L3)₂] _n (CP12) were obtained with CuBr and CuCl. Treatment of 2-Me₃Si-1,3-dithiane (L4) with CuX yields the series [{Cu₂(μ₄-X)(μ₂-X)}(μ₂-L4)] _n (CP13-CP15). With 2-phenyl-1,3-dithiane (L5), the outcome of the reaction with CuI depends on the reaction conditions. Reaction with CuI in MeCN provides a 1D ribbon [{Cu(μ₂-I)₂Cu}(MeCN)₂(μ₂-L5)₂] _n (CP16), whereas treatment of CuI with L5 in hot EtCN yields 2D-polymeric[{Cu₃(μ₃-I)(μ₂-I)₂(μ₂-L5)₂}] _n (CP17). A reversible phase transition from triclinic P1̅ to monoclinic P2₁/ m is observed when recording the structure of CP16 at five different temperatures in the 100-300 K range. Ligand L6 containing a ferrocenyl function at the 2-position was also probed as organometallic dithioether ligand. Reaction of L6 with 1 equiv of CuI produces the 0D dinuclear complex [{Cu(μ₂-I)₂Cu}(η¹-L6)₂(MeCN)₂] (D1), whereas treatment with 2 equiv of CuI affords the novel 1D CP [{Cu(μ₃-I)₂Cu}(μ-L6)] _n (CP18), in which both S atoms of one L6 molecule span two copper centers of the infinite (CuI) _n ribbon. Some selected results of thermal analyses and luminescence measurements are also presented.

Synthesis, crystal structure, and two-dimension correlation infrared spectroscopy on two novel Pr carboxylic acid coordination polymers

Two new coordination polymers [Pr(PCPA)₃(H₂O)]_n1 and [Pr₂(PCPA)₆(H₂O)₃]_n·nH₂O 2(PCPA = p-chlorophenoxyacetic acid) have been synthesized under similar conditions by the hydrothermal method and characterized by single-crystal X-ray diffraction, elemental analyses, powder X-ray diffraction (PXRD) analysis, IR spectroscopy, two-dimensional correlation infrared spectroscopy(2D-IR COS) and ultraviolet-visible diffuse reflection integral spectroscopy (UV-Vis DRIS). 1 displays a 1D infinite chain, which is further linked by O/CH⋯O hydrogen bonds to form a 3D supra-molecular architecture. 2 shows a 2D layer structure, which is extended by CH⋯Cl hydrogen bonds generating a 3D network. Noteworthy, we also studied 2D-IR COS under the thermal perturbation to contribute to the development of theory. The 2D-IR correlation spectroscopy analysis is consistent with the analysis of structure and it is superior to 1D IR spectroscopy especially in the coordinated carboxyl group.

Smart composite films of nanometric thickness based on copper-iodine coordination polymers. Toward sensors

One-pot reactions between CuI and methyl or methyl 2-amino-isonicotinate give rise to the formation of two coordination polymers (CPs) based on double zig-zag Cu2I2 chains. The presence of a NH2 group in the isonicotinate ligand produces different supramolecular interactions affecting the Cu-Cu distances and symmetry of the Cu2I2 chains. These structural variations significantly modulate their physical properties. Thus, both CPs are semiconductors and also show reversible thermo/mechanoluminescence. X-ray diffraction studies carried out under different temperature and pressure conditions in combination with theoretical calculations have been used to rationalize the multi-stimuli-responsive properties. Importantly, a bottom-up procedure based on fast precipitation leads to nanofibers of both CPs. The dimensions of these nanofibres enable the preparation of thermo/mechanochromic film composites with polyvinylidene difluoride. These films are tens of nanometers in thickness while being centimeters in length, representing smaller thicknesses so far reported for thin-film composites. This nanomaterial integration of CPs could represent a source of alternative nanomaterials for opto-electronic device fabrication.

Supramolecular Interactions Modulating Electrical Conductivity and Nanoprocessing of Copper-Iodine Double-Chain Coordination Polymers

Two coordination polymers (CPs), based on Cu(I)-I double zig-zag chains bearing isonicotinic acid or 3-chloroisonicotinic acid as terminal ligands with molecular recognition capabilities, have been synthesized and fully characterized. Both compounds present extended networks with supramolecular interactions directed by the formation of H-bonds between the complementary carboxylic groups, giving supramolecular sheets. The chloro substituent allows establishing additional Cl···Cl supramolecular interactions that reinforce the stability of the supramolecular sheets. These CPs are semiconductor materials; however, the presence of chlorine produces slight changes in the I-Cu-I chains, generating a worse overlap in the Cu-I orbitals, thus determining a decrease in its electrical conductivity value. These experimental results have also been corroborated by theoretical calculations using the study of the morphology of the density of states and 3D orbital isodensities, which determine that conductivity is mostly produced through the Cu-I skeleton and is less efficient in the case of the chloro derivative compound. A fast and efficient bottom-up approach based on the self-assembly of the initial building blocks and the low solutibility of these CPs has proved very useful for the production of nanostructures.

The 3D [(Cu2Br2){μ-EtS(CH2)4SEt}]n material: a rare example of a coordination polymer exhibiting triplet–triplet annihilation

A very rare case of excitation energy migration has been observed for an inorganic material.

Can a highly flexible copper(i) cluster-containing 1D and 2D coordination polymers exhibit MOF-like properties?

The p-TolS(CH₂)₈STol-p and p-tBuC₆H₄S(CH₂)₈SC₆H₄-tBu-p ligands react with CuI respectively in MeCN and EtCN and in EtCN form the 2D and 1D polymers [Cu₈I₈(p-TolS(CH₂)₈STol-p)₃(solvent)₂]_n (solvent = MeCN, EtCN) and [Cu₄I₄(p-tBuC₆H₄S(CH₂)₈SC₆H₄-tBu-p)₂(EtCN)]_n susceptible to exchange solvent molecules.

Assembly of photoluminescent [CunIn] (n = 4, 6 and 8) clusters by clickable hybrid [N,S] ligands

The controlled growth of luminescent copper(i)-iodide clusters has been achieved by tuning the structure of hybrid NS ligands using click chemistry.

Reversible stimulus-responsive Cu(i) iodide pyridine coordination polymer

A coordination polymer based on CuI double chains with substituted pyrimidine is a dynamic and reversible material very sensible to both physical and chemical stimuli.