[P2V3W15O62]9− cluster based covalent polyoxometalate-organic hybrid: Synthesis, structure, self-assembly and in vitro antioxidant activities

Novel phenolate salts of bioactive agents: Cannabidiol phenolate salts

Bioactive phenolic compounds are commonly found in medications, with examples including apomorphine, estrone, thymol, estradiol, propofol, o-phenylphenol, l-Dopa, doxorubicin, tetrahydrocannabinol (THC), and cannabidiol (CBD). This study is the first to explore the creation and assessment of metal and ammonium phenolate salts using CBD as an example. CBD is used in medicine to treat anxiety, insomnia, chronic pain, and inflammation, but its bioavailability is limited due to poor water solubility. In this study exploit a synthetic route to convert CBD into anionic CBD-salts to enhance water solubility. Various CBD-salts with metal and ammonium counterions such as lithium (Li+), sodium (Na+), potassium (K+), choline hydroxide ([(CH3)3NCH2CH2OH]+), and tetrabutylammonium ([N(C4H9)4]+) have been synthesized and characterized. These salts are obtained in high yields, ranging from 74 % to 88 %, through a straightforward dehydration reaction between CBD and alkali metal hydroxides (LiOH, NaOH, KOH) or ammonium hydroxides (choline hydroxide, tetrabutylammonium hydroxide). These reactions are conducted in either ethanol, methanol, or a methanol:water mixture, maintaining a 1:1 molar ratio between the reactants. Comprehensive characterization using Fourier-Transform Infrared Spectroscopy (FT-IR), Nuclear Magnetic Resonance (NMR) spectroscopy, and elemental (CHN) analysis confirms the formation of CBD-salts, as evidenced by the absence of aromatic hydroxyl resonances or stretching frequencies. The molecular formulas of CBD salts were determined based on CHN analysis, and CBD quantification from acid regeneration experiments. Characterization data confirms that each CBD phenolate in a specific CBD salt was electrostatically stabilized by one of the either alkali metal or ammonium ion. The CBD-salts are highly susceptible to acidic conditions, readily reverting back to the original CBD. The percentage and purity of CBD in the CBD-metal/ammonium salts have been studied using High-Performance Liquid Chromatography (HPLC) analysis. Solubility studies indicate that the conversion of CBD into CBD salts significantly enhances its solubility in water, ranging from 110 to 1606 folds greater than pure CBD. Furthermore, the pharmacokinetic evaluation of oral administration of CBD-salts compared to CBD were determined in rats.

Antimicrobial dichloroisocyanurate-salts for controlled release of chlorine

Sodium dichloroisocyanurate (Na-DCC), a disinfectant known for rapid decomposition in water, loses its effectiveness with complete release of free available chlorine (FAC) in under an hour. To overcome this, a series of chlorine rich transition metal complexes/tetrabutylammonium (TBA) salts of DCC, including 2Na[Cu(DCC)₄], 2Na[Fe(DCC)₄], 2Na[Co(DCC)₄]·6H₂O, 2Na[Ni(DCC)₄]·6H₂O, and TBA[DCC]·4H₂O have been developed for extended chlorine release studies. The DCC-salts are synthesized based on the metathesis reaction process and are characterized using IR, NMR, CHN analyses, TGA,DSC, and Lovi bond colorimeter. The DCC-salts displayed poor water solubility and low decomposition chlorine release profile compared to Na-DCC. The water solubility of DCC-salts was reduced by a factor of 5.37 to 2500 compared to Na-DCC. The decomposition release of FAC from DCC-salts has been studied over time in comparison to Na-DCC in distilled water using a Lovi-bond colorimeter. DCC-salts displayed controlled FAC release profiles that varied from 1-13 days depending on the type of metal/TBA unit in them, whereas the parent Na-DCC displayed complete FAC release in about 0.91 h. For a proof of concept, the controlled release of metal from one of the DCC-metal complex salts, i.e., copper from the Cu-DCC is also investigated with a function of time in distilled water at RT. The 100% release of copper from Cu-DCC was identified over a period of 10 days. In addition, the applicability of DCC-salts as excellent antiviral agents against the bacteriophage T4 and antibacterial agents against Erwinia, Pseudomonas aeruginosa PA014 (Gram-negative), and Staphylococcus epidermidis (Gram-positive) compared to Na-DCC has been demonstrated.

From Simplicity to Complexity in Grafting Dawson-Type Polyoxometalates on Porphyrin, Leading to the Formation of New Organic-Inorganic Hybrids for the Investigation of Third-Order Optical Nonlinearities

Four new organic-inorganic hybrids, [N(C₄H₉)₄]₅H[{HNC₂O(CH₂O)₃P₂V₃W₁₅O₅₉}C₄₄N₄H₂₉O₃] (TPPOH-1POM), [N(C₄H₉)₄]₁₀H₂[{HNC₂O(CH₂O)₃P₂V₃W₁₅O₅₉}₂C₄₄N₄H₂₈O₂] (TPPOH-2POM trans), [N(C₄H₉)₄]₁₀H₂[{HNC₂O(CH₂O)₃P₂V₃W₁₅O₅₉}₂C₄₄N₄H₂₈O₂] (TPPOH-2POM cis), and [N(C₄H₉)₄]₁₅H₃[{HNC₂O(CH₂O)₃P₂W₁₅V₃O₅₉}₃C₄₄N₄H₂₇O] (TPPOH-3POM), have been synthesized by covalently grafting the Dawson-type polyoxometalate (POM) [N(C₄H₉)₄]₅[H₄P₂W₁₅V₃O₆₂] onto new porphyrins N-[1,3-dihydroxy-2-(hydroxymethyl)propan-2-yl]-4-[10,15,20-tris(4-hydroxyphenyl)porphyrin-5-yl]benzamide (TPPOH-1Tris), 4,4'-[5,15-bis(4-hydroxyphenyl)porphyrin-10,20-diyl]bis[ N-[1,3-dihydroxy-2-(hydroxymethyl)propan-2-yl]benzamide] (TPPOH-2Tris trans), 4,4'-[10,15-bis(4-hydroxyphenyl)porphyrin-5,20-diyl]bis[ N-[1,3-dihydroxy-2-(hydroxymethyl)propan-2-yl]benzamide] (TPPOH-2Tris cis). and 4,4',4″-[20-(4-hydroxyphenyl)porphyrin-5,10,15-triyl]tris[ N-[1,3-dihydroxy-2-(hydroxymethyl)propan-2-yl]benzamide] (TPPOH-3Tris), respectively, in N, N-dimethylacetamide under nitrogen. The hybrid compounds were thoroughly characterized by elemental analysis, FT-IR, NMR (¹H, 2D NOESY, ³¹P, and ⁵¹V), ESI-MS, MALDI-TOF-MS, UV-vis, and fluorescence spectroscopy. All porphyrins and their corresponding hybrids exhibited remarkable third-order nonlinear-optical responses under laser irradiation, with the intensity of light at focus E₀ being 4.2 μJ at wavelength 532 nm, pulse duration τ = 6 ns, and repetition rate 10 Hz. The molecular second hyperpolarizability (γ) values of the hybrids (TPPOH-1POM, TPPOH-2POM trans, TPPOH-2POM cis, TPPOH-3POM) were calculated to be 8.48 × 10^-28 esu, 8.94 × 10^-28 esu, 10.16 × 10^-28 esu, and 8.93 × 10^-28 esu, while the molecular second hyperpolarizability (γ) of their corresponding porphyrin precursors (TPPOH-1Tris, TPPOH-2Tris trans, TPPOH-2Tris cis, and TPPOH-3Tris) were 7.19 × 10^-28 esu, 8.09 × 10^-28 esu, 9.07 × 10^-28 esu, and 7.24 × 10^-28 esu, respectively. The γ values of the cis forms were found to be superior to those of all other compounds, indicating the significant role of the greater dipole moment and low symmetry of the cis form compared to other compounds. It was also found that the fluorescence intensity was decreased by 81.52%, 90.37%, 93.93%, and 84.62% for the hybrids TPPOH-1POM, TPPOH-2POM trans, TPPOH-2POM cis, and TPPOH-3POM with respect to their corresponding precursors, respectively, which reveals the Dawson-type POM as a strong quencher. This quenching phenomenon not only indicates again unequivocally the formation of hybrid compounds but also may imply a photoinduced electron/energy-transfer process favored from a porphyrin moiety to a Dawson-type POM moiety.

A mild post-functionalization method for the vanadium substituted P2W15V3 Wells–Dawson polyoxometalate based on a copper catalyzed azide–alkyne cycloaddition

A novel post-functionalization method for the vanadium substituted P₂W₁₅V₃ Wells–Dawson polyoxometalate has been developed using a copper catalyzed azide–alkyne cycloaddition.

Synthesis, structure, self-assembly and genotoxicity evaluation of a series of Mn-Anderson cluster based polyoxometalate–organic hybrids

A new series of POM–organic hybrids have been developed which show less genotoxicity compared to the parent polyoxometalate cluster.