Ultrasound-assisted synthesis of metal–organic framework nanorods of Zn-HKUST-1 and their templating effects for facile fabrication of zinc oxide nanorods via solid-state transformation

The green synthesis and applications of biological metal-organic frameworks for targeted drug delivery and tumor treatments

Biological metal-organic frameworks (bio-MOFs) constitute a growing subclass of MOFs composed of metals and bio-ligands derived from biology, such as nucleobases, peptides, saccharides, and amino acids. Bio-ligands are more abundant than other traditional organic ligands, providing multiple coordination sites for MOFs. However, bio-MOFs are typically prepared using hazardous or harmful solvents or reagents, as well as laborious processes that do not conform to environmentally friendly standards. To improve biocompatibility and biosafety, eco-friendly synthesis and functionalization techniques should be employed with mild conditions and safer materials, aiming to reduce or avoid the use of toxic and hazardous chemical agents. Recently, bio-MOF applications have gained importance in some research areas, including imaging, tumor therapy, and targeted drug delivery, owing to their flexibility, low steric hindrances, low toxicity, remarkable biocompatibility, surface property refining, and degradability. This has led to an exponential increase in research on these materials. This paper provides a comprehensive review of updated strategies for the synthesis of environmentally friendly bio-MOFs, as well as an examination of the current progress and accomplishments in green-synthesized bio-MOFs for drug delivery aims and tumor treatments. In conclusion, we consider the challenges of applying bio-MOFs for biomedical applications and clarify the possible research orientation that can lead to highly efficient therapeutic outcomes.

Green Ultrasound-Assisted Synthesis of Rare-Earth-Based MOFs

Rare-earth (RE)-based metal organic frameworks (MOFs) are quickly gaining popularity as flexible functional materials in a variety of technological fields. These MOFs are useful for more than just conventional uses like gas sensors and catalyst materials; in fact, they also show significant promise in emerging technologies including photovoltaics, optical, and biomedical applications. Using yttrium and europium as ionic host centres and dopants, respectively, and 1,3,5-benzenetricarboxylic acid (H3-BTC) as an organic linker, we describe a simple and green approach for the fabrication of RE-MOFs. Specifically, Y-BTCs and Eu-doped Y-BTCs MOFs have been synthesised in a single step using an eco-friendly method that makes use of ultrasound technology. To establish a correlation between the morphological and structural properties and reaction conditions, a range of distinct reaction periods has been employed for the synthetic processes. Detailed analyses of the synthesised samples through powder X-ray diffraction (PXRD), field emission scanning electron microscopy (FE-SEM), and Fourier-transform infrared spectroscopy (FT-IR) have confirmed the phase formation. Furthermore, thermal analyses such as thermogravimetric analysis (TGA) have been employed to evaluate the thermal stability and structural modifications of the Y-BTC and Eu-doped Y-BTC samples. Finally, the luminescent properties of the synthesised samples doped with Eu3+ have been assessed, providing an evaluation of their characteristics. As a proof of concept, an Eu-doped Y-BTC sample has been applied for the sensing of nitrobenzene as a molecule test of nitro derivatives.

Synthesis and characterization of ZnBTC-based MOFs: effect of solvents and salt

In this work, we studied the optimization of synthetic approaches to creating structurally modified metal-organic frameworks under various synthesis conditions. We investigated the influence of the various solvents and zinc salts on the structural characteristics of the metal-organic framework based on benzene-1,3,5-tricarboxylic acid (H3BTC). The results indicate that the variation of the types of both solvent and salt is a parameter affecting the crystallinity, phase purity, and morphology of the metal-organic framework. This was confirmed by comprehensive structural characterization (SEM, EDX, PXRD).

Research progress on near-infrared long persistent phosphor materials in biomedical applications

After excitation is stopped, long persistent phosphor materials (LPPs) can emit light for a long time. The most important feature is that it allows the separation of excitation and emission in time. Therefore, it plays a vital role in various fields such as data storage, information technology, and biomedicine. Owing to the unique mechanism of storage and luminescence, LPPs can avoid the interference of sample autofluorescence, as well as show strong tissue penetration ability, good afterglow performance, and rich spectral information in the near-infrared (NIR) region, which provides a broad prospect for the application of NIR LPPs in the field of biomedicine. In recent years, the development and applications in biomedical fields have been advanced significantly, such as biological imaging, sensing detection, and surgical guidance. In this review, we focus on the synthesis methods and luminescence mechanisms of different types of NIR LPPs, as well as their applications in bioimaging, biosensing detection, and cancer treatment in the field of biomedicine. Finally, future prospects and challenges of NIR LPPs in biomedical applications are also discussed.

Direct Synthesis of HKUST-1 onto Cotton Fabrics and Properties

Metal-organic frameworks are crystalline nanostructures formed by a metal interspersed by an organic binder. These metal-organic materials are examples of nanomaterials applied to textile material in search of new functionalized textiles. Cotton is a cellulosic fiber of great commercial importance, and has good absorption capacity and breathability; however, due to these characteristics, it is susceptible to the development of microorganisms on its surface. This work aims to analyze how the direct synthesis of HKUST-1 in cotton fabric modifies the chemical and physical properties. The material obtained was characterized by scanning electron microscopy to obtain its morphology, by spectrophotometry CIE L*a*b* to verify the color change, by a biological test to verify its resistance to microorganisms and, finally, by a unidirectional traction test to verify the change in its mechanical resistance. Thereby, it was possible to observe the formation of MOFs with the morphology of nanorods, and also, with regard to HKUST-1 in the cotton fabric, when applied, an elimination percentage higher than 99% was observed for both bacteria, E. coli and S. aureus. The presence of MOF was detected even after washing, however, the loss of 75% in the mechanical resistance of the material makes its potential for textile finishing unworkable.

Synthesis and shaping of metal-organic frameworks: a review

Metal-organic frameworks (MOFs) possess excellent advantages, such as high porosity, large specific surface area, and an adjustable structure, showing good potential for applications in gas adsorption and separation, catalysis, conductivity, sensing, magnetism, etc. However, they still suffer from significant limitations in terms of the scale-up synthesis and shaping, hindering the realization of large-scale commercial applications. Despite some attempts having been devoted to addressing this, challenges remain. In this paper, we outline the advantages and drawbacks of existing synthetic routes such as electrochemistry, microwave, ultrasonic radiation, green solvent reflux, room temperature stirring, steam-assisted transformation, mechanochemistry, and fluid chemistry in terms of scale-up production. Then, the shaping methods of MOFs such as extrusion, mechanical compaction, rolling granulation, spray drying, gel technology, embedded granulation, phase inversion, 3D printing and other shaping methods for the preparation of membranes, coatings and nanoparticles are discussed. Finally, perspectives on the large-scale synthesis and shaping of MOFs are also proposed. This work helps provide in-depth insight into the scale-up production and shaping process of MOFs and boost commercial applications of MOFs.

Fabrication of Zn-MOF/ZnO nanocomposites for room temperature H2S removal: Adsorption, regeneration, and mechanism

Zn-MOF/ZnO nanocomposites with different organic linkers were fabricated by a rapid ultrasonication method using freshly prepared Zn(OH)₂ precipitate. The high metal-to-ligand ratio led to the simultaneous formation of MOFs and ZnO nanoparticles in the MOFs. The surface area was in the range of 12-21 m² g^-1. The nanocomposites were tested for H₂S adsorption at room temperature, where the maximum adsorption capacity of 14.2 mg g^-1 was recorded for ZnBTC/ZnO in dry conditions. The spent adsorbents were regenerated using methanol and UV irradiation as individual and combined strategies. The successive effect of methanol and UV radiation led to an increased adsorption capacity in the second cycle. The spectroscopic investigation of spent ZnBDC/ZnO confirmed the chemisorption of H₂S over Zn-sites via Zn²⁺-S^2- interaction. The XPS analysis of regenerated ZnBDC/ZnO confirmed a decreased sulfur content and decreased Zn ionic character. The regeneration work in this study is one of the first attempts and could be extrapolated to well-studied Zn-MOFs like MOF-5 for the desulfurization process.

Recent advances in process engineering and upcoming applications of metal-organic frameworks

Progress in metal-organic frameworks (MOFs) has advanced from fundamental chemistry to engineering processes and applications, resulting in new industrial opportunities. The unique features of MOFs, such as their permanent porosity, high surface area, and structural flexibility, continue to draw industrial interest outside the traditional MOF field, both to solve existing challenges and to create new businesses. In this context, diverse research has been directed toward commercializing MOFs, but such studies have been performed according to a variety of individual goals. Therefore, there have been limited opportunities to share the challenges, goals, and findings with most of the MOF field. In this review, we examine the issues and demands for MOF commercialization and investigate recent advances in MOF process engineering and applications. Specifically, we discuss the criteria for MOF commercialization from the views of stability, producibility, regulations, and production cost. This review covers progress in the mass production and formation of MOFs along with future applications that are not currently well known but have high potential for new areas of MOF commercialization.

Metal Organic Frameworks (MOFs) and ultrasound: A review

Metal-organic frameworks (MOFs) have received a lot of attention due to their unique properties and abundant functionalities. Permanent porosity and high surface area are just a few traits that have made them attractive to researchers. They can be prepared as task-specific materials by exploiting the functional group variety and tuning their size and geometry. The main purpose of this review is to present an alternative method of preparing MOF crystals and underline the advantages of ultrasound assisted (sonochemical) synthesis. State of the art ultrasound assisted techniques for the preparation of MOFs in nanoscale are presented. Optimization of morphology and particle size is highlighted throughout this work, as we discuss the effects of various factors, such as energy input, reagent concentration, adequate solvents, reaction time and more.

Sustainable Synthesis of Co@NC Core Shell Nanostructures from Metal Organic Frameworks via Mechanochemical Coordination Self-Assembly: An Efficient Electrocatalyst for Oxygen Reduction Reaction

Herein, a new type of cobalt encapsulated nitrogen-doped carbon (Co@NC) nanostructure employing Zn_x Co_1-x (C₃ H₄ N₂ ) metal-organic framework (MOF) as precursor is developed, by a simple, ecofriendly, solvent-free approach that utilizes a mechanochemical coordination self-assembly strategy. Possible evolution of Zn_x Co_1-x (C₃ H₄ N₂ ) MOF structures and their conversion to Co@NC nanostructures is established from an X-ray diffraction technique and transmission electron microscopy analysis, which reveal that MOF-derived Co@NC core-shell nanostructures are well ordered and highly crystalline in nature. Co@NC-MOF core-shell nanostructures show excellent catalytic activity for the oxygen reduction reaction (ORR), with onset potential of 0.97 V and half-wave potential of 0.88 V versus relative hydrogen electrode in alkaline electrolyte, and excellent durability with zero degradation after 5000 potential cycles; whereas under similar experimental conditions, the commonly utilized Pt/C electrocatalyst degrades. The Co@NC-MOF electrocatalyst also shows excellent tolerance to methanol, unlike the Pt/C electrocatalyst. X-ray photoelectron spectroscopy (XPS) analysis shows the presence of ORR active pyridinic-N and graphitic-N species, along with CoN_x C_y and CoN_x ORR active (M-N-C) sites. Enhanced electron transfer kinetics from nitrogen-doped carbon shell to core Co nanoparticles, the existence of M-N-C active sites, and protective NC shells are responsible for high ORR activity and durability of the Co@NC-MOF electrocatalyst.

In-vitro synthesis of marble apatite as a novel adsorbent for removal of fluoride ions from ground water: An ultrasonic approach

Marble waste powder consisting of calcium and magnesium compounds was used to synthesize a novel biocompatible product, marble apatite (MA) primarily hydroxyapatite (Hap) for applications in defluoridation of drinking water. Synthesis of marble apatite was carried out by using calcium compounds (mixture of hydroxide and nitrate) extracted from marble waste powder which was treated with potassium dihydrogen phosphate at 80°C under alkaline conditions using conventional precipitation method (CM) and ultrasonication method (USM). Qualitative analysis of synthesized marble apatite from both the methods was carried out using FTIR, phase analysis by XRD and microstructure analysis by SEM and TEM. When ultrasonication (USM) method was used, the yield of marble apatite was improved from 67.5% to 78.4%, with reduction in crystallite size (58.46nm), lesser agglomeration and comparatively well-defined spherical morphology compared to the CM method. Studies also include estimation of the defluoridation capacity of MA as an adsorbent for drinking water treatment and effects of process parameters such as pH, contact time, initial fluoride concentration, dosage and presence of other co-ions on fluoride removal capacity. The results showed that the experimental adsorption capacity of the marble apatite synthesized using USM method was significantly higher (1.826mg/g) than marble apatite synthesized using conventional method (0.96mg/g) at pH 7 with a contact time of 90min. The mechanism of adsorption was studied, and it was observed that Langmuir isotherm model fitted best to the experimental data, while the kinetic studies revealed that the process followed pseudo-second order model. This novel compound, marble apatite synthesized from marble waste powder is found to be promising for defluoridation of drinking water and will help in alleviating the problems of fluorosis as well as reduce the problems of disposal of marble waste.

Surface acoustic wave (SAW)-induced synthesis of HKUST-1 with different morphologies and sizes

Metal organic frameworks (MOFs) are porous materials that have wide application prospects.

Synthesis and Electrospraying of Nanoscale MOF (Metal Organic Framework) for High-Performance CO2 Adsorption Membrane

We report the sonochemical synthesis of MOF (metal organic framework) nanoparticles of 30-200 nm in size and electrospraying of those particles on electrospun nanofibers to process a MOF-attached nanofibrous membrane. This membrane displayed significant selectivity towards CO₂ and capacity of adsorbing with 4000-5000 ppm difference from a mixed gas flow of 1% CO₂ and 99% N₂. Applying ultrasonic waves during the MOF synthesis offered rapid dispersion and formation of crystalline MOF nanoparticles in room temperature. The MOF nanoparticles of 100-200 nm in size displayed higher surface area and adsorption capacity comparing to that of 30-60 nm in size. Nanofibrous membrane was produced by electrospinning of MOF blended PAN solution followed by electrospraying of additional MOF nanoparticles. This yielded uniform MOF deposition on nanofibers, occurred due to electrostatic attraction between highly charged nanoparticles and conductive nanofibers. A test bench for real-time CO₂ adsorption at room temperature was built with non-dispersive Infrared (NDIR) CO₂ sensors. Comparative tests were performed on the membrane to investigate its enhanced adsorption capacity. Three layers of the as-produced membranes displayed CO₂ adsorption for approximately 2 h. Thermogravimetric analysis (TGA) of the membrane showed the thermal stability of the MOF and PAN up to 290 and 425 °C, respectively.