A 3D metal-organic framework with isophthalic acid linker for photocatalytic properties

Synthesis, structural characterization, DFT and molecular dynamics simulations of dinuclear (μ-hydroxo)-bridged triethanolamine copper(II) complexes: efficient candidates towards visible light-mediated photo-Fenton degradation of organic dyes

Multinuclear (di/tri) copper(II) complexes bridged through hydroxyl groups are very interesting coordination complexes owing to their potential applications in various fields. In this work, three novel dinuclear (μ-hydroxo)-bridged copper(II) complexes in the crystal form, namely, [Cu2(3,5-DIFLB)2(H2tea)2](H2O) (1), [Cu2(4-ClB)2(H2tea)2](H2O) (2), and [Cu2(4-ETHB)2(H2tea)2](H2O)2 (3) (where DIFLB = difluorobenzoate, CLB = chlorobenzoate, ETHB = ethoxybenzoate, and H3tea = triethanolamine), were isolated at room temperature using methanol and water in a 4 : 1 v/v ratio as a solvent. Furthermore, all three complexes (1-3) were characterised using spectroscopic (UV-vis, DRS, and FT-IR), electrochemical (CV) and single-crystal X-ray diffraction techniques. Structural insights gained by packing analysis revealed the role of steric constraints of substituents and various non-covalent interactions in lattice stabilization, which were indeed supported by theoretical and molecular electrostatic potential illustrations. Hirshfeld surface analysis provided quantitative verification about various non-covalent interactions (interatomic contacts) involved in the packing of molecules. Interestingly, as a potential application, complexes 1-3 all exhibited remarkable visible light-mediated photo-Fenton degradation of approximately 98% for 50 ppm concentration of organic dyes (fuchsin basic (FB) and methyl orange (MO)) in 90 minutes with the optimized conditions of 1 mg mL-1 of dye solution. In all the cases, dye degradation by these materials was ascribed to the symbiotic relations among the molecular structures of complexes 1-3, which were endowed with various electron-withdrawing and electron-releasing substituents and ionic strength, with respect to the structure, shape and interacting patterns of dye molecules. The adsorption mechanism indicates that various weak interactions between the donor and acceptor groups of complexes and dyes, such as electrostatic, hydrogen bonding, and direct coordination to metal sites, play a crucial role, which is confirmed by molecular dynamics (MD) simulations. Theoretical studies by DFT-based descriptors, molecular electrostatic potentials, and band gaps provided deep insights into various electronic and reactivity parameters. For subsequent processes of dye degradation, complexes 1-3 were stable and recoverable. The successful integration of experimental and theoretical approaches sheds light on copper-based dinuclear stable coordination complexes, showcasing a significant step towards the development of novel heterogeneous photo-Fenton catalysts.

Electrochemiluminescence Properties and Sensing Application of Zn(II)-Metal-Organic Frameworks Constructed by Mixed Ligands of Para Dicarboxylic Acids and 1,10-Phenanthroline

Four metal-organic frameworks (MOFs) were designed and prepared through a mixed-ligand strategy by controlling the combination of various dicarboxylic acid ligands with invariant center metal and o-phenanthroline heterocyclic ligand. The regulatory effects of ligand electronic band and crystal structure on the electrochemiluminescence (ECL) characteristics of MOFs were verified by experimental results and density functional theory (DFT) calculations. The flexible chain structure of MOF-2 promotes electron transfer between MOF electroactive free radicals and the co-reactant, making it show outstanding ECL characteristics among all of the four MOFs with the luminescence quantum efficiency 8.37 times that of tris(bipyridine)-ruthenium(II) ([Ru(bpy)3]2+). Meanwhile, a new ECL mechanism for MOF luminescent crystal materials with reactive oxygen species in solvents as a co-reactant in the aqueous aerobic environment has been proposed. MOF-2 was selected to construct an ECL sensor for the determination of glucose in human urine samples. This study provides a useful idea for the development and design of new luminescent molecular crystal materials.

Synthesis of a Mixed-Ligand H-Bonded Cu Coordination Polymer: Exploring the pH-Dependent High Photocatalytic Degradation of Rhodamine 6G, Methyl Violet, Crystal Violet, and Rose Bengal Dyes under Room Illumination

A new mixed-ligand H-bonded coordination polymer {[Cu2(Or)2(Bimb)3]·4H2O} n (KA@CP-S) has been prepared hydrothermally using basic copper carbonate with 1,4-bis[(1H-imidazol-1-yl)methyl]benzene (Bimb) and potassium orotate (OrK) ligands. According to topological studies, KA@CP-S has a new topology with a three-connected uninodal net with point symbol (PS) {82·12}2{8}3. The KA@CP-S was employed as a catalyst for screening of a series of harmful cationic, anionic, and neutral organic dyes in contaminated water. The photocatalytic degradation study shows that it exhibits good catalytic efficiency for cationic dyes like Crystal Violet (CV, 75.8%), Methyl Violet (MV, 76.8%), and Rhodamine 6G (Rh6G, 86.5%) and Rose Bengal (RB, 76.1%), which is an anionic dye, while for a neutral dye, its catalytic efficiency is only 72% (Neutral Red) at ambient temperature. The effect of pH on photocatalytic degradation was also analyzed. The degradation experiment reveals that the detection limits of KA@CP-S for mostly catalyzed colorant concentrations in contaminated water are 0.60 ppm (CV), 0.20 ppm (RB), 0.33 ppm (MV), and 0.20 ppm (Rh6G) at pH 12, 4, and 10. The degradation of dyes follows pseudo-first-order kinetics. The excellent catalytic property and regeneration ability of KA@CP-S make it a potential and efficient future remedial material for the detection and separation of toxic dyes from wastewater contaminated by industrial effluents.

Limitation of room temperature phosphorescence efficiency in metal organic frameworks due to triplet-triplet annihilation

The effect of triplet-triplet annihilation (TTA) on the room-temperature phosphorescence (RTP) in metal-organic frameworks (MOFs) is studied in benchmark RTP MOFs based on Zn metal centers and isophthalic or terephthalic acid linkers (ZnIPA and ZnTPA). The ratio of RTP to singlet fluorescence is observed to decrease with increasing excitation power density. Explicitly, in ZnIPA the ratio of the RTP to fluorescence is 0.58 at 1.04 mW cm−2, but only 0.42 at (the still modest) 52.6 mW cm−2. The decrease in ratio is due to the reduction of RTP efficiency at higher excitation due to TTA. The density of triplet states increases at higher excitation power densities, allowing triplets to diffuse far enough during their long lifetime to meet another triplet and annihilate. On the other hand, the shorter-lived singlet species can never meet an annihilate. Therefore, the singlet fluorescence scales linearly with excitation power density whereas the RTP scales sub-linearly. Equivalently, the efficiency of fluorescence is unaffected by excitation power density but the efficiency of RTP is significantly reduced at higher excitation power density due to TTA. Interestingly, in time-resolved measurements, the fraction of fast decay increases but the lifetime of long tail of the RTP remains unaffected by excitation power density. This may be due to the confinement of triplets to individual grains, leading decay to be faster until there is only one triplet per grain left. Subsequently, the remaining “lone triplets” decay with the unchanging rate expressed by the long tail. These results increase the understanding of RTP in MOFs by explicitly showing the importance of TTA in determining the (excitation power density dependent) efficiency of RTP. Also, for applications in optical sensing, these results suggest that a method based on long tail lifetime of the RTP is preferable to a ratiometric approach as the former will not be affected by variation in excitation power density whereas the latter will be.

Construction of a mixed ligand MOF as "green catalyst" for the photocatalytic degradation of organic dye in aqueous media

In the past few years, metal-organic frameworks (MOFs) have emerged as a class of fascinating materials for photocatalysis. Herein, a new MOF formulated as [Zn(bpe)(fdc)]·2DMF (BUT-206, bpe = 1,2-bis(4-pyridyl) ethylene, H2fdc = 2,5-furan dicarboxylic acid, DMF = N,N-dimethylformamide) is reported, which was synthesized under solvothermal conditions and applied for photocatalytic degradation of dyes (crystal violet and rhodamine B). Noteworthily, BUT-206 exhibited high photocatalytic activity toward the degradation of crystal violet without using any photosensitizer or cocatalyst under UV-irradiation. The photocatalytic degradation of crystal violet by BUT-206 was effective with a degradation efficiency of 92.5% within 120 minutes. The effects of key parameters including pH, amount of photocatalyst and initial concentration of dye on the dye degradation processes were examined, and the kinetics of dye degradation was established by the pseudo-first order kinetic equation. Furthermore, BUT-206 showed good cyclic stability in photocatalytic performance for up to five regeneration cycles, making it a potential green catalyst for dye degradation.

New frontiers and prospects of metal-organic frameworks for removal, determination, and sensing of pesticides

Pesticides have been widely used in agriculture to control, reduce, and kill insects. Humans are also being using pesticides to control insidious animals in daily life. By these practices, a huge volume of pesticides is introduced to the environment. Despite broad-spectrum applicability, pesticides also have hazardous effects on both humans and animals at high and low concentrations. Long-term exposure to pesticides can cause different diseases, like leukemia, lymphoma, and cancers of the brain, breasts, prostate, testis, and ovaries. Reproductive disorders from pesticides include birth defects, stillbirth, spontaneous abortion, sterility, and infertility. Therefore, the application of determination and treatment methods for pre-concentration and removal of these toxic materials from the environment appears a vital concern. To date, different materials and approaches have been employed for these purposes. Among these approaches, multifunctional metal-organic frameworks (MOFs)-assisted adsorption and determination processes have always been in the spotlight. These facts are due to exclusive properties of MOFs in terms of the crystallinity, large surface area, high chemical, and physical stability, and controllable structure as well as unique features of adsorption and determination process in terms of simple, easy, cheap, available method and ability to use in large and industrial scales. In the present work, we illustrate the exceptional features of MOFs as well as the possible mechanism for the adsorption of pesticides by MOFs. The use of these fantastic materials for pre-concentration and removal of pesticides are extensively explored. In addition, the performance of MOFs was compared with other adsorbents. Finally, the new frontiers and prospects of MOFs for the determination, sensing, and removal of pesticides are presented.

Syntheses, design strategies, and photocatalytic charge dynamics of metal–organic frameworks (MOFs): a catalyzed photo-degradation approach towards organic dyes

The presented review focuses on design strategies to develop tailor-made MOFs/CPs of main group, transition and inner-transition elements and their photocatalytic properties to decompose dyes in wastewater discharge and their photocatalytic mechanism.

A new set of metal–organic frameworks synthesised from diisophthalate-based, 2′-phosphorus-substituted m-terphenyl linker molecules

Four metal–organic frameworks employing the m-terphenyl diisophthalate linker molecule with 2′ substitution by P(v)-based functional groups of the central aryl have been synthesised.

Temperature tuned syntheses of two new d10-based Cd(ii) cluster metal–organic frameworks: luminescence sensing and photocatalytic properties

The solvothermal reactions of 5,5′-(1,4-phenylenebis(methyleneoxy))diisophthalic acid (H₄L) and the N-donor ancillary ligand 3,3′,5,5′-tetramethyl-4,4′-bipyrazole (bpz) with cadmium(ii) salts at two different reaction temperatures yielded two new metal–organic frameworks (MOFs), viz., [Cd(H₂L)(bpz)]_n (1) and [Cd₂(H₄L)(L)(bpz)₂]_n (2), which have been characterized by FTIR and single crystal X-ray diffraction. The single crystal X-ray diffraction studies revealed that 1 displays a 3-periodic network with monometallic SBU, while 2 exhibits a 3-periodic network with a 2-fold interpenetration feature. The effects of variation in reaction temperature on the architecture of MOFs 1 and 2 have been discussed. The luminescence investigation indicates that both 1 and 2 displayed good turn-off luminescence sensing against nitroaromatic compounds (NACs), especially m-nitrophenol (MNP), via a decrease in their luminescence intensities with a K_sv value of 6.43 × 10³ for 1 and 2.03 × 10⁴ for 2 and LOD values of 1.09 and 0.81 ppm for 1 and 2, respectively. The plausible mechanism for the decline in luminescence intensity of the MOFs with NACs has been addressed using theoretical calculations. The photocatalytic properties for both the MOFs demonstrated that they display efficient photocatalytic performances to degrade methyl violet (MV) under UV irradiation. The plausible mechanism through which these MOFs exhibited photocatalytic properties has been suggested using band gap calculations.

Two new d¹⁰-based Cd(ii) MOFs were synthesized and their photoluminescence sensing to selectively detect m-nitrophenol (MNP) and ability to decompose the organic dye methyl violet (MV) were explored.