A bi-functional 3D PbII–organic framework for Knoevenagel condensation reaction and highly selective luminescent sensing of Cr2O72−

Two pillared-layer metal-organic frameworks based on the pinwheel trinuclear carboxylate-clusters of Zn(II) and Co(II): synthesis, crystal structures, magnetic study, and Lewis acid catalysis

Using a dicarboxylic acid, [1,1'-biphenyl]-4,4'-dicarboxylic acid (H₂L1) and an exobidentate ligand, (1E,1'E)-N,N'-(1,4-phenylene)bis(1-(pyridin-4-yl)methanimine) (L2), two 3D interpenetrated networks, {[Zn₃(L1)₃(L2)]·9H₂O}_n (Zn-MOF) and {[Co₃(L1)₃(L2)(DMF)]·0.5DMF}_n (Co-MOF), have been prepared in good yields. The crystal structure analysis of Zn-MOF and Co-MOF revealed that both have a 3D pillared-layer structure based on pinwheel trinuclear metal-carboxylate clusters as secondary building units (SBUs). Furthermore, the structures also exhibited three-fold interpenetration. Although the overall networks in Zn-MOF and Co-MOF showed significant resemblances, there are marked differences in their crystal structures, which are associated with the coordination environment of the metal centre and the binding modes of the carboxylates. Gas adsorption studies (N₂ at 77 K and 1 bar) indicated that Co-MOF is more porous than Zn-MOF. Magnetic measurements on Co-MOF indicate a significant antiferromagnetic interaction (45 K to 303 K) between trimeric Co(II) S = 3/2 spins through syn-syn carboxylato bridges. Both MOFs were studied for the Lewis acid catalyzed Knoevenagel condensation reactions between benzaldehydes and malononitrile with an active methylene group, where Zn-MOF was found to be a better catalyst than Co-MOF. This was supported by the Monte Carlo simulations indicating the better substrate binding ability of Zn-MOF than Co-MOF.

High-Quality Conjugated Polymers Achieving Ultra-Trace Detection of Cr2O72− in Agricultural Products

In view of that conjugated polymers (CPs) are an attractive option for constructing high-sensitive Cr₂O₇²⁻ sensors but suffer from lacking a general design strategy, we first proposed a rational structure design of CPs to tailor their sensing properties while validating the structure-to-performance correlation. Short side chains decorated with N and O atoms as recognition groups were instructed into fluorene to obtain monomers Fmoc-Ala-OH and Fmoc-Thr-OH. Additionally, their polymers P(Fmoc-Ala-OH) and P(Fmoc-Thr-OH) were obtained through electrochemical polymerization. P(Fmoc-Ala-OH) and P(Fmoc-Thr-OH) with high polymerization degrees have an excellent selectivity towards Cr₂O₇²⁻ in comparison to other cations and anions. Additionally, their limit of detection could achieve 1.98 fM and 3.72 fM, respectively. Especially, they could realize the trace detection of Cr₂O₇²⁻ in agricultural products (red bean, black bean, and millet). All these results indicate that short side chains decorated with N and O atoms functionalizing polyfluorene enables the ultra-trace detection of Cr₂O₇²⁻. Additionally, the design strategy will spark new ideas for the construction of highly selective and sensitive Cr₂O₇²⁻ sensors.

Two porous three-dimensional (3D) metal–organic frameworks based on diverse metal clusters: selective sensing of Fe3+ and Cr2O72−

Using a rigid 3,5-di(2′,5′-dicarboxylphenyl)benzoic acid, two porous 3D MOFs have been synthesized and characterized, and the luminescent properties have been studied.

The crystal structure of 3-amino-5-carboxypyridin-1-ium bromide, C6H7BrN2O2

C6H7BrN2O2, triclinic, P 1 ‾ $P‾{1}$ (no. 2), a = 7.3026(4) Å, b = 7.4618(4) Å, c = 7.8746(4) Å, α = 81.542(3)°, β = 89.459(3)°, γ = 61.718(3)°, V = 372.86(4) Å3, Z = 2, R gt (F) = 0.0209, wR ref (F 2) = 0.0473, T = 150(2) K.

The crystal structure of 3-amino-5-carboxypyridin-1-ium perchlorate monohydrate, C6H9ClN2O7

C6H9ClN2O7, triclinic, P 1 ‾ $\bar{1}$ (no. 2), a = 6.8667(4) Å, b = 7.5196(4) Å, c = 10.0908(5) Å, α = 74.237(2)∘, β = 81.603(3)∘, γ = 88.888(3)∘, V = 495.95(5) Å3, Z = 2, R gt (F) = 0.0377, wR ref (F 2) = 0.0902, T = 150(2) K.

Three Zn(ii) coordination polymers constructed with a new amide-thiophene-derived bis-pyridyl ligand as ultrasensitive luminescent sensors for Hg(ii) and purines

A new amide-thiophene-derived ligand (4-bpft) was designed and used to construct three LCPs 1–3, which could detect Hg(ii), adenine, and guanine.

A Multifunctional Tb-MOF Detector for H2O2, Fe3+, Cr2O7 2-, and TPA Explosive Featuring Coexistence of Binuclear and Tetranuclear Clusters

A novel three-dimensional microporous terbium(III) metal-organic framework (Tb-MOF) named as [Tb10 (DBA)6(OH)4(H2O)5]·(H3O)4 (1), was successfully obtained by a solvothermal method based on terbium nitrate and 5-di(2',4'-dicarboxylphenyl) benzoic acid (H5DBA). The Tb-MOF has been characterized by single crystal X-ray diffraction, elemental analysis, thermogravimetry, and fluorescence properties, and the purity was further confirmed by powder X-ray diffraction (PXRD) analysis. Structural analysis shows that there are two kinds of metal cluster species: binuclear and tetranuclear, which are linked by H5DBA ligands in two μ7 high coordination fashions into a three-dimensional microporous framework. Fluorescence studies show that the Tb-MOF can detect H2O2, Fe3+, and Cr2O7 2- with high sensitivity and selectivity and can also be used for electrochemical detection of exposed 2,4,6-trinitrophenylamine (TPA) in water. The highly selective and sensitive detection ability of the Tb-MOF might make it a potential multifunctional sensor in the future.

A pH-stable Ag(i) multifunctional luminescent sensor for the efficient detection of organic solvents, organochlorine pesticides and heavy metal ions

Developing novel luminescent materials for sensitive and rapid detection of heavy metal ions, organic solvents and organochlorine pesticides is vital for environmental monitoring. Herein, a new Ag(i) luminescent coordination polymer [Ag(3-dpyb)(H₃odpa)]·H₂O (LCP 1) (3-dpyb = N,N′-bis(3-pyridinecarboxamide)-1,4-butane, H₄odpa = 4,4′-oxydiphthalic acid) was obtained by a hydrothermal reaction and characterized by single crystal, powder X-ray diffraction, infrared spectroscopy, thermogravimetric analysis and luminescence spectroscopy. LCP 1 is a three-dimensional (3D) supramolecular framework formed from 1D [Ag-3-dpyb-H₃odpa]_n chains and H-bond interactions. The luminescence sensing study of LCP 1 for recognizing organic solvents, organochlorine pesticides and heavy metal ions was performed, which demonstrated it to be a potential luminescent sensor for Hacac, NB, 2,6-DCN, Fe²⁺, Hg²⁺, and Fe³⁺. Fe²⁺, Hg²⁺, and Fe³⁺ in river water were determined using LCP 1 with satisfying recovery.

3D supramolecular LCP 1 can detect Hacac, NB, 2,6-DCN, Fe²⁺, Hg²⁺, and Fe³⁺ with a low detection limit and pH stability.

Uranyl Organic Framework as a Highly Selective and Sensitive Turn-on and Turn-off Luminescent Sensor for Dual Functional Detection Arginine and MnO4. Inorg Chem 2020;59:5004-5017. [PMID: 32207299 DOI: 10.1021/acs.inorgchem.0c00236]

Five new uranyl coordination polymers were prepared by the hydrothermal method based on 5-nitroisophthalic acid (H₂nip) as (UO₂)(nip)(2,2'-bpy) (1), (H₂4,4'-bpy)·[(UO₂)₃(nip)₄]·(4,4'-bpy) (2), (H₂bpe)·[(UO₂)_0.5(nip)] (3), (H₂ bpp)·[(UO₂)₂-(nip)₃]·H₂O (4), and (H₂tmp)·[(UO₂)(nip)₂](5) [2,2'-bpy = 2,2'-bipyridine, 4,4'-bpy = 4,4'-bipyridine, bpe = 4,4'-vinylenedipyridine, bpp = 4,4' -trimethylenedipyridine, tmp = tetramethylpyrazine]. All of these synthesized complexes have been characterized by single crystal and powder X-ray diffraction, IR spectra, thermogravimetric analysis, elemental analysis, and luminescent properties. In particular, it is found that compounds 1 and 4 can be used as a luminescent sensor to efficiently detect arginine in aqueous solution by means of "turn-on"; the detection limits were 1.06 × 10^-6 and 6.42 × 10^-6 mol/L, respectively. Moreover, 4 can also be used as a bifunctional sensor for selective sensing of MnO₄^- anion by "turn-off". The detection limit of MnO₄^- in water was 1.79 × 10^-6 mol/L; the K_sv was 1.88 × 10⁴. The sensing effect of arginine in simulated grape juice samples and MnO₄^- in simulated river water samples was also investigated by this sensing system with high recovery. In addition, the possible mechanism of sensing arginine and MnO₄^- in the aqueous solution was discussed.