Synthesis of amorphous mesoporous TiO2-SiO2 and its excellent catalytic performance in oxidative desulfurization

The Utilization of Rice Husk as Both the Silicon Source and Mesoporous Template for the Green Preparation of Mesoporous TiO2/SiO2 and Its Excellent Catalytic Performance in Oxidative Desulfurization

In recent years, TiO2-based catalysts have received extensive attention from researchers for their excellent oxidative desulfurization (ODS) performances. In this paper, a series of mesoporous TiO2/SiO2 catalysts with different TiO2 loadings are prepared, using an incipient wetness impregnation method with agricultural waste rice husk as both the silicon source and mesoporous template and tetrabutyl titanate as the titanium source. The effect of different TiO2 loadings on the ODS performance of the samples is investigated, and the appropriate TiO2 loading is 2.5%. Compared with pure TiO2, the 2.5%TiO2/SiO2 sample exhibits high catalytic activity for oxidative desulfurization. This is, on the one hand, due to the high specific surface area and mesopore volume of the 2.5%TiO2/SiO2 sample. On the other hand, it is due to the uniform dispersion of TiO2 grains with an average diameter of 6.1 nm on the surface of the mesoporous SiO2 carrier, which greatly increases the active sites of the 2.5%TiO2/SiO2 sample, thus improving the catalytic activity of the sample. The recycling performances of the 2.5%TiO2/SiO2 sample are further investigated. The results show that, after fifteen cycles, the 2.5%TiO2/SiO2 sample still maintains high conversions of dibenzothiophene (99.8%) and 4,6-dimethyldibenzothiophene (99.7%) without deactivation. In addition, the 2.5%TiO2/SiO2 sample treated with TBHP aqueous solution is characterized by the technique of UV-Vis, and the Ti-peroxo (Ti-OOtBu) species, the active intermediate for the ODS of bulky organic sulfides, is successfully captured. Finally, a possible reaction mechanism for the ODS process over the 2.5%TiO2/SiO2 sample is proposed.

Combined Heterogeneous Catalyst Based on Titanium Oxide for Highly Efficient Oxidative Desulfurization of Model Fuels

In this work, new heterogeneous Mo-containing catalysts based on sulfonic titanium dioxide were developed for the oxidation of sulfur-containing model feed. The synergistic effect of molybdenum and sulfonic group modifiers allows for enhancing catalytic activity in dibenzothiophene oxidative transformation, and a strong interaction between support and active component for thus obtained catalysts provides increased stability for leaching. For the selected optimal conditions, the Mo/TiO₂-SO₃H catalyst exhibited 100% DBT conversion for 10 min (1 wt % catalyst, molar ratio of H₂O₂:DBT, 2:1; 80 °C). Complete oxidation of DBT in the presence of the synthesized catalyst is achieved when using a stoichiometric amount of oxidizing agent, which indicates its high selectivity. The enhanced stability for metal leaching was proved in recycling tests, where the catalyst was operated for seven oxidation cycles without regeneration with retainable activity in DBT-containing model feed oxidation with hydrogen peroxide under mild reaction conditions. In 30 min of the reaction (H₂O₂:S = 2:1 (mol), 0.5% catalyst, 5 mL of acetonitrile, 80 °C), it was possible to reduce the content of sulfur compounds in the diesel fraction by 88% (from 5600 to 600 ppm).