New highly luminescent 3D Tb(III)-MOF as selective sensor for antibiotics

Detection methods for antibiotics in wastewater: a review

Antibiotics are widely used as fungicides because of their antibacterial and bactericidal effects. However, it is necessary to control their dosage. If the amount of antbiotics is too much, it cannot be completely metabolized and absorbed, will pollute the environment, and have a great impact on human health. Many antibiotics usually left in factory or aquaculture wastewater pollute the environment, so it is vital to detect the content of antibiotics in wastewater. This article summarizes several common methods of antibiotic detection and pretreatment steps. The detection methods of antibiotics in wastewater mainly include immunoassay, instrumental analysis method, and sensor. Studies have shown that immunoassay can detect deficient concentrations of antibiotics, but it is affected by external factors leading to errors. The detection speed of the instrumental analysis method is fast, but the repeatability is poor, the price is high, and the operation is complicated. The sensor is a method that is currently increasingly studied, including electrochemical sensors, optical sensors, biosensors, photoelectrochemical sensors, and surface plasmon resonance sensors. It has the advantages of fast detection speed, high accuracy, and strong sensitivity. However, the reproducibility and stability of the sensor are poor. At present, there is no method that can comprehensively integrate the advantages. This paper aims to review the enrichment and detection methods of antibiotics in wastewater from 2020 to the present. It also aims to provide some ideas for future research directions in this field.

Management of caffeine in wastewater using MOF and perovskite materials: optimization, kinetics, and adsorption isotherm modelling

Pharmaceuticals and personal care products (PPCPs) have been increasingly used all over the world and they have been reported on water cycle and cause contamination. Among these pharmaceuticals is caffeine (CAF). In this work, CAF removal from aqueous samples by metal-organic framework (UIO-66) and perovskite (La0.7Sr0.3FeO3) was achieved. Detailed studies on the preparation of MOFs and perovskite oxides compounds have been presented. Extensive characterizations such as X-Ray diffraction (XRD), field emission scanning electron microscope (FESEM), Fourier transform infrared spectra (FT-IR), N2 adsorption-desorption isotherms were also carried out to assure proper formation and to better understand the physico-chemical behavior of the synthesized samples before and after adsorption. Batch experiments of CAF adsorption onto both MOFs and perovskite were performed to compare the effectiveness of both materials on the removal competence of the CAF residue at different conditions including the effect of pH, initial concentration, and contact time. It was observed that the adsorption capacity of CAF by MOF increased with increasing acidity. On the other hand, the adsorption capacity of perovskite is stable in pH 4-10. The maximum adsorption capacities of UiO-66 and perovskite toward CAF are high as 62.5 mg g-1 and 35.25 mg g-1, respectively. Equilibrium isotherms were investigated by numerous models: Langmuir, Freundlich, Temkin, Redlich-Peterson, Sips, Langmuir-Freundlich, Toth, Kahn, Baudu, and Fritz Schlunder. Moreover, the kinetics of the CAF@MOF and CAF@Perovskite systems have been studied by five kinetic models (Pseudo-1st -order (PFO), Pseudo-2nd -order (PSO), Mixed 1st, 2nd-order, Intraparticle diffusion and Avrami). The best model described the adsorption of CAF onto both of MOF and perovskite was the mixed 1st, 2nd-order model. The metal-organic framework and perovskite were applied to quickly extract CAF from water samples successfully. The maximum removal percentage obtained for MOF and perovskite was 0.89% and 0.94% respectively within 30 min contact time which suggests that these materials are considered as promising adsorbents for CAF.

Bacterial Cellulose-Based MOF Hybrid as a Sensitive Switch Off-On Luminescent Sensor for the Selective Recognition of l-Histidine

In this study, a stable and luminescent UiO-66-NH2 (UN) and its derivative Cu2+@UN were prepared and utilized successfully as an Off-On luminescent sensing platform for effective, selective, as well as rapid (5 min) detection of l-Histidine (l-His). The UN reveals efficient quenching in the presence of Cu2+ ions through photoinduced electron transition (PET) mechanism as a dynamic quenching process (in the range of 0.01-1 mM) forming Cu2+@UN sensing platform. However, due to the remarkable affinity between l-His and Cu2+, the luminescence of Cu2+@UN is recovered in the presence of l-His indicating Turn-On behavior via a quencher detachment mechanism (QD). A good linear relationship between the l-His concentration and luminescence intensity was observed in the range of 0.01-40 μM (R2 = 0.9978) with a detection limit of 7 nM for l-His sensing. The suggested method was successfully utilized for l-His determination in real samples with good recoveries and satisfying consequences. Moreover, the result indicates that only l-His induces a significant luminescence restoration of Cu2+@UN and that the signal is significantly greater than that of the other amino acids. Also, the portable test paper based on bacterial cellulose (BC) as the Cu2+@UNBC sensing platform was developed to conveniently evaluate the effective detection of l-His.

New Transition Metal Coordination Polymers Derived from 2-(3,5-Dicarboxyphenyl)-6-carboxybenzimidazole as Photocatalysts for Dye and Antibiotic Decomposition

Coordination polymers (CPs) are an assorted class of coordination complexes that are gaining attention for the safe and sustainable removal of organic dyes from wastewater discharge by either adsorption or photocatalytic degradation. Herein, three different coordination polymers with compositions [Ni(HL)(H2O)2·1.9H2O] (1), [Mn3(HL)(L)(μ3-OH)(H2O)(phen)2·2H2O] (2), and [Cd(HL)4(H2O)]·H2O (3) (H3L = 2-(3,5-dicarboxyphenyl)-6-carboxybenzimidazole; phen = 1,10-phenanthroline) have been synthesized and characterized spectroscopically and by single crystal X-ray diffraction. Single crystal X-ray diffraction results indicated that 1 forms a 2D layer-like framework, while 2 exhibits a 3-connected net with the Schläfli symbol of (44.6), and 3 displays a 3D supramolecular network in which two adjacent 2D layers are held by π···π interactions. All three compounds have been used as photocatalysts to catalyze the photodegradation of antibiotic dinitrozole (DTZ) and rhodamine B (RhB). The photocatalytic results suggested that the Mn-based CP 2 exhibited better photodecomposition of DTZ (91.1%) and RhB (95.0%) than the other two CPs in the time span of 45 min. The observed photocatalytic mechanisms have been addressed using Hirshfeld surface analyses.

Detection and removal technologies for ammonium and antibiotics in agricultural wastewater: Recent advances and prospective

With the extensive development of industrial livestock and poultry production, a considerable part of agricultural wastewater containing tremendous ammonium and antibiotics have been indiscriminately released into the aquatic systems, causing serious harms to ecosystem and human health. In this review, ammonium detection technologies, including spectroscopy and fluorescence methods, and sensors were systematically summarized. Antibiotics analysis methodologies were critically reviewed, including chromatographic methods coupled with mass spectrometry, electrochemical sensors, fluorescence sensors, and biosensors. Current progress in remediation methods for ammonium removal were discussed and analyzed, including chemical precipitation, breakpoint chlorination, air stripping, reverse osmosis, adsorption, advanced oxidation processes (AOPs), and biological methods. Antibiotics removal approaches were comprehensively reviewed, including physical, AOPs, and biological processes. Furthermore, the simultaneous removal strategies for ammonium and antibiotics were reviewed and discussed, including physical adsorption processes, AOPs, biological processes. Finally, research gaps and the future perspectives were discussed. Through conducting comprehensive review, future research priorities include: (1) to improve the stabilities and adaptabilities of detection and analysis techniques for ammonium and antibiotics, (2) to develop innovative, efficient, and low cost approaches for simultaneous removal of ammonium and antibiotics, and (3) to explore the underlying mechanisms that governs the simultaneous removal of ammonium and antibiotics. This review could facilitate the evolution of innovative and efficient technologies for ammonium and antibiotics treatment in agricultural wastewater.

Recent Advances of Silver-Based Coordination Polymers on Antibacterial Applications

With the continuous evolution of bacteria and the constant use of traditional antibiotics, the emergence of drug-resistant bacteria and super viruses has attracted worldwide attention. Antimicrobial therapy has become the most popular and important research field at present. Coordination Polymer (CP) and/or metal-organic framework (MOF) platforms have the advantages of a high biocompatibility, biodegradability, and non-toxicity, have a great antibacterial potential and have been widely used in antibacterial treatment. This paper reviewed the mechanism and antibacterial effect of three typical MOFs (pure Ag-MOFs, hybrid Ag-MOFs, and Ag-containing-polymer @MOFs) in silver-based coordination polymers. At the same time, the existing shortcomings and future views are briefly discussed. The study on the antibacterial efficacy and mechanism of Ag-MOFs can provide a better basis for its clinical application and, meanwhile, open up a novel strategy for the preparation of more advanced Ag-contained materials with antibacterial characteristics.

Recent advances of the core-shell MOFs in tumour therapy

Coordination chemistry has always been vital to explore the material prominence of metal-organic systems. The metal-organic chemistry plays a fundamental role in decisive structural features, which are accountable for tuning the properties of materials. Tumour therapy has become an important research field of medical treatment in the world. Metal-organic frameworks (MOFs) have attracted extensive interest in medical science research due to their large effective surface area, clear pore network, and critical catalytic performance. Compared with traditional MOF materials, MOF materials with core-shell structures have a higher loading rate and better stability, which can overcome a single function. They have been successfully used in tumour medical research and have excellent prospects for diagnosing and treating various tumours. The current review article thoroughly describes the various synthetic approaches for engineering core-shell MOF materials, the structural types, and the potential functional applications. We also discussed core-shell MOF materials for the various treatment of tumours, such as tumour chemotherapy, tumour phototherapy and tumour microenvironment anti-hypoxia therapy. In this paper, the synthesized procedures of core-shell MOFs and their applications for tumour treatment have been discussed, and their future research has prospected. The current improved strategies, challenges, and prospects are also presented because of the metal-organic chemistry governing the structural modification of core-shell MOFs for tumour therapy applications. Therefore, the present review article opens a new door for medicinal chemists to tune the structural features of the core-shell MOF materials to modulate tumour therapy with simple, low-cost materials for better human lives.

Recent advances in Ti-based MOFs in biomedical applications

Currently, metal-organic frameworks (MOFs), basically inorganic-organic hybrid materials, have gained tremendous attention due to their vast applications. MOFs have shown enormous applications in almost every research field. However, the area of designing MOF materials for their biological applications is still an emerging field that needs attention. Titanium-based metal-organic framework (Ti-MOF) materials are used in many research areas due to their structural advantages, such as small particle size and large effective surface area. On the other hand, they have also shown unique advantages such as good biocompatibility, excellent catalytic oxidation and photocatalytic properties and ease of functionalization. This study reviews the recent research progress on Ti-MOFs in therapeutic areas such as antibacterial, oncology, anti-inflammation, and bone injury, which will provide new directions for further research in this biomedical field. Therefore, this article will help scientists working in the particular field to enhance their understanding of Ti-based MOFs for functional biomedical applications.

Ultrasensitive fluorescence detection of norfloxacin in aqueous medium employing a 2D Zn(ii)-based coordination polymer

A 2D fluorescent coordination polymer, {[Zn(L)0.5(mip)] 1.75H2O}n (1), was successfully assembled. 1 was developed as an ultrasensitive fluorescent probe for the sensing of norfloxacin (NOR) in water.

Proton-conducting metal–organic frameworks with linkers containing anthracenyl and sulfonate groups

Co(dia)1.5(Hsip)(H2O)·H2O (1) and Zn2(μ-OH)(dia)2(sip)·2H2O (2) were prepared from the same set of ligand precursors. They exhibited bnn and dia topologies, respectively. Factors that contributed to the higher proton conductivity of 1 were presented.

Recent advances on bimetallic metal-organic frameworks (BMOFs): Syntheses, applications and challenges

Bimetallic metal-organic frameworks (MOFs) possess two different metal ions as nodes in their molecular frameworks. They are prepared by either using one-pot syntheses wherein different metals are mixed with suitable...

A new magnetic adsorbent of eggshell-zeolitic imidazolate framework for highly efficient removal of norfloxacin

Many effluents contain various antibiotics commonly, where the simultaneous removal of them is a big challenge. In this study, the magnetic biocomposite (eggshell-zeolitic imidazolate framework) was designed and synthesized by green and facile method. Zeolitic imidazolate framework-8 (ZIF-8) particles were stabilized on the surface of magnetic eggshell (Fe₃O₄-ES), generating a new Fe₃O₄-ES/ZIF-8 adsorbent, which was also fully characterized using FTIR, XRD, SEM and BET techniques. Thereafter, norfloxacin (NOR) adsorption processes were investigated through different influencing factors (dosage, concentration, pH and temperature). The Langmuir adsorption isotherm could confirm a maximum removal efficiency of 80.13% for NOR. Kinetic studies illustrated that the pseudo-first-order model was in line with the experimental data of the simultaneous removal of NOR. Moreover, the magnetic nature of the adsorbent caused an easy separation from the aqueous solution.

Theoretical evaluation of the performance of IRMOFs and M-MOF-74 in the formation of 5-fluorouracil@MOF

Drug delivery systems are a viable resource to be used in medical treatments that tend to be very aggressive to patients, increasing the bioavailability. In this context, porous structures such as MOFs emerge as promising for this type of application, in which a specific drug is adsorbed onto the structure for further release. MOFs such as IRMOFs and M-MOF-74 are investigated in many applications, including use as a drug carrier. In this work, the Monte Carlo grand canonical simulation was used for obtaining insights on the behaviour of 5-fluorouracil adsorption on IRMOF-1, IRMOF-8, IRMOF-10, Mg-MOF74, Fe-MOF74, Cu-MOF74 and Zn-MOF74. We have evaluated the influence of the adsorption of changing organic and inorganic units, which resulted in different chemical environments. It was seen that the drug interacts more efficiently with M-MOF-74, where the metallic centre plays an important role. For IRMOFs, a larger pore volume increases the amount of adsorbed molecules. This effect is mainly due to the contribution of the efficient interaction between 5-fluorouracil molecules.

Drug delivery systems are a viable resource to be used in medical treatments that tend to be very aggressive to patients, increasing the bioavailability.

Recent advances in Cu(II)/Cu(I)-MOFs based nano-platforms for developing new nano-medicines

With increasing world population, life-span of humans and spread of viruses, myriad of diseases in human beings are becoming more and more common. Because of the interesting chemical and framework versatility and porosity of metal organic frameworks (MOFs) they find application in varied areas viz. catalysis, sensing, metal ion/gas storage, chemical separation, drug delivery, bio-imaging. This subclass of coordination polymers having interesting three-dimensional framework exhibits inordinate potential and hence may find application in treatment and cure of cancer, diabetes Alzheimer's and other diseases. The presented review focuses on the diverse mechanism of action, unique biological activity and advantages of copper-based metal organic framework (MOF) nanomaterials in medicine. Also, different methods used in the treatment of cancer and other diseases have been presented and the applications as well as efficacy of copper MOFs have been reviewed and discussed. Eventually, the current-status and potential of copper based MOFs in the field of anti-inflammatory, anti-bacterial and anti-cancer therapy as well as further investigations going on for this class of MOF-based multifunctional nanostructures in for developing new nano-medicines have been presented.

Series of highly stable Cd(ii)-based MOFs as sensitive and selective sensors for detection of nitrofuran antibiotic

The oxygen atom of the MOF ether-bridging group acts as a Lewis base site, improving the connection and allowing the detection of 10 antibiotics through the fluorescence quenching effect.

Two Co(ii)-based coordination polymers as multi-responsive luminescent sensors for the detection of levofloxacin, benzaldehyde and Fe3+ ions in water media

Two CPs display excellent sensitivity, selectivity and low limits of detection for detection of LEV, BZH and Fe3+ ions.

Biomedical applications of metal–organic framework (MOF)-based nano-enzymes

In the present review, the types and activities of nanometer-sized enzymes are summarized, with recent progress of nanometer-sized enzymes in the field of biomedical detection.

New Cd(ii) coordination polymers bearing Y-shaped tricarboxylate ligands as photocatalysts for dye degradation

Two Cd(ii) coordination polymers derived from a Y-shaped tricarboxylate ligand were synthesized and their photocatalytic properties against decomposition of methylene blue were investigated experimentally and computationally.