Real-time Neural Inverse Optimal Control for Low-Voltage Rid-Through enhancement of Double Fed Induction Generator based Wind Turbines

Inverse Optimal Control Using Metaheuristics of Hydropower Plant Model via Forecasting Based on the Feature Engineering

Optimal operation of hydropower plants (HP) is a crucial task for the control of several variables involved in the power generation process, including hydraulic level and power generation rate. In general, there are three main problems that an optimal operation approach must address: (i) maintaining a hydraulic head level which satisfies the energy demand at a given time, (ii) regulating operation to match with certain established conditions, even in the presence of system’s parametric variations, and (iii) managing external disturbances at the system’s input. To address these problems, in this paper we propose an approach for optimal hydraulic level tracking based on an Inverse Optimal Controller (IOC), devised with the purpose of regulating power generation rates on a specific HP infrastructure. The Closed–Loop System (CLS) has been simulated using data collected from the HP through a whole year of operation as a tracking reference. Furthermore, to combat parametric variations, an accumulative action is incorporated into the control scheme. In addition, a Recurrent Neural Network (RNN) based on Feature Engineering (FE) techniques has been implemented to aid the system in the prediction and management of external perturbations. Besides, a landslide is simulated, causing the system’s response to show a deviation in reference tracking, which is corrected through the control action. Afterward, the RNN is including of the aforementioned system, where the trajectories tracking deviation is not perceptible, at the hand of, a better response with respect to use a single scheme. The results show the robustness of the proposed control scheme despite climatic variations and landslides in the reservoir operation process. This proposed combined scheme shows good performance in presence of parametric variations and external perturbations.

Power system stability enhancement by damping and control of Sub-synchronous torsional oscillations using Whale optimization algorithm based Type-2 wind turbines

This paper is aimed to demonstrate the merits of a metaheuristic swarm-based optimization technique, WOA (Whale optimization algorithm), in alleviating the low-frequency torsional oscillations called SSR (Sub-synchronous resonance). The demonstration has been performed using the modified IEEE FBM (IEEE first benchmark model) aggregated with Type-2 WPP (Wind power plant). The Plant is further interlinked to the grid with series compensated lines. Use of WOA for the optimal tuning of the controller suggested in the literature to control one of the degrees of freedom, i.e., Pitch angle and external resistance connected to the rotor, has been demonstrated. The effectiveness of the proposed WOA based controller has been examined using a time-domain approach based on the dynamic response of the different segments of the test system using the Matlab software for the three different cases viz., with Type-2 WPP only, Type-2 WPP with the controller suggested in the literature and with the proposed WOA based controller. The eigenvalues, together with simulation results, reveal the potential of the proposed WOA based controller in damping the low-frequency torsional oscillations using Type-2 wind turbines.