Multi-link endoscopic manipulator robot actuated by shape memory alloys spring actuators controlled by a sliding mode

Snake Robot with Motion Based on Shape Memory Alloy Spring-Shaped Actuators

This study presents the design and evaluation of a prototype snake-like robot that possesses an actuation system based on shape memory alloys (SMAs). The device is constructed based on a modular structure of links connected by two degrees of freedom links utilizing Cardan joints, where each degree of freedom is actuated by an agonist-antagonist mechanism using the SMA spring-shaped actuators to generate motion, which can be easily replaced once they reach a degradation point. The methodology for programming the spring shape into the SMA material is described in this work, as well as the instrumentation required for the monitoring and control of the actuators. A simplified design is presented to describe the way in which the motion is performed and the technical difficulties faced in manufacturing. Based on this information, the way in which the design is adapted to generate a feasible robotic system is described, and a mathematical model for the robot is developed to implement an independent joint controller. The feasibility of the implementation of the SMA actuators regarding the motion of the links is verified for the case of a joint, and the change in the shape of the snake robot is verified through the implementation of a set of tracking references based on a central pattern generator. The generated tracking results confirm the feasibility of the proposed mechanism in terms of performing snake gaits, as well as highlighting some of the drawbacks that should be considered in further studies.

Position Measurements Using Magnetic Sensors for a Shape Memory Alloy Linear Actuator

This article presents the design and implementation of a linear actuator based on NiTi Shape Memory Alloys with temperature and position measurements based on a magnetic sensor array and a set of thermistors. The position instrumentation is contact free to avoid friction perturbations; the position signal conditioning is carried out through the calculation of the response of each magnetic sensor, selecting the closest sensor to ensure accurate results on the full range of movement. Experimental results validate the accuracy of the position sensing with a competitive behaviour.

Visual servoing of continuum robots: Methods, challenges, and prospects

BACKGROUND

Recent advancements in continuum robotics have accentuated developing efficient and stable controllers to handle shape deformation and compliance. The control of continuum robots (CRs) using physical sensors attached to the robot, particularly in confined spaces, is difficult due to their limited accuracy in three-dimensional deflections and challenging localisation. Therefore, using non-contact imaging sensors finds noticeable importance, particularly in medical scenarios. Accordingly, given the need for direct control of the robot tip and notable uncertainties in the kinematics and dynamics of CRs, many papers have focussed on the visual servoing (VS) of CRs in recent years.

METHODS

The significance of this research towards safe human-robot interaction has fuelled our survey on the previous methods, current challenges, and future opportunities.

RESULTS

Beginning with actuation modalities and modelling approaches, the paper investigates VS methods in medical and non-medical scenarios.

CONCLUSIONS

Finally, challenges and prospects of VS for CRs are discussed, followed by concluding remarks.