In-plane Assembly of Distinctive 2D MOFs with Optimum Supercapacitive Performance

Emerging 2D Copper-Based Materials for Energy Storage and Conversion: A Review and Perspective

2D materials have shown great potential as electrode materials that determine the performance of a range of electrochemical energy technologies. Among these, 2D copper-based materials, such as Cu-O, Cu-S, Cu-Se, Cu-N, and Cu-P, have attracted tremendous research interest, because of the combination of remarkable properties, such as low cost, excellent chemical stability, facile fabrication, and significant electrochemical properties. Herein, the recent advances in the emerging 2D copper-based materials are summarized. A brief summary of the crystal structures and synthetic methods is started, and innovative strategies for improving electrochemical performances of 2D copper-based materials are described in detail through defect engineering, heterostructure construction, and surface functionalization. Furthermore, their state-of-the-art applications in electrochemical energy storage including supercapacitors (SCs), alkali (Li, Na, and K)-ion batteries, multivalent metal (Mg and Al)-ion batteries, and hybrid Mg/Li-ion batteries are described. In addition, the electrocatalysis applications of 2D copper-based materials in metal-air batteries, water-splitting, and CO₂ reduction reaction (CO₂ RR) are also discussed. This review also discusses the charge storage mechanisms of 2D copper-based materials by various advanced characterization techniques. The review with a perspective of the current challenges and research outlook of such 2D copper-based materials for high-performance energy storage and conversion applications is concluded.

A dual-control strategy based on electrode material and electrolyte optimization to construct an asymmetric supercapacitor with high energy density

Metal-organic frames (MOFs) are regarded as excellent candidates for supercapacitors that have attracted much attention because of their diversity, adjustability and porosity. However, both poor structural stability in aqueous alkaline electrolytes and the low electrical conductivity of MOF materials constrain their practical implementation in supercapacitors. In this study, bimetallic CoNi-MOF were synthesized to enhance the electrical conductivity and electrochemical activity of nickel-based MOF, as well as the electrochemical performance of the CoNi-MOF in multiple alkaline electrolytes was investigated. The CoNi-MOF/active carbon device, as-fabricated with a 1 M KOH electrolyte, possesses a high energy density of 35 W h kg^-1with a power density of 1450 W kg^-1, exhibiting outstanding cycling stability of 95% over 10,000 cycles. The design of MOF-based electrode materials and the optimization selection of electrolytes pave the way for constructing high-performance supercapacitors.

Atomic/molecular layer deposition of Ni-terephthalate thin films

Atomic/molecular layer deposition (ALD/MLD) is currently strongly emerging as an intriguing route for novel metal-organic thin-film materials. This approach already covers a variety of metal and organic components, and potential applications related to e.g. sustainable energy technologies. Among the 3d metal components, nickel has remained unexplored so far. Here we report a robust and efficient ALD/MLD process for the growth of high-quality nickel terephthalate thin films. The films are deposited from Ni(thd)₂ (thd: 2,2,6,6-tetramethyl-3,5-heptanedionate) and terephthalic acid (1,4-benzenedicarboxylic acid) precursors in the temperature range of 180-280 °C, with appreciably high growth rates up to 2.3 Å per cycle at 200 °C. The films are amorphous but the local structure and chemical state of the films are addressed based on XRR, FTIR and RIXS techniques.

Two-dimensional MOFs: Design & Synthesis and Applications

For the past few years, two-dimensional materials have attracted widespread attention owing to their special properties and potential applications. It is well-known that graphene, transition metal disulfide compounds (TMDC), carbon nitride, transition metal carbonitrides (Mxenes), silene and hexagonal boron nitride are typical two-dimensional materials. Compared with these traditional two-dimensional materials, two-dimensional MOF is favored by numerous researchers because of its unique structure. Based on the unique metal ion and organic ligand coordination of MOF and two-dimensional layered structure, the applications of two-dimensional MOF were getting serious, including catalysis, supercapacitor, gas adsorption/separation, sensors and so on. This review presents a relatively comprehensive summary of the design & synthesis and applications of two-dimensional MOF over the past few years. Furthermore, the opportunities and challenges have been discussed to supply a promising prospect to this field.

Recent progress on pristine two-dimensional metal-organic frameworks as active components in supercapacitors

Two-dimensional (2D) metal-organic frameworks (MOFs) are a new generation of 2D materials that can provide uniform active sites and unique open channels as well as excellent catalytic abilities, interesting magnetic properties, and reasonable electrical conductivities. Thus, these MOFs are uniquely qualified for use in applications in energy-related fields or portable devices because they possess fast charge and discharge ability, high power density, and ultralong cycle life factors. There has been worldwide research interest in 2D conducting MOFs, and numerous techniques and strategies have been developed to synthesize these MOFs and their derivatives. Thus, this is the opportune time to review recent research progress on the development of 2D MOFs as electrodes in supercapacitors. This review covers synthetic design strategies, electrochemical performances, and working mechanisms. We will divide these 2D MOFs into two types on the basis of their conductive aspects: 2D conductive MOFs and 2D layered MOFs (including pillar-layered MOFs and 2D nanosheets). The challenges and perspectives of 2D MOFs are also provided.

Ni(OH)2 derived Ni-MOF supported on carbon nanowalls for supercapacitors

Metal organic frameworks (MOFs) are expected to be promising pseudocapacitve materials because of their potential redox sites and porous structures. Nevertheless, the conductivity inferiority of MOF strongly decreases their structural advantages, therefore resulting in unsatisfying electrochemical performance. Herein, we propose an efficient strategy to enhance conductivity and thus electrochemical properties, in Ni(OH)₂ is electrochemically deposited on carbon nanowalls as the precursor for oriented MOF. The synthesized vertically oriented MOF sheets show an almost triple high capacitance of 677 F g^-1 than MOF powder of 239 F g^-1 at the current density of 2 A g^-1. Correspondingly, an asymmetric supercapacitor is fabricated, which can deliver a maximum energy density of 20.7 Wh kg^-1 and a maximum power density of 23 200 W kg^-1. These promising results indicate that modulating the conductivity of MOF is the key step to pursuit upgrading electrochemical performance.

Metal organic framework derived porous carbon materials excel as an excellent platform for high-performance packaged supercapacitors

Designing and synthesizing new materials with special physical and chemical properties are the key steps to assembling high performance supercapacitors. Metal organic framework (MOF) derived porous carbon materials have drawn great attention in supercapacitors because of their large specific surface area, high chemical/thermal stability and tunable pore structure. Thus, the recent development of porous carbon as an electrode material for supercapacitors is reviewed. The types, design and synthesis strategies of porous carbon are systematically summarized. This review will be divided into three main parts: (1) the design and synthesis of MOF precursors and templates for MOF-derived porous carbon materials; (2) the application of different types of MOF-derived carbon in supercapacitors; and (3) the design of typical structures of porous carbon composites for supercapacitors. Finally, the problems and challenges confronted when using porous carbon are assessed and elaborated, and some suggestions on future research directions are proposed.

B/N-Enriched Semi-Conductive Polymer Film for Micro-Supercapacitors with AC Line-Filtering Performance

Microsupercapacitors (MSCs) have drawn great attention for use as miniaturized electrochemical energy storage devices in portable, wearable, as well as implantable electronics. Many materials have been developed as electrodes for MSCs. However, the thin-film fabrication for most of these materials involves multistep operations, including filtration, spray coating, and sputtering. Most importantly, these methods present challenges for the preparation of thin films at the atomic or molecular scale. Therefore, the understanding of performance of ultrathin-film-based MSCs remains challenge. Herein, a B/N-enriched polymer film is successfully prepared using the photoassisted interfacial approach. The as-synthesized polymer film exhibits typical semiconductive characteristics and can be easily scaled up to a large area of up to tens of square centimeters. This ultrathin polymer film can be directly transferred to silicon wafers to fabricate MSC through laser scribing. The prepared MSC exhibits specific volumetric capacitance as high as 20.9 F cm^-3, corresponding to volumetric energy density of 2.9 mWh cm^-3 (at 0.1 V s^-1). Moreover, the volumetric power density can reach 1461 W cm^-3, surpassing most existing semiconductive polymer film-based MSC devices. In addition, the prepared MSC exhibits typical AC line-filtering ability (-67° at 120 Hz). This study offers a facile interfacial approach to preparing semiconductive polymer films with aromatic moieties for microsized energy storage devices.

The Application of Metal-Organic Frameworks and Their Derivatives for Supercapacitors

Supercapacitors (SCs), one of the most popular types of energy-storage devices, present lots of advantages, such as large power density and fast charge/discharge capability. Being the promising SCs electrode materials, metal-organic frameworks (MOFs) and their derivatives have gained ever-increasing attention due to their large specific surface area, controllable porous structure and rich diversity. Herein, the recent development of MOFs-based materials and their application in SCs as the electrode are reviewed and summarized. The preparation method, the morphology of the materials and the electrical performance of various MOFs and their derivatives (such as carbon, metal oxide/hydroxide and metal sulfide) are briefly discussed. Most of recent works concentrate on Ni-, Co- and Mn-MOFs and their composites/derivatives. Conclusions and our outlook for the researches are also given, which would be a valuable guideline for the rational design of MOFs materials for SCs in the near future.