Highly Controllable and Silicon-Compatible Ferroelectric Photovoltaic Synapses for Neuromorphic Computing

Nanostructure engineering for ferroelectric photovoltaics

Ferroelectric photovoltaics have attracted increasing attention since their discovery in the 1970s, due to their above-bandgap photovoltage and polarized-light-dependent photocurrent. However, their practical applications have been limited by their weak visible light absorption and low photoconductivity. Intrinsic modification of the material, such as bandgap tuning through chemical doping, has proven effective, but usually leads to the degradation of ferroelectricity. Recently, various nanostructures, such as multilayer heterojunctions, nanoparticles, vertically aligned nanocomposites and polar nanoregions, have been developed to enhance photovoltaic performance. These approaches enable the nanoassembly of materials in a lower-dimension manner to optimize the bulk photovoltaic effect whilst effectively preserving or even inducing ferroelectricity. This review highlights the fabrication processes of these emerging ferroelectric nanostructures and evaluates their photovoltaic performance.

Synaptic Characteristics of Atomic Layer-Deposited Ferroelectric Lanthanum-Doped HfO2 (La:HfO2) and TaN-Based Artificial Synapses

Analog synaptic devices have made significant advances based on various electronic materials that can realize the biological synapse properties of neuromorphic computing. Ferroelectric (FE) HfO2-based materials with nonvolatile and low power consumption characteristics are being studied as promising materials for application to analog synaptic devices. The gradual reversal of FE multilevel polarization results in precise changes in the channel conductance and allows analogue synaptic weight updates. However, there have been few studies of FE synaptic devices doped with La, Y, and Gd. Furthermore, an investigation of interface quality is also crucial to enhance the remnant polarization (Pr), synaptic conductance linearity, and reliability characteristics. In this study, we demonstrate improved FE and artificial synaptic characteristics using an atomic layer-deposited (ALD) lanthanum-doped HfO2 (La:HfO2) and TaN electrode in the structure of an FE thin-film transistor (ITO/IGZO/La:HfO2/TaN), where indium-tin oxide (ITO) and indium-gallium-zinc oxide (IGZO) were used as source/drain and channel materials, respectively. Improved Pr and lower surface roughness were achieved by doped HfO2 and ALD TaN thin films. This synaptic transistor shows long-term potentiation and long-term depression with 200 levels of conductance states, high linearity (Ap, 0.97; Ad, 0.86), high Gmax/Gmin (∼6.1), and low cycle-to-cycle variability. In addition, a pattern recognition accuracy higher than 90% was achieved in an artificial neural network simulation.

All-ferroelectric implementation of reservoir computing

Reservoir computing (RC) offers efficient temporal information processing with low training cost. All-ferroelectric implementation of RC is appealing because it can fully exploit the merits of ferroelectric memristors (e.g., good controllability); however, this has been undemonstrated due to the challenge of developing ferroelectric memristors with distinctly different switching characteristics specific to the reservoir and readout network. Here, we experimentally demonstrate an all-ferroelectric RC system whose reservoir and readout network are implemented with volatile and nonvolatile ferroelectric diodes (FDs), respectively. The volatile and nonvolatile FDs are derived from the same Pt/BiFeO₃/SrRuO₃ structure via the manipulation of an imprint field (E_imp). It is shown that the volatile FD with E_imp exhibits short-term memory and nonlinearity while the nonvolatile FD with negligible E_imp displays long-term potentiation/depression, fulfilling the functional requirements of the reservoir and readout network, respectively. Hence, the all-ferroelectric RC system is competent for handling various temporal tasks. In particular, it achieves an ultralow normalized root mean square error of 0.017 in the Hénon map time-series prediction. Besides, both the volatile and nonvolatile FDs demonstrate long-term stability in ambient air, high endurance, and low power consumption, promising the all-ferroelectric RC system as a reliable and low-power neuromorphic hardware for temporal information processing.

Short-term memory capacity analysis of Lu3Fe4Co0.5Si0.5O12-based spin cluster glass towards reservoir computing

Reservoir computing is a brain heuristic computing paradigm that can complete training at a high speed. The learning performance of a reservoir computing system relies on its nonlinearity and short-term memory ability. As physical implementation, spintronic reservoir computing has attracted considerable attention because of its low power consumption and small size. However, few studies have focused on developing the short-term memory ability of the material itself in spintronics reservoir computing. Among various magnetic materials, spin glass is known to exhibit slow magnetic relaxation that has the potential to offer the short-term memory capability. In this research, we have quantitatively investigated the short-term memory capability of spin cluster glass based on the prevalent benchmark. The results reveal that the magnetization relaxation of Co, Si-substituted Lu3Fe5O12 with spin glass behavior can provide higher short-term memory capacity than ferrimagnetic material without substitution. Therefore, materials with spin glass behavior can be considered as potential candidates for constructing next-generation spintronic reservoir computing with better performance.

A Ferroelectric Memristor-Based Transient Chaotic Neural Network for Solving Combinatorial Optimization Problems

A transient chaotic neural network (TCNN) is particularly useful for solving combinatorial optimization problems, and its hardware implementation based on memristors has attracted great attention recently. Although previously used filamentary memristors could provide the desired nonlinearity for implementing the annealing function of a TCNN, the controllability of filamentary switching still remains relatively poor, thus limiting the performance of a memristor-based TCNN. Here, we propose to use ferroelectric memristor to implement the annealing function of a TCNN. In the ferroelectric memristor, the conductance can be tuned by switching the lattice non-centrosymmetry-induced polarization, which is a nonlinear switching mechanism with high controllability. We first establish a ferroelectric memristor model based on a ferroelectric tunnel junction (FTJ), which exhibits the polarization-modulated tunnel conductance and the nucleation-limited-switching (NLS) behavior. Then, the conductance of the ferroelectric memristor is used as the self-feedback connection weight that can be dynamically adjusted. Based on this, a ferroelectric memristor-based transient chaotic neural network (FM-TCNN) is further constructed and applied to solve the traveling salesman problem (TSP). In 1000 runs for 10-city TSP, the FM-TCNN achieves a shorter average path distance, a 32.8% faster convergence speed, and a 2.44% higher global optimal rate than the TCNN.

Ferroelectric photosensor network: an advanced hardware solution to real-time machine vision

Nowadays the development of machine vision is oriented toward real-time applications such as autonomous driving. This demands a hardware solution with low latency, high energy efficiency, and good reliability. Here, we demonstrate a robust and self-powered in-sensor computing paradigm with a ferroelectric photosensor network (FE-PS-NET). The FE-PS-NET, constituted by ferroelectric photosensors (FE-PSs) with tunable photoresponsivities, is capable of simultaneously capturing and processing images. In each FE-PS, self-powered photovoltaic responses, modulated by remanent polarization of an epitaxial ferroelectric Pb(Zr0.2Ti0.8)O3 layer, show not only multiple nonvolatile levels but also sign reversibility, enabling the representation of a signed weight in a single device and hence reducing the hardware overhead for network construction. With multiple FE-PSs wired together, the FE-PS-NET acts on its own as an artificial neural network. In situ multiply-accumulate operation between an input image and a stored photoresponsivity matrix is demonstrated in the FE-PS-NET. Moreover, the FE-PS-NET is faultlessly competent for real-time image processing functionalities, including binary classification between 'X' and 'T' patterns with 100% accuracy and edge detection for an arrow sign with an F-Measure of 1 (under 365 nm ultraviolet light). This study highlights the great potential of ferroelectric photovoltaics as the hardware basis of real-time machine vision.

Analog Synaptic Transistor with Al-Doped HfO2 Ferroelectric Thin Film

Neuromorphic computing has garnered significant attention because it can overcome the limitations of the current von-Neumann computing system. Analog synaptic devices are essential for realizing hardware-based artificial neuromorphic devices; however, only a few systematic studies in terms of both synaptic materials and device structures have been conducted so far, and thus, further research is required in this direction. In this study, we demonstrate the synaptic characteristics of a ferroelectric material-based thin-film transistor (FeTFT) that uses partial switching of ferroelectric polarization to implement analog conductance modulation. For a ferroelectric material, an aluminum-doped hafnium oxide (Al-doped HfO2) thin film was prepared by atomic layer deposition. As an analog synaptic device, our FeTFT successfully emulated short-term plasticity and long-term plasticity characteristics, such as paired-pulse facilitation and spike timing-dependent plasticity. In addition, we obtained potentiation/depression weight updates with high linearity, an on/off ratio, and low cycle-to-cycle variation by adjusting the amplitude and number of input pulses. In the simulation trained with optimized potentiation/depression conditions, we achieved a pattern recognition accuracy of approximately 90% for the Modified National Institute of Standard and Technology (MNIST) handwritten data set. Our results indicated that ferroelectric transistors can be used as an alternative artificial synapse.

Effect of polarization rotation on the optical and photovoltaic properties of BiFeO3thin films

Visible-light-active ferroelectric materials are gaining increasing attention due to the unique ferroelectric photovoltaic effect. To boost the light harvesting capability, vast research is devoted to band gap engineering by chemical substitutions, regardless of the side effect on ferroelectric polarization. Here, we focus on how polar order affects the optical and photovoltaic properties. Using BiFeO₃as the model system, we induce the polarization rotation by A-site La substitution, which results in continuous reduction of optical anisotropy of the samples, as revealed by the concerted optical characterizations. This further causes the decrease of angular dependence of ferroelectric photovoltaic effect on the light polarization. The results demonstrate the inner connection of the ferroelectric polarization and optical anisotropy via the lattice degree of freedom.