Angular-multiplexed multichannel optical vortex arrays generators based on geometric metasurface

Highly efficient vortex generation at the nanoscale

Control of the angular momentum of light at the nanoscale is critical for many applications of subwavelength photonics, such as high-capacity optical communications devices, super-resolution imaging and optical trapping. However, conventional approaches to generate optical vortices suffer from either low efficiency or relatively large device footprints. Here we show a new strategy for vortex generation at the nanoscale that surpasses single-pixel phase control. We reveal that interaction between neighbouring nanopillars of a meta-quadrumer can tailor both the intensity and phase of the transmitted light. Consequently, a subwavelength nanopillar quadrumer is sufficient to cover a 2lπ phase change, thus efficiently converting incident light into high-purity optical vortices with different topological charges l. Benefiting from the nanoscale footprint of the meta-quadrumers, we demonstrate high-density vortex beam arrays and high-dimensional information encryption, bringing a new degree of freedom to many designs of meta-devices.

Wavelength-polarization-multiplexed multichannel perfect vortex array generator based on dielectric metasurface

The multi-channel perfect vortex (PV) array based on metasurface has important applications in optical communication, particle manipulation, quantum optics, and other fields due to its ultra-thin structure and excellent wavefront control ability. However, it is very challenging to utilize a single metasurface to simultaneously achieve independent channel PV arrays at different wavelengths with low crosstalk and low structural complexity. Here, we propose and design a single rectangular structured metasurface based on TiO2, achieving a multi-channel PV beam array with dual-wavelength and dual-polarization multiplexing. Simulation and experimental results show that when two orthogonal linearly polarized beams with wavelengths of 532 nm and 633 nm are incident on the metasurface, clear PV arrays with corresponding topological charge arrangements can be obtained in different diffraction regions of the same observation plane. The metasurface proposed in this article can enhance the channel capacity of a PV beam array through wavelength-polarization-multiplexing, thus having important application potential in spatial information transmission, high-dimensional information storage, and secure information encryption.

Spin-Selective Angular Dispersion Control in Dielectric Metasurfaces for Multichannel Meta-Holographic Displays

Angle-dependent next-generation displays have potential applications in 3D stereoscopic and head-mounted displays, image combiners, and encryption for augmented reality (AR) and security. Metasurfaces enable such exceptional functionalities with groundbreaking achievements in efficient displays over the past decades. However, limitations in angular dispersion control make them unfit for numerous nanophotonic applications. Here, we propose a spin-selective angle-dependent all-dielectric metasurface with a unique design strategy to manifest distinct phase information at different incident angles of light. As a proof of concept, the phase masks of two images are encoded into the metasurface and projected at the desired focal plane under different angles of left circularly polarized (LCP) light. Specifically, the proposed multifunctional metasurface generates two distinct holographic images under LCP illumination at angles of +35 and -35°. The presented holographic displays may provide a feasible route toward multifunctional meta-devices for potential AR displays, encrypted imaging, and information storage applications.

GaN vortex metasurface for interference and broadband characteristics

We experimentally demonstrate a highly efficient metasurface-based optical vortex beam (OVB) composed of high-aspect-ratio gallium nitride (GaN) meta-structures with an exceptional simulated absolute polarization conversion efficiency (APCE) of up to 98%. A flower-like interference pattern emerges at the converging distance of the device with the helicity switching in spiral and dislocation interference patterns beyond this point, as confirmed through meticulous Mach-Zehnder interferometer analysis. The device also performs broadband capabilities across visible wavelengths. Experimentally demonstrated, the annular shape adeptly expands its diameter with increasing incident wavelengths. This phenomenon is rooted in the fascinating anomalous refractive and reflective characteristics inherent to subwavelength-period metasurfaces.

Arbitrary-Order and Multichannel Optical Vortices with Simultaneous Amplitude and Phase Modulation on Plasmonic Metasurfaces

The highly localized and uneven spatial distribution of the subwavelength light field in metal metasurfaces provides a promising means for the generation of optical vortices (OVs) with arbitrary topological charges. In this paper, a simple and reliable way for generating multichannel OVs on gold nanoporous metasurfaces is reported. The instantaneous field of arbitrary-order OVs can be regulated and concentrated on the same focal surface by adapting photonic spin-orbit interaction (SOI) and geometric phase. The focal ring energy distribution of OVs along the conical propagation path is accurately calculated, and the double phase of units induced by spin rotation is confirmed. Based on the parameter optimization of the nanohole arrangement, the simultaneous amplitude and phase modulation of multichannel OVs has been realized. Furthermore, the average multichannel signal-to-noise ratio exceeds 15 dB, which meets the requirements of high resolution and low crosstalk. Our study obtains broadband and efficient OVs, which can contribute to improving the capacity storage and security of optical information and possess great application prospects in beam shaping, optical tweezers, and communication coding.

Highly Efficient Perfect Vortex Beams Generation Based on All-Dielectric Metasurface for Ultraviolet Light

Featuring shorter wavelengths and high photon energy, ultraviolet (UV) light enables many exciting applications including photolithography, sensing, high-resolution imaging, and optical communication. The conventional methods of UV light manipulation through bulky optical components limit their integration in fast-growing on-chip systems. The advent of metasurfaces promised unprecedented control of electromagnetic waves from microwaves to visible spectrums. However, the availability of suitable and lossless dielectric material for the UV domain hindered the realization of highly efficient UV metasurfaces. Here, a bandgap-engineered silicon nitride (Si3N4) material is used as a best-suited candidate for all-dielectric highly efficient UV metasurfaces. To demonstrate the wavefront manipulation capability of the Si3N4 for the UV spectrum, we design and numerically simulate multiple all-dielectric metasurfaces for the perfect vortex beam generation by combing multiple phase profiles into a single device. For different numerical apertures (NA =0.3 and 0.7), it is concluded that the diffracted light from the metasurfaces with different topological charges results in an annular intensity profile with the same ring radius. It is believed that the presented Si3N4 materials and proposed design methodology for PV beam-generating metasurfaces will be applicable in various integrated optical and nanophotonic applications such as information processing, high-resolution spectroscopy, and on-chip optical communication.

Multiplexed vortex state array toward high-dimensional data multicasting

Optical vortex array has drawn widespread attention since the boom of special applications such as molecular selecting and optical communication. Here, we propose an integrated phase-only scheme to generate multiple multiplexed vortex beams simultaneously, constituting a multiplexed vortex state array, where the spatial position, as well as the corresponding orbital angular momentum (OAM) spectrum, can be manipulated flexibly as desired. Proof-of-concept experiments are carried out and show a few different multiplexed vortex state arrays that fit well with the simulation. Moreover, regarding the array as a data-carrier, a one-to-many multicasting link through multi-state OAM shift keying, a high-dimensional data coding, is also available in free space. In the experiment, four various OAM states are employed and achieve four bits binary symbols, and finally distribute three different images to three separate receivers independently from the same transmitter, showing great potential in the future high-dimensional optical networks.

Computing metasurfaces enabled chiral edge image sensing

Computing metasurfaces have shown the extraordinary ability to precisely perform optical analog operations to the input light wave, and therefore exhibit greater potentials toward sensing applications. Here, we propose a unique application of computing metasurface for chiral edge sensing by incorporating a weak-value amplification technique. The computing metasurface performs the spatial differentiation operations of phase objects and extracts the edge-enhanced images, because the phase gradient generally occurs at the edge. The chirality-induced polarization rotation acts as the preselection state and the spatial differentiation operations in the metasurface provide weak coupling. The amplified pointer shift related to the tiny polarization rotation will eventually lead to an asymmetric edge-enhanced image. Owing to the high sensitivity of the weak-value amplification, we experimentally demonstrate a high-contrast recognition of chirality by edge detection, which may have potential applications in real-time measurement and separation of chiral enantiomers.

•

Computing metasurfaces perform the spatial differentiation operations of phase object

•

Weak-value amplification technique has been proposed for the chiral sensing

•

The chiral edge image sensing has been demonstrated

Pancharatnam-Berry phase reversal via opposite-chirality-coexisted superstructures

Recently discovered reflective Pancharatnam-Berry phase (PB phase) from chiral anisotropic media (e.g., cholesteric liquid crystal, CLC) has aroused great interest in the emerging frontier of planar optics. However, the single chirality of common CLCs results in the intrinsic limitation of the same spin-selective PB phase manipulation, which means the reversal of the input spin cannot realize the conjugated PB phase. In this work, an innovative scheme based on opposite-chirality-coexisted superstructures is proposed to simultaneously modulate orthogonal circular polarization and get PB phase reversal. Through refilling CLC into a washed-out polymer network with opposite chirality and delicate photo-patterned structures, reflective optical vortex (OV) with opposite topological charges and vector beams with conjugated spiral PB phases are efficiently generated depending on the incident polarization. Furthermore, OV holograms are encoded to reconstruct polarization-selective OV arrays, indicating the strong capability of such opposite-chirality-coexisted anisotropic media. This work provides a new compact platform for planar optics, and sheds light on the architectures and functionalities of chiral superstructures.

Circular dichroic metasurface based on a "double L" structure

Based on the theory of circular polarization dichroism in electromagnetic fields, this paper studies the circular dichroism (CD) characteristics of metasurfaces. Using a stable silicon material, an innovative "double L-shaped" composite structure formed by two L crosses is proposed to improve CD. Under a wide spectrum with wavelengths of 1000-1500 nm, the left circularly polarized (LCP) and right circularly polarized (RCP) lights pass through the structure, and we study the influence of different structural parameters on the CD, in order to obtain the best structural parameters. These realize the cross polarization of left-right circularly polarized light. In addition, at the wavelength of 1302.63 nm, the LCP light illuminates the structure, which realizes the cross polarization of LCP light; that is, the structure realizes the function of a half-wave plate. The RCP light incident structure realizes the function of a filter. It has great application prospects in biological detection, half-wave plates, filters, and other fields.

Compact and Scalable Large Vortex Array Generation Using Azocarbazole Polymer and Digital Hologram Printing Technique

An integrated device capable of generating large number of multiplexed optical vortex beams with arbitrary topological charge is considered as one of the crucial requirement for driving information photonics forward. Here we report a simple method for simultaneous generation of 100 multiplexed optical vortex beams from a polymer film of size 1 mm² and thickness of 30 μm. This is achieved through a combination of computer-generated holography, digital hologram printing and photoisomeric polymers. When the fabricated sample is illuminated with a collimated laser beam, a pre-determined vortex array with arbitrary topological charge is emitted. The polymer film easy to synthesize and exhibits a diffraction efficiency of 30% with a retention period longer than 50 days.

Bidirectional nanoprinting based on bilayer metasurfaces

Bidirectional nanoprinting, has received significant attention in image display and on-chip integration, due to its superior advantages. By manipulating the amplitude in a narrow- or broad-band wavelength range of forward and backward incident light, different spatially varied intensities or color distributions can be generated on the structure plane. However, the current scheme cannot fully decouple the bidirectional light intensity due to the limitation of design degree of freedom, and it would hinder the development of asymmetric photonic devices. In this paper, we propose and demonstrate bidirectional nanoprinting based on an all-dielectric bilayer metasurface, which can independently control the intensity of forward and backward incident light, resulting in two different continuous grayscale meta-image displaying in the visible region. This asymmetric but still bidirectional optical response is introduced by stacking two layers of nanostructures with different functionality in space, in which the first- and second-layer nanostructures act as a half-wave plate and a polarizer, respectively. Interestingly, these bidirectional nanoprinting metasurfaces have flexible working modes and may bring great convenience for practical applications. Specifically, two different meta-images generated by a bidirectional nanoprinting metasurface can be displayed not only on two sides of the metasurface (working mode in transmission or reflection), but on the same side due to the forward transmitted light and backward reflected light also having asymmetric optical properties. Similar phenomena also exist for forward reflected light and backward transmitted light. Our work extremely expands the design freedom for metasurface devices and may play a significant role in the field of optical display, information multiplexing, etc.

Converting an array of edge dislocations into a multi-vortex beam

We theoretically show how, using a cylindrical lens, a Gaussian beam with a finite number of parallel zero-intensity lines (edge dislocations) is transformed into a vortex beam that carries orbital angular momentum (OAM) and topological charge (TC). Remarkably, while the original beam is assumed to carry a non-zero OAM and have no TC, the latter is shown to appear during free-space propagation. Considering two parallel center-symmetric zero-intensity lines located as an example, we look into the dynamics of generating two intensity nulls at the double focal length: with increasing distance between the vertical zero-intensity lines, two optical vortices are first generated on the horizontal axis before converging at the origin and then diverging along the vertical axis. Irrespective of the between-line distance, such an optical vortex has ${\rm TC} = - {2}$ at any distance from the optical axis, except for the original plane. With changing distance between the zero-intensity lines, the OAM that the beam carries is changing, taking positive and negative values, or a zero value at a certain between-line distance. We also show that if the number of zero-intensity lines is infinite, a vortex beam with finite OAM and infinite TC is generated.