Bidirectional electroactive microbial biofilms and the role of biogenic sulfur in charge storage and release

Hydrogen production in microbial electrolysis cells with biocathodes

Electroautotrophic microbes at biocathodes in microbial electrolysis cells (MECs) can catalyze the hydrogen evolution reaction with low energy demand, facilitating long-term stable performance through specific and renewable biocatalysts. However, MECs have not yet reached commercialization due to a lack of understanding of the optimal microbial strains and reactor configurations for achieving high performance. Here, we critically analyze the criteria for the inocula selection, with a focus on the effect of hydrogenase activity and microbe-electrode interactions. We also evaluate the impact of the reactor design and key parameters, such as membrane type, composition, and electrode surface area on internal resistance, mass transport, and pH imbalances within MECs. This analysis paves the way for advancements that could propel biocathode-assisted MECs toward scalable hydrogen gas production.

Performance of a combined electrotrophic and electrogenic biofilm operated under long-term, continuous cycling

OBJECTIVES

Evaluate electrochemically active biofilms as high energy density rechargeable microbial batteries toward providing persistent power in applications where traditional battery technology is limiting (, remote monitoring applications).

RESULTS

Here we demonstrated that an electrochemically active biofilm was able to store and release electrical charge for alternating charge/discharge cycles of up to 24 h periodicity (50% duty cycle) with no significant decrease in average current density (0.16 ± 0.04 A/m2) for over 600 days. However, operation at 24 h periodicity for > 50 days resulted in a sharp decrease in the current to nearly zero. This current crash was recoverable by decreasing the periodicity. Overall, the coulombic efficiency remained near unity within experimental error (102 ± 3%) for all of the tested cycling periods. Electrochemical characterization here suggests that electron transfer occurs through multiple routes, likely a mixture of direct and mediated mechanisms.

CONCLUSIONS

These results indicate that bidirectional electrogenic/electrotrophic biofilms are capable of efficient charge storage/release over a wide range of cycling frequency and may eventually enable development of sustainable, high energy density rechargeable batteries.

Alternating polarity as a novel strategy for building synthetic microbial communities capable of robust Electro-Methanogenesis

Electro-methanogenic microbial communities can produce biogas with high efficiency and have attracted extensive research interest. In this study an alternating polarity strategy was developed to build electro-methanogenic communities. In two-chamber bioelectrochemical systems amended with activated carbon, the electrode potential was alternated between +0.8 V and -0.4 V vs. standard hydrogen electrode every three days. Cumulative biogas production under alternating polarity increased from 45 L/L/kg-activated carbon after start-up to 125 L/L/kg after the 4th enrichment, significantly higher than that under intermittent cathode (-0.4 V/open circuit), continuous cathode (-0.4 V), and open circuit. The communities assembled under alternating polarity were electroactive and structurally different from those assembled under other conditions. One Methanobacterium population and two Geobacter populations were consistently abundant and active in the communities. Their 16S rRNA was up-regulated by electrode potentials. Bayesian networks inferred close associations between these populations. Overall, electro-methanogenic communities have been successfully assembled with alternating polarity.

Carbon source priority and availability limit bidirectional electron transfer in freshwater mixed culture electrochemically active bacterial biofilms

This study investigated, if a mixed electroactive bacterial (EAB) culture cultivated heterotrophically at a positive applied potential could be adapted from oxidative to reductive or bidirectional extracellular electron transfer (EET). To this end, a periodic potential reversal regime between - 0.5 and 0.2 V vs. Ag/AgCl was applied. This yielded biofilm detachment and mediated electroautotrophic EET in combination with carbonate, i.e., dissolved CO2, as the sole carbon source, whereby the emerged mixed culture (S1) contained previously unknown EAB. Using acetate (S2) as well as a mixture of acetate and carbonate (S3) as the main carbon sources yielded primarily alternating electrogenic organoheterotropic metabolism with the higher maximum oxidation current densities recorded for mixed carbon media, exceeding on average 1 mA cm-2. More frequent periodic polarization reversal resulted in the increase of maximum oxidative current densities by about 50% for S2-BES and 80% for S3-BES, in comparison to half-batch polarization. The EAB mixed cultures developed accordingly, with S1 represented by mostly aerobes (84.8%) and being very different in composition to S2 and S3, dominated by anaerobes (96.9 and 96.5%, respectively). S2 and S3 biofilms remained attached to the electrodes. There was only minor evidence of fully reversible bidirectional EET. In conclusion the three triplicates fed with organic and/or inorganic carbon sources demonstrated two forms of diauxie: Firstly, S1-BES showed a preference for the electrode as the electron donor via mediated EET. Secondly, S2-BES and S3-BES showed a preference for acetate as electron donor and c-source, as long as this was available, switching to CO2 reduction, when acetate was depleted.

Retracted: The bidirectional extracellular electron transfer process aids iron cycling by Geoalkalibacter halelectricus in a highly saline-alkaline condition

Bidirectional extracellular electron transfer (EET) is crucial to upholding microbial metabolism with insoluble electron acceptors or donors in anoxic environments. Investigating bidirectional EET-capable microorganisms is desired to understand the cell-cell and microbe-mineral interactions and their role in mineral cycling besides leveraging their energy generation and conversion, biosensing, and bio-battery applications. Here, we report on iron cycling by haloalkaliphilic Geoalkalibacter halelectricus via bidirectional EET under haloalkaline conditions. It efficiently reduces Fe3+ oxide (Fe2O3) to Fe0 at a 0.75 ± 0.08 mM/mgprotein/d rate linked to acetate oxidation via outward EET and oxidizes Fe0 to Fe3+ at a 0.24 ± 0.03 mM/mgprotein/d rate via inward EET to reduce fumarate. Bioelectrochemical cultivation confirmed its outward and inward EET capabilities. It produced 895 ± 23 µA/cm2 current by linking acetate oxidation to anode reduction via outward EET and reduced fumarate by drawing electrons from the cathode (‒2.5 ± 0.3 µA/cm2) via inward EET. The cyclic voltammograms of G. halelectricus biofilms revealed redox moieties with different formal potentials, suggesting the involvement of different membrane components in bidirectional EET. The cyclic voltammetry and GC-MS analysis of the cell-free spent medium revealed the lack of soluble redox mediators, suggesting direct electron transfer by G. halelecctricus in achieving bidirectional EET. By reporting on the first haloalkaliphilic bacterium capable of oxidizing and reducing insoluble Fe0 and Fe3+ oxide, respectively, this study advances the limited understanding of the metabolic capabilities of extremophiles to respire on insoluble electron acceptors or donors via bidirectional EET and invokes the possible role of G. halelectricus in iron cycling in barely studied haloalkaline environments. IMPORTANCE Bidirectional extracellular electron transfer (EET) appears to be a key microbial metabolic process in anoxic environments that are depleted in soluble electron donor and acceptor molecules. Though it is an ecologically important and applied microbial phenomenon, it has been reported with a few microorganisms, mostly from nonextreme environments. Moreover, direct electron transfer-based bidirectional EET is studied for very few microorganisms with electrodes in engineered systems and barely with the natural insoluble electron acceptor and donor molecules in anoxic conditions. This study advances the understanding of extremophilic microbial taxa capable of bidirectional EET and its role in barely investigated Fe cycling in highly saline-alkaline environments. It also offers research opportunities for understanding the membrane components involved in the bidirectional EET of G. halelectricus. The high rate of Fe3+ oxide reduction activity by G. halelectricus suggests its possible use as a biocatalyst in the anaerobic iron bioleaching process under neutral-alkaline pH conditions.

A meta-analysis of acetogenic and methanogenic microbiomes in microbial electrosynthesis

A meta-analysis approach was used, to study the microbiomes of biofilms and planktonic communities underpinning microbial electrosynthesis (MES) cells. High-throughput DNA sequencing of 16S rRNA gene amplicons has been increasingly applied to understand MES systems. In this meta-analysis of 22 studies, we find that acetogenic and methanogenic MES cells share 80% of a cathodic core microbiome, and that different inoculum pre-treatments strongly affect community composition. Oxygen scavengers were more abundant in planktonic communities, and several key organisms were associated with operating parameters and good cell performance. We suggest Desulfovibrio sp. play a role in initiating early biofilm development and shaping microbial communities by catalysing H₂ production, to sustain either Acetobacterium sp. or Methanobacterium sp. Microbial community assembly became more stochastic over time, causing diversification of the biofilm (cathodic) community in acetogenic cells and leading to re-establishment of methanogens, despite inoculum pre-treatments. This suggests that repeated interventions may be required to suppress methanogenesis.

Electrogenic Bacteria Promise New Opportunities for Powering, Sensing, and Synthesizing

Considerable research efforts into the promises of electrogenic bacteria and the commercial opportunities they present are attempting to identify potential feasible applications. Metabolic electrons from the bacteria enable electricity generation sufficient to power portable or small-scale applications, while the quantifiable electric signal in a miniaturized device platform can be sensitive enough to monitor and respond to changes in environmental conditions. Nanomaterials produced by the electrogenic bacteria can offer an innovative bottom-up biosynthetic approach to synergize bacterial electron transfer and create an effective coupling at the cell-electrode interface. Furthermore, electrogenic bacteria can revolutionize the field of bioelectronics by effectively interfacing electronics with microbes through extracellular electron transfer. Here, these new directions for the electrogenic bacteria and their recent integration with micro- and nanosystems are comprehensively discussed with specific attention toward distinct applications in the field of powering, sensing, and synthesizing. Furthermore, challenges of individual applications and strategies toward potential solutions are provided to offer valuable guidelines for practical implementation. Finally, the perspective and view on how the use of electrogenic bacteria can hold immeasurable promise for the development of future electronics and their applications are presented.

Introducing Alternative Algorithms for the Determination of the Distribution of Relaxation Times

Impedance spectroscopy is a powerful characterization method to evaluate the performance of electrochemical systems. However, overlapping signals in the resulting impedance spectra oftentimes cause misinterpretation of the data. The distribution of relaxation times (DRT) method overcomes this problem by transferring the impedance data from the frequency domain into the time domain, which yields DRT spectra with an increased resolution. Unfortunately, the determination of the DRT is an ill‐posed problem, and appropriate mathematical regularizations become inevitable to find suitable solutions. The Tikhonov algorithm is a widespread method for computing DRT data, but it leads to unlikely spectra due to necessary boundaries. Therefore, we introduce the application of three alternative algorithms (Gold, Richardson Lucy, Sparse Spike) for the determination of stable DRT solutions and compare their performances. As the promising Sparse Spike deconvolution has a limited scope when using one single regularization parameter, we furthermore replaced the scalar regularization parameter with a vector. The resulting method is able to calculate well‐resolved DRT spectra.