Preparation of biological sustained-release nanocapsules and explore on algae-killing properties

Cobalt Phthalocyanine-Modified Magnetic Metal-Organic Frameworks for Specific Enrichment of Phosphopeptides

For mass spectrometry (MS)-based phosphoproteomics studies, sample pretreatment is an essential step for efficient identification of low-abundance phosphopeptides. Herein, a cobalt phthalocyanine-modified magnetic metal-organic framework (MOF) (Fe3O4@MIL-101-CoPc) was prepared and applied to enrich phosphopeptides before MS analysis. Fe3O4@MIL-101-CoPc exhibited an excellent magnetic response (74.98 emu g-1) and good hydrophilicity (7.75°), which were favorable for the enrichment. Fe3O4@MIL-101-CoPc showed good enrichment performance with high selectivity (1:1:5000), sensitivity (0.1 fmol), reusability (10 circles), and recovery (91.3%). Additionally, the Fe3O4@MIL-101-CoPc-based MS method was able to successfully detect 827 phosphopeptides from the A549 cell lysate, demonstrating a high enrichment efficiency (89.3%). This study promotes the application of postfunctionalized MOFs for phosphoproteomics analysis.

Carboxymethyl cellulose and metal-organic frameworks immobilized into polyacrylamide hydrogel for ultrahigh efficient and selective adsorption U(VI) from seawater

Metal-organic frameworks (MOF)-polymer hybrid hydrogel solves the processable forming of MOF powder and energy consumption of uranium extraction. However, the hybrid hydrogel by conventional synthesis methods inevitably lead to MOF agglomeration, poor filler-polymer interfacial compatibility and slowly adsorption. Herein, we designed that ZIF-67 was implanted into the carboxymethyl cellulose/polyacrylamide (CMC/PAM) by network-repairing strategy. The carboxyl and amino groups on the surface of CMC/PAM drive the uniform growth of ZIF-67 inside the CMC/PAM, which form an array of oriented and penetrating microchannels through coordination bonds. Our strategy eliminate the ZIF-67 agglomeration, increase the interfacial compatibility between MOF and polymer. The method also improve the free and fast diffusion of uranium in CMC/PAM/ZIF-67 hydrogel. According to the experimental, these enhancements synergistically enabled the CMC/PAM/ZIF-67 have a maximum adsorption capacity of 952 mg g-1. The adsorption process of CMC/PAM/ZIF-67 fits well with pseudo-second-order model and Langmuir isotherm. Meanwhile, the CMC/PAM/ZIF-67 maintain a high removal rate (87.3 %) and chemical stability even during ten adsorption-desorption cycles. It is worth noting that the adsorption amount of CMC/PAM/ZIF-67 in real seawater is 9.95 mg g-1 after 20 days, which is an ideal candidate adsorbent for uranium extraction from seawater.

Enrichment of Phosphopeptides Based on Zirconium Phthalocyanine-Modified Magnetic Nanoparticles

Highly selective extraction of phosphopeptides is necessary before mass spectrometry (MS) analysis. Herein, zirconium phthalocyanine-modified magnetic nanoparticles were prepared through a simple method. The Fe-O groups on Fe3O4 and the zirconium ions on phthalocyanine had a strong affinity for phosphopeptides based on immobilized metal ion affinity chromatography (IMAC). The enrichment platform exhibited low detection limit (0.01 fmol), high selectivity (α-/β-casein/bovine serum albumin, 1/1/5000), good reusability (10 circles), and recovery (91.1 ± 1.1%) toward phosphopeptides. Nonfat milk, human serum, saliva, and A549 cell lysate were employed as actual samples to assess the applicability of the enrichment protocol. Metallo-phthalocyanine will be a competitive compound for designing highly efficient adsorbents and offers a new approach to phosphopeptide analysis.

MOF-implanted poly (acrylamide-co-acrylic acid)/chitosan organic hydrogel for uranium extraction from seawater

In this study, a composite hydrogel with a low swelling ratio, excellent mechanical properties, and good U (VI) adsorption capacity was developed by incorporating a metal-organic framework (MOF) with a poly (acrylamide-co-acrylic acid)/chitosan (P(AM-co-AA)/CS) composite. The CS chain, which contains NH₂, reduces the swelling ratio of the hydrogel to 4.17 after 5 h of immersion in water. The coordinate bond between the MOF and carboxyl group on the surface of P(AM-co-AA)/CS improves the mechanical properties and stability of P(AM-co-AA)/CS. The U(VI) adsorption capacity of P(AM-co-AA)/CS/MOF-808 is 159.56 mg g^-1 at C₀ = 99.47 mg L^-1 and pH = 8.0. The adsorption process is well fitted by the Langmuir isotherm and pseudo-second-order model. The P(AM-co-AA)/CS/MOF-808 also exhibits good repeatability and stability after five adsorption-desorption cycles. The uranium adsorption capacity of the developed adsorbent after one month in natural seawater is 6.2 mg g^-1, and the rate of uranium adsorption on the hydrogel is 0.21 mg g^-1 day^-1.

Charge-reversible and biodegradable chitosan-based microgels for lysozyme-triggered release of vancomycin

INTRODUCTION

High-dose drug administration for the conventional treatment of inflammatory bowel disease induces cumulative toxicity and serious side effects. Currently, few reports have introduced smart carriers for intestinal inflammation targeting toward the treatment of inflammatory bowel disease.

OBJECTIVES

For the unique lysozyme secretory microenvironment of the inflamed intestine, vancomycin-loaded chitosan-polyaniline microgels (CH-PANI MGs) were constructed for lysozyme-triggered VM release.

METHODS

Aniline was first grafted to chitosan to form polymers that were crosslinked by glutaraldehyde to achieve CH-PANI MGs using the inverse (water-in-oil) miniemulsion method. Interestingly, CH-PANI MGs exhibit polyampholyte behaviour and display charge-reversible behaviour (positive to negative charges) after treatment with a NaCl solution.

RESULTS

The formed negatively charged N-CH-PANI MG aqueous solution is employed to load cationic vancomycin with a satisfactory loading efficiency of 91.3%, which is significantly higher than that of chitosan-based MGs. Moreover, N-CH-PANI MGs present lysozyme-triggered biodegradation and controllable vancomycin release upon the cleavage of glycosidic linkages of chitosan. In the simulated inflammatory intestinal microenvironment, vancomycin is rapidly released, and the cumulative release reaches approximately 76.9%. Remarkably, N-CH-PANI@VM MGs not only exhibit high resistance to harsh gastric acidity but also prevent the premature leakage of vancomycin in the healthy gastrointestinal tract. Encouragingly, the N-CH-PANI@VM MGs show obvious antibacterial activity against Staphylococcus aureus at a relatively low concentration of 20 μg/mL.

CONCLUSION

Compared to other pH-responsive carriers used to treat inflammatory bowel disease, the key advantage of lysozyme-responsive MGs is that they further specifically identify healthy and inflammatory intestines, achieving efficient inflammatory bowel disease treatment with few side effects. With this excellent performance, the developed smart MGs might be employed as a potential oral delivery system for inflammatory bowel disease treatment.

Polymeric nanocapsules: A review on design and production methods for pharmaceutical purpose

Polymeric nanocapsules have extensive application potential in medical, biological, and pharmaceutical fields, and, therefore, much research has been dedicated to their production. Indeed, production protocols and the materials used are decisive for obtaining the desired nanocapsules characteristics and biological performance. In addition to that, several technological strategies have been developed in the last decade to improve processing techniques and form more valuable nanocapsules. This review provides a guide to current methods for developing polymeric nanocapsules, reporting aspects to be considered when choosing appropriate materials, and discussing different ways to produce nanocapsules for superior performances.