A finite viscoelastic-plastic model for describing the uniaxial ratchetting of soft biological tissues

Influence of Wire Geometry on the Mechanical Behavior of the TiNi Design

The present article is aimed at studying the deformation behavior of TiNi wire and knitted metal TiNi mesh under uniaxial tension and revealing the role of wire geometry on their main mechanical characteristics and mechanisms of deformation behavior. The temperature dependence curve of the electrical resistance indicates that a two-stage martensitic transformation of B2→R→B19′ is occurring, and is responsible for the superelasticity effect. The TEM results showed that at room temperature, the TiNi wire has a nanocrystalline structure composed of B2 austenite grains. A change in the deformation mechanism was established under the uniaxial tension, where the TiNi wire exhibits the effect of superelasticity, while the knitted metal TiNi mesh made from this wire is characterized by hyperelastic behavior. Fracturing of the knitted metal TiNi mesh requires significant loads of up to 3500 MPa compared to the fracture load of the TiNi wire. With the uniaxial tension of the wire, which maximally repeats the geometry of the wire in knitted metal mesh, an increase in mechanical characteristics was observed.

An elasto-viscoplastic model to describe the ratcheting behavior of articular cartilage

In the present work, a constitutive model for articular cartilage is proposed in finite elasto-viscoplasticity. For simplification, articular cartilage is supposed to be a typical composite composed of a soft basis and a fiber assembly. The stress tensor and free energy function are hence accordingly divided into two components. The high nonlinear stress-strain response is assumed to be mainly related to the fiber assembly and described by an exponential-type hypoelastic relation. Ratcheting is considered according to the viscoplasticity, the evolution rule of which is deduced from the dissipative inequality by the co-directionality hypotheses. Then, the capability of the proposed model is validated by comparing its predictions with related experimental observations. Results show that the ratcheting behavior and stress-strain hysteresis loops are reasonably captured by the proposed model.

Logarithmic rate based elasto-viscoplastic cyclic constitutive model for soft biological tissues

Based on the logarithmic rate and piecewise linearization theory, a thermodynamically consistent elasto-viscoplastic constitutive model is developed in the framework of finite deformations to describe the nonlinear time-dependent biomechanical performances of soft biological tissues, such as nonlinear anisotropic monotonic stress-strain responses, stress relaxation, creep and ratchetting. In the proposed model, the soft biological tissue is assumed as a typical composites consisting of an isotropic matrix and anisotropic fiber aggregation. Accordingly, the free energy function and stress tensor are divided into two parts related to the matrix and fiber aggregation, respectively. The nonlinear biomechanical responses of the tissues are described by the piecewise linearization theory with hypo-elastic relations of fiber aggregation. The evolution equations of viscoplasticity are formulated from the dissipation inequalities by the co-directionality hypotheses. The anisotropy is considered in the hypo-elastic relations and viscoplastic flow rules by introducing some material parameters dependent on the loading direction. Then the capability of the proposed model to describe the nonlinear time-dependent deformation of soft biological tissues is verified by comparing the predictions with the corresponding experimental results of three tissues. It is seen that the predicted monotonic stress-strain responses, stress relaxation, creep and ratchetting of soft biological tissues are in good agreement with the corresponding experimental ones.

A fibre-reinforced poroviscoelastic model accurately describes the biomechanical behaviour of the rat Achilles tendon

Background

Computational models of Achilles tendons can help understanding how healthy tendons are affected by repetitive loading and how the different tissue constituents contribute to the tendon’s biomechanical response. However, available models of Achilles tendon are limited in their description of the hierarchical multi-structural composition of the tissue. This study hypothesised that a poroviscoelastic fibre-reinforced model, previously successful in capturing cartilage biomechanical behaviour, can depict the biomechanical behaviour of the rat Achilles tendon found experimentally.

Materials and Methods

We developed a new material model of the Achilles tendon, which considers the tendon’s main constituents namely: water, proteoglycan matrix and collagen fibres. A hyperelastic formulation of the proteoglycan matrix enabled computations of large deformations of the tendon, and collagen fibres were modelled as viscoelastic. Specimen-specific finite element models were created of 9 rat Achilles tendons from an animal experiment and simulations were carried out following a repetitive tensile loading protocol. The material model parameters were calibrated against data from the rats by minimising the root mean squared error (RMS) between experimental force data and model output.

Results and Conclusions

All specimen models were successfully fitted to experimental data with high accuracy (RMS 0.42-1.02). Additional simulations predicted more compliant and soft tendon behaviour at reduced strain-rates compared to higher strain-rates that produce a stiff and brittle tendon response. Stress-relaxation simulations exhibited strain-dependent stress-relaxation behaviour where larger strains produced slower relaxation rates compared to smaller strain levels. Our simulations showed that the collagen fibres in the Achilles tendon are the main load-bearing component during tensile loading, where the orientation of the collagen fibres plays an important role for the tendon’s viscoelastic response. In conclusion, this model can capture the repetitive loading and unloading behaviour of intact and healthy Achilles tendons, which is a critical first step towards understanding tendon homeostasis and function as this biomechanical response changes in diseased tendons.