Effects of fixation and preservation on tissue elastic properties measured by quantitative optical coherence elastography (OCE)

Suitably Incorporated Hydrophobic, Redox-Active Drug in Poly Lactic Acid-Graphene Nanoplatelet Composite Generates 3D-Printed Medicinal Patch for Electrostimulatory Therapeutics

Polymer carbon composites have been reported for improved mechanical, thermal and electrical properties to provide reduced side effect by 3D printing personalized biomedical drug delivery devices. But control on homogeneity in loading and release of dopants like carbon allotropes and drugs, respectively, in the bulk and on the surface has always been a challenge. Herein, we are reporting a methodological cascade to achieve a model, customizable, 3D printed, homogeneously layered and electrically stimulatory, PLA-Graphene nanoplatelet (hl-PLGR) based drug delivery device, called 3D-est-MediPatch. The medicinal patch has been prepared by 3D-printing a Nic-hl-PLGR composite obtained by incorporating a redox active model drug, niclosamide (Nic) in hl-PLGR. The composite of Nic-hl-PLGR was characterized in three sequentially complex forms─composite film, hot melt extruded (HME) filament, and 3D printed (3DP) patches to understand the effect of filament extrusion and 3D-printing processes on Nic-hl-PLGR composite and overall drug incorporation efficiency and control. The incorporation of graphene was found to improve the homogeneity of the drug, and the hot melt extrusion improved the dispersion of drug and graphene fillers in the composite. The electroresponsive drug release from the Nic-hl-PLGR composite was found to be controllably accelerated compared to the drug release by diffusion, in simulated buffer condition. The released drug concentration was found to reach within the IC50 range for malignant melanoma cell (A375) and showed in vitro selectively, with reduced effects in noncancerous, fibroblast cells (NIH3T3). Further, the feasibility of application for this system was assessed in generating personalized 3D-est-MediPatch for skin, liver and spleen tissues in ex-vivo scenario. It showed excellent feasibility and efficacy of the 3D-est-MediPatch in controlled and personalized release of drugs during electrostimulation. Thus, a model platform, 3D-est-MediPatch, could be achieved by suitably incorporating a hydrophobic, redox-active drug (niclosamide) in poly lactic acid-graphene nanoplatelet composite for electrostimulatory therapeutics with reduced side effects.

Magneto-acoustic protein nanostructures for non-invasive imaging of tissue mechanics in vivo

Measuring cellular and tissue mechanics inside intact living organisms is essential for interrogating the roles of force in physiological and disease processes. Current agents for studying the mechanobiology of intact, living organisms are limited by poor light penetration and material stability. Magnetomotive ultrasound is an emerging modality for real-time in vivo imaging of tissue mechanics. Nonetheless, it has poor sensitivity and spatiotemporal resolution. Here we describe magneto-gas vesicles (MGVs), protein nanostructures based on gas vesicles and magnetic nanoparticles that produce differential ultrasound signals in response to varying mechanical properties of surrounding tissues. These hybrid nanomaterials significantly improve signal strength and detection sensitivity. Furthermore, MGVs enable non-invasive, long-term and quantitative measurements of mechanical properties within three-dimensional tissues and in vivo fibrosis models. Using MGVs as novel contrast agents, we demonstrate their potential for non-invasive imaging of tissue elasticity, offering insights into mechanobiology and its application to disease diagnosis and treatment.

Biomechanical assessment of gastrocnemii and Achilles tendon using MyotonPRO: in vivo measurements, and preliminary in situ measurements using formalin-fixed tissues

PURPOSE

This study aims to evaluate the reliability and validity of using MyotonPRO to quantify the mechanical properties of the muscle-tendon unit through in vivo measurements and preliminary in situ measurements using formalin-fixed tissues.

MATERIALS AND METHODS

The mechanical properties of gastrocnemii and the Achilles tendon of 12 healthy adults (six males and six females, 34.9 ± 5.8 years) were examined for in vivo test twice within a day and once post-24 hours using MyotonPRO, while nine human cadavers (formalin-fixed, 3 males and 6 females, 89.9 ± 5.1 years) were assessed for preliminary in situ test with identical time schedule to evaluate the within-day and inter-day reliability and validity.

RESULTS

In vivo tests had very high within-day (ICC: 0.96-0.99) and inter-day reliability (ICC: 0.83-0.96), while in situ tests (formalin-fixed tissues) showed high within-day (ICC: 0.87-0.99) and inter-day reliability (ICC: 0.76-0.98) for the results of tone and stiffness. There was no significant difference in the stiffness of the free part of the Achilles tendon between in vivo and in situ conditions. The stiffness of the lateral gastrocnemius (r = 0.55, p = 0.018), proximal part of the Achilles tendon (r = 0.56, p = 0.015), and free part of the Achilles tendon (r = 0.47, p = 0.048) before removing the skin was significantly correlated with that after removing the skin condition.

CONCLUSIONS

The findings of the current study suggest that MyotonPRO is reliable and valid for evaluating tendon stiffness both in vivo and in situ (formalin-fixed tissues).

The CathPilot: Performance Validation and Preclinical Safety and Feasibility Assessment

OBJECTIVES

Peripheral endovascular revascularization procedures often fail due to technical limitations of guidewire support, steering, and visualization. The novel CathPilot catheter aims to address these challenges. This study assesses the safety and feasibility of the CathPilot and compares its performance to conventional catheters for peripheral vascular interventions.

METHODS

The study compared the CathPilot to non-steerable and steerable catheters. The success rates and access times for a relevant target inside a tortuous vessel phantom model were assessed. The reachable workspace within the vessel and the guidewire's force delivery capabilities were also evaluated. To validate the technology, chronic total occlusion tissue samples were used ex vivo to compare crossing success rates with conventional catheters. Finally, in vivo experiments in a porcine aorta were conducted to evaluate safety and feasibility.

RESULTS

The success rates for reaching the set targets were 31%, 69%, and 100% with the non-steerable catheter, the steerable catheter, and the CathPilot, respectively. CathPilot had a significantly larger reachable workspace, and allowed for up to four times higher force delivery and pushability. In crossing of chronic total occlusion samples, the CathPilot achieved a success rate of 83% and 100%, for fresh and fixed lesions respectively, which was also significantly higher than conventional catheters. The device was fully functional in the in vivo study, and there were no signs of coagulation or damage to the vessel wall.

CONCLUSION

This study shows the safety and feasibility of the CathPilot system and its potential to reduce failure and complication rates in peripheral vascular interventions. The novel catheter outperformed conventional catheters in all defined metrics. This technology can potentially improve the success rate and outcome of peripheral endovascular revascularization procedures.

Morphology of the quadriceps tendon and its patella insertion site on three-dimensional computed tomography and magnetic resonance imaging: A cadaveric study

AIM

This study was conducted to clarify the morphological properties of the quadriceps tendon (QT) and its patella insertion site using three-dimensional computed tomography and magnetic resonance imaging.

METHODS

Twenty-one right knees from human cadavers were evaluated using three-dimensional computed tomography and magnetic resonance imaging. The morphologies of the QT and its patella insertion site were evaluated, along with intra-tendon differences in length, width, and thickness.

RESULTS

The QT insertion site on the patella was dome-shaped without characteristic bony features. The mean surface area of the insertion site was 502.5 ± 68.5 mm2 (range, 336.0-610.7). The QT was longest 2.0 mm lateral to the central width of the insertion and gradually became shorter toward both edges (mean length, 59.7 ± 8.3 mm). The QT was widest at the insertion site (mean width, 39.1 ± 5.3 mm) and gradually became narrower toward the proximal side. The QT was thickest 2.0 mm medial to the center (mean thickness, 11.4 ± 1.9 mm).

CONCLUSION

The morphological properties of the QT and its insertion site were consistent. The characteristics of the QT graft depend on the harvested region.

Experimental Protocol and Phantom Design and Development for Performance Characterization of Conventional Devices for Peripheral Vascular Interventions

Conventional catheter-based interventions for treating peripheral artery disease suffer high failure and complication rates. The mechanical interactions with the anatomy constrain catheter controllability, while their length and flexibility limit their pushability. Also, the 2D X-ray fluoroscopy guiding these procedures fails to provide sufficient feedback about the device location relative to the anatomy. Our study aims to quantify the performance of conventional non-steerable (NS) and steerable (S) catheters in phantom and ex vivo experiments. In a 10 mm diameter, 30 cm long artery phantom model, with four operators, we evaluated the success rate and crossing time in accessing 1.25 mm target channels, the accessible workspace, and the force delivered through each catheter. For clinical relevance, we evaluated the success rate and crossing time in crossing ex vivo chronic total occlusions. For the S and NS catheters, respectively, users successfully accessed 69 and 31% of the targets, 68 and 45% of the cross-sectional area, and could deliver 14.2 and 10.2 g of mean force. Using a NS catheter, users crossed 0.0 and 9.5% of the fixed and fresh lesions, respectively. Overall, we quantified the limitations of conventional catheters (navigation, reachable workspace, and pushability) for peripheral interventions; this can serve as a basis for comparison with other devices.

Atomic Force Microscopy Micro-Indentation Methods for Determining the Elastic Modulus of Murine Articular Cartilage

The mechanical properties of biological tissues influence their function and can predict degenerative conditions before gross histological or physiological changes are detectable. This is especially true for structural tissues such as articular cartilage, which has a primarily mechanical function that declines after injury and in the early stages of osteoarthritis. While atomic force microscopy (AFM) has been used to test the elastic modulus of articular cartilage before, there is no agreement or consistency in methodologies reported. For murine articular cartilage, methods differ in two major ways: experimental parameter selection and sample preparation. Experimental parameters that affect AFM results include indentation force and cantilever stiffness; these are dependent on the tip, sample, and instrument used. The aim of this project was to optimize these experimental parameters to measure murine articular cartilage elastic modulus by AFM micro-indentation. We first investigated the effects of experimental parameters on a control material, polydimethylsiloxane gel (PDMS), which has an elastic modulus on the same order of magnitude as articular cartilage. Experimental parameters were narrowed on this control material, and then finalized on wildtype C57BL/6J murine articular cartilage samples that were prepared with a novel technique that allows for cryosectioning of epiphyseal segments of articular cartilage and long bones without decalcification. This technique facilitates precise localization of AFM measurements on the murine articular cartilage matrix and eliminates the need to separate cartilage from underlying bone tissues, which can be challenging in murine bones because of their small size. Together, the new sample preparation method and optimized experimental parameters provide a reliable standard operating procedure to measure microscale variations in the elastic modulus of murine articular cartilage.

Comparison of Thiel preserved, fresh human, and animal liver tissue in terms of mechanical properties

BACKGROUND

In medical training and research fresh human tissue is often replaced by preserved human or fresh animal tissue, due to availability and ethical reasons. Newer preservation approaches, such as the Thiel method, promise more realistic mechanical properties than conventional formaldehyde fixation. Concerning animal substitute material, porcine and bovine tissue is often chosen, as it is easily obtainable and certain similarity to human tissue is assumed. However, it has not been thoroughly investigated how Thiel preservation changes non-linear and viscoelastic behaviour of soft organ tissues. Furthermore, differences in these properties between animal tissue and human tissue have not been previously corroborated.

METHODS

We conducted ramp and relaxation tensile tests on fresh human and Thiel preserved hepatic tissue, extracting strain-specific elastic moduli, and viscoelastic properties. The results for fresh human liver were then compared to corresponding results for Thiel preserved liver, as well as previously published results for porcine and bovine liver.

RESULTS

Our results showed that Thiel preservation seems to be associated with increased stiffness as well as decreased viscoelastic damping behaviour. Porcine liver was stiffer than human liver with similar viscoelastic properties. Bovine liver exhibited similar stiffness as human liver, however lower viscoelastic damping.

CONCLUSIONS

The differences between human and animal liver tissue, concerning their mechanical properties, can be explained by their characteristic histology. Changes in mechanical properties due to Thiel preservation might stem from altered protein cross-linking and dehydration. The results illustrate that appropriate materials for medical training systems must be selected based on which mechanical properties are relevant for the respective application.

Topographic Guidance in Melt-Electrowritten Tubular Scaffolds Enhances Engineered Kidney Tubule Performance

Introduction: To date, tubular tissue engineering relies on large, non-porous tubular scaffolds (Ø > 2 mm) for mechanical self-support, or smaller (Ø 150-500 μm) tubes within bulk hydrogels for studying renal transport phenomena. To advance the engineering of kidney tubules for future implantation, constructs should be both self-supportive and yet small-sized and highly porous. Here, we hypothesize that the fabrication of small-sized porous tubular scaffolds with a highly organized fibrous microstructure by means of melt-electrowriting (MEW) allows the development of self-supported kidney proximal tubules with enhanced properties. Materials and Methods: A custom-built melt-electrowriting (MEW) device was used to fabricate tubular fibrous scaffolds with small diameter sizes (Ø = 0.5, 1, 3 mm) and well-defined, porous microarchitectures (rhombus, square, and random). Human umbilical vein endothelial cells (HUVEC) and human conditionally immortalized proximal tubular epithelial cells (ciPTEC) were seeded into the tubular scaffolds and tested for monolayer formation, integrity, and organization, as well as for extracellular matrix (ECM) production and renal transport functionality. Results: Tubular fibrous scaffolds were successfully manufactured by fine control of MEW instrument parameters. A minimum inner diameter of 1 mm and pore sizes of 0.2 mm were achieved and used for subsequent cell experiments. While HUVEC were unable to bridge the pores, ciPTEC formed tight monolayers in all scaffold microarchitectures tested. Well-defined rhombus-shaped pores outperformed and facilitated unidirectional cell orientation, increased collagen type IV deposition, and expression of the renal transporters and differentiation markers organic cation transporter 2 (OCT2) and P-glycoprotein (P-gp). Discussion and Conclusion: Here, we present smaller diameter engineered kidney tubules with microgeometry-directed cell functionality. Due to the well-organized tubular fiber scaffold microstructure, the tubes are mechanically self-supported, and the self-produced ECM constitutes the only barrier between the inner and outer compartment, facilitating rapid and active solute transport.

Biomechanics of Ankle Ligament Reconstruction: A Cadaveric Study to Compare Stability of Reconstruction Techniques Using 1 or 2 Fibular Tunnels

Background

Anatomic lateral ankle ligament reconstruction has been proposed for patients with chronic ankle instability. A reliable approach is a reconstruction technique using an allograft and 2 fibular tunnels. A recently introduced approach that entails 1-fibular tunnel reconstruction might reduce the risk of intraoperative complications and ultimately improve patient outcome.

Hypothesis

We hypothesized that both reconstruction techniques show similar ankle stability (joint laxity and stiffness) and are similar to the intact joint condition.

Study Design

Controlled laboratory study.

Methods

A total of 10 Thiel-conserved cadaveric ankles were divided into 2 groups and tested in 3 stages-intact, transected, and reconstructed lateral ankle ligaments-using either the 1- or the 2-fibular tunnel technique. To quantify stability in each stage, anterior drawer and talar tilt tests were performed in 0°, 10°, and 20° of plantarflexion (anterior drawer test) or dorsiflexion (talar tilt test). Bone displacements were measured using motion capture, from which laxity and stiffness were calculated together with applied forces. Finally, reconstructed ligaments were tested to failure in neutral position with a maximal applicable torque in inversion. A mixed linear model was used to describe and compare the outcomes.

Results

When ankle stability of intact and reconstructed ligaments was compared, no significant difference was found between reconstruction techniques for any flexion angle. Also, no significant difference was found when the maximal applicable torque of the 1-tunnel technique (9.1 ± 4.4 N·m) was compared with the 2-tunnel technique (8.9 ± 4.8 N·m).

Conclusion

Lateral ankle ligament reconstruction with an allograft using 1 fibular tunnel demonstrated similar biomechanical stability to the 2-tunnel approach.

Clinical Relevance

Demonstrating similar stability in a cadaveric study and given the potential to reduce intraoperative complications, the 1-fibular tunnel approach should be considered a viable option for the surgical therapy of chronic ankle instability. Clinical randomized prospective trials are needed to determine the clinical outcome of the 1-tunnel approach.

Micro-indentation and optical coherence tomography for the mechanical characterization of embryos: Experimental setup and measurements on chicken embryos

The investigation of the mechanical properties of embryos is expected to provide valuable information on the phenomenology of morphogenesis. It is thus believed that, by mapping the viscoelastic features of an embryo at different stages of growth, it may be possible to shed light on the role of mechanics in embryonic development. To contribute to this field, we present a new instrument that can determine spatiotemporal distributions of mechanical properties of embryos over a wide area and with unprecedented accuracy. The method relies on combining ferrule-top micro-indentation, which provides local measurements of viscoelasticity, with Optical Coherence Tomography, which can reveal changes in tissue morphology and help the user identify the indentation point. To prove the working principle, we have collected viscoelasticity maps of fixed and live HH11-HH12 chicken embryos. Our study shows that the instrument can reveal correlations between tissue morphology and mechanical behavior. STATEMENT OF SIGNIFICANCE: Local mechanical properties of soft biological tissue play a crucial role in several biological processes, including cell differentiation, cell migration, and body formation; therefore, measuring tissue properties at high resolution is of great interest in biology and tissue engineering. To provide an efficient method for the biomechanical characterization of soft biological tissues, we introduce a new tool in which the combination of non-invasive Optical Coherence Tomography imaging and depth-controlled indentation measurements allows one to map the viscoelastic properties of biological tissue and investigate correlations between local mechanical features and tissue morphology with unprecedented resolution.

Attenuation Measuring Ultrasound Shearwave Elastography as a Method for Evaluating Pancreatic Viscoelasticity

Pancreatic cancer is the fourth most common cause of cancer-related fatalities as there are a limited number of tools to diagnose this disease in its early stages. Pancreatitis is characterized as an inflammation of the pancreatic tissue due to an excess amount of pancreatic enzymes remaining in the organ. Both of these diseases result in a stiffening of the tissue which makes them suitable for the use of elastography techniques as a diagnostic method. However, these methods typically assume that the tissue is purely elastic when biological tissue is inherently viscoelastic. The attenuation measuring ultrasound shear elastography (AMUSE) method, which measures both attenuation and shear wave velocity was used to characterize the viscoelasticity of pancreatic tissue. This method was tested in ex vivo normal porcine samples that were also stiffened in formalin and in vivo by conducting studies in healthy human subjects. Ex vivo testing showed ranges of phase velocity, group velocity, and phase attenuation values of 1.05 - 1.33 m/s, 0.83 - 1.12 m/s, and 183 - 210 Np/m. After immersing the ex vivo tissue in formalin there was a distinguishable difference between normal and stiffened tissue. This study produced percent difference ranges of phase velocity, group velocity, and phase attenuation from 0 to 100 minutes in formalin of 30.0% - 56.5%, 38.2% - 58.6%, and 55.8% - 64.8%, respectively. The ranges of phase velocity, group velocity, and phase attenuation results in human subjects were 1.53 - 1.60 m/s, 1.76 - 1.91 m/s, and 196 - 204 Np/m, respectively. These results were within a similar range reported by other elastography techniques. Further work with the AMUSE method in subjects with pancreatitis and cancer is needed to determine its effectiveness in showing a difference between healthy and diseased tissue in humans.

Evaluation of Formalin Fixation for Tissue Biopsies Using Shear Wave Laser Speckle Imaging System

Chemical fixation is the slowest and often the most uncontrolled step in the multi-step process of preparing tissue for histopathology. In order to reduce the time from taking a core needle biopsy to making a diagnosis, a new approach is proposed that optically monitors the common formalin fixation process. A low-cost and highly-sensitive laser speckle imaging technique is developed to measure shear wave velocity in a biospecimen as small as 0.5 mm in thickness submerged in millifluidic channels. Shear wave velocity, which is the indicator of tissue mechanical property and induced by piezoelectric-actuation, was monitored using gelatin phantom and chicken breast during fixation, as well as post-fixed liver and colon tissues from human. Fixation levels in terms of shear wave velocity increased by approximately 271.0% and 130.8% in gelatin phantom and chicken breast, respectively, before reaching the plateaus at 10.91 m/s and 7.88 m/s. Within these small specimens, the plateaus levels and times varied with location of measurement, and between gelatin and chicken breast. This optical-based approach demonstrates the feasibility of fine-tuning preanalytical variables, such as fixation time, for a rapid and accurate histopathological evaluation; provides a quality metric during the tissue preparation protocol performed in most pathology labs; and introduces the millifluidic chamber that can be engineered to be a future disposable device that automates biopsy processing and imaging.

Morphology of the patellar tendon and its insertion sites using three-dimensional computed tomography: A cadaveric study

BACKGROUND

To clarify, with three-dimensional (3D) images, the morphological properties of the patellar tendon and both of its insertion sites.

METHODS

Thirty-two human cadaveric left knees were evaluated, and 3D computed tomography images were created. These images were used to analyse the morphology of both insertion sites of the patellar tendon, and the width, length and thickness of each region of the patellar tendon.

RESULTS

The insertion sites of the patellar tendon on the patellar and tibial sides were V-shaped and crescent-shaped, respectively, with the respective bony apexes located at 44.5 ± 2.2% (standard deviation) and 35.5 ± 2.8% of the tendon width from its medial edge. The proximal, central and distal widths of the patellar tendon were 29.9 ± 2.7 mm, 27.3 ± 2.5 mm and 25.0 ± 2.4 mm, respectively. The length of the patellar tendon was shortest at 40.6% ± 6.7% of the central width and gradually became longer toward both edges. The patellar tendon was thickest in the central portion of 40-75% and gradually became thinner toward both edges.

CONCLUSIONS

The morphological properties of the patellar tendon and its insertion sites on both the patellar and tibial sides were consistent. These findings indicate that the characteristics of the bone-patellar tendon-bone graft markedly depend on the location from which it is harvested, and that these characteristics contribute to predicting the length, width and shapes of the bone plugs of the graft when performing bone-patellar tendon-bone surgery.

Microscale characterization of prostate biopsies tissues using optical coherence elastography and second harmonic generation imaging

Photonics, especially optical coherence elastography (OCE) and second harmonic generation (SHG) imaging are novel high-resolution imaging modalities for characterization of biological tissues. Following our preliminary experience, we hypothesized that OCE and SHG imaging would delineate the microstructure of prostate tissue and aid in distinguishing cancer from the normal benign prostatic tissue. Furthermore, these approaches may assist in characterization of the grade of cancer, as well. In this study, we confirmed a high diagnostic accuracy of OCE and SHG imaging in the detection and characterization of prostate cancer for a large set of biopsy tissues obtained from men suspected to have prostate cancer using transrectal ultrasound (TRUS). The two techniques and methods described here are complementary, one depicts the stiffness of tissues and the other illustrates the orientation of collagen structure around the cancerous lesions. The results showed that stiffness of cancer tissue was ~57.63% higher than that of benign tissue (Young's modulus of 698.43±125.29 kPa for cancerous tissue vs 443.07±88.95 kPa for benign tissue with OCE. Using histology as a reference standard and 600 kPa as a cut-off threshold, the data analysis showed sensitivity and specificity of 89.6 and 99.8%, respectively. Corresponding positive and negative predictive values were 99.5 and 94.6%, respectively. There was a significant difference noticed in terms of Young's modulus for different Gleason scores estimated by OCE (P-value<0.05). For SHG, distinct patterns of collagen distribution were seen for different Gleason grade disease with computed quantification employing a ratio of anisotropic to isotropic (A:I ratio) and this correlated with disease aggressiveness.

MR elastography to measure the effects of cancer and pathology fixation on prostate biomechanics, and comparison with T 1, T 2 and ADC

MRI is under evaluation for image-guided intervention for prostate cancer. The sensitivity and specificity of MRI parameters is determined via correlation with the gold-standard of histopathology. Whole-mount histopathology of prostatectomy specimens can be digitally registered to in vivo imaging for correlation. When biomechanical-based deformable registration is employed to account for deformation during histopathology processing, the ex vivo biomechanical properties are required. However, these properties are altered by pathology fixation, and vary with disease. Hence, this study employs magnetic resonance elastography (MRE) to measure ex vivo prostate biomechanical properties before and after fixation. A quasi-static MRE method was employed to measure high resolution maps of Young's modulus (E) before and after fixation of canine prostate and prostatectomy specimens (n  =  4) from prostate cancer patients who had previously received radiation therapy. For comparison, T ₁, T ₂ and apparent diffusion coefficient (ADC) were measured in parallel. E (kPa) varied across clinical anatomy and for histopathology-identified tumor: peripheral zone: 99(±22), central gland: 48(±37), tumor: 85(±53), and increased consistently with fixation (factor of 11  ±  5; p  <  0.02). T ₂ decreased consistently with fixation, while changes in T ₁ and ADC were more complex and inconsistent. The biomechanics of the clinical prostate specimens varied greatly with fixation, and to a lesser extent with disease and anatomy. The data obtained will improve the precision of prostate pathology correlation, leading to more accurate disease detection and targeting.

Anatomic dissection of the anterolateral ligament (ALL) in paired fresh-frozen cadaveric knee joints

INTRODUCTION

Different dissection studies as well as comparative studies about the anterolateral ligament of the knee (ALL) already exist and the structure's topology and properties have been shown. However, most of the studies investigating the ligament were performed in embalmed knees, which is thought to change the structural integrity of ligaments and thus the topologic and dynamic measurements. Since the biomechanical function of the ALL is not fully understood until today and a correlation with the pivot shift phenomenon is yet speculative, further studies will have to clarify its definitive importance. Its function as a limiter of internal rotation and lateral meniscal extrusion leads to the assumption of a secondary knee stabilizer.

METHODS

Twenty paired fresh-frozen cadaveric knees of ten donors have been dissected in a layerwise fashion. After identification of the ALL, topologic measurements were undertaken using a digital caliper.

RESULTS

The ALL could be identified as a tender, pearly structure in front of the anterolateral joint capsule in only 60% of the dissected knee joints. Only 20% of donors had a bilateral ALL while 80% had an ALL only in one side. Mean length, thickness and width as well as topographic measurements were comparable to other available studies investigating fresh-frozen cadavers.

CONCLUSION

Anatomy and topography of the ALL seem to be highly variable, but consistent within certain borders. Prevalence has to be argued though as it strongly differs between studies. The impact of an ALL absence, even if only unilateral, needs to be investigated in clinical and imaging studies to finally clarify its importance.