Micropipette aspiration method for characterizing biological materials with surface energy

An in-silico study on the mechanical behavior of colorectal cancer cell lines in the micropipette aspiration process

Cancer alters the structural integrity and morphology of cells. Consequently, the cell function is overshadowed. In this study, the micropipette aspiration process is computationally modeled to predict the mechanical behavior of the colorectal cancer cells. The intended cancer cells are modeled as an incompressible Neo-Hookean visco-hyperelastic material. Also, the micropipette is assumed to be rigid with no deformation. The proposed model is validated with an in-vitro study. To capture the equilibrium and time-dependent behaviors of cells, ramp, and creep tests are respectively performed using the finite element method. Through the simulations, the effects of the micropipette geometry and the aspiration pressure on the colorectal cancer cell lines are investigated. Our findings indicate that, as the inner radius of the micropipette increases, despite the increase in deformation rate and aspirated length, the time to reach the equilibrium state increases. Nevertheless, it is obvious that increasing the tip curvature radius has a small effect on the change of the aspirated length. But, due to the decrease in the stress concentration, it drastically reduces the equilibrium time and increases the deformation rate significantly. Interestingly, our results demonstrate that increasing the aspiration pressure somehow causes the cell stiffening, thereby reducing the upward trend of deformation rate, equilibrium time, and aspirated length. Our findings provide valuable insights for researchers in cell therapy and cancer treatment and can aid in developing more precise microfluidic.

Photocell-Based Optofluidic Device for Clogging-Free Cell Transit Time Measurements

Measuring the transit time of a cell forced through a bottleneck is one of the most widely used techniques for the study of cell deformability in flow. It in turn provides an accessible and rapid way of obtaining crucial information regarding cell physiology. Many techniques are currently being investigated to reliably retrieve this time, but their translation to diagnostic-oriented devices is often hampered by their complexity, lack of robustness, and the bulky external equipment required. Herein, we demonstrate the benefits of coupling microfluidics with an optical method, like photocells, to measure the transit time. We exploit the femtosecond laser irradiation followed by chemical etching (FLICE) fabrication technique to build a monolithic 3D device capable of detecting cells flowing through a 3D non-deformable constriction which is fully buried in a fused silica substrate. We validated our chip by measuring the transit times of pristine breast cancer cells (MCF-7) and MCF-7 cells treated with Latrunculin A, a drug typically used to increase their deformability. A difference in transit times can be assessed without the need for complex external instrumentation and/or demanding computational efforts. The high throughput (4000-10,000 cells/min), ease of use, and clogging-free operation of our device bring this approach much closer to real scenarios.

Quantifying both viscoelasticity and surface tension: Why sharp tips overestimate cell stiffness

Quantifying the mechanical properties of cells is important to better understand how mechanics constrain cellular processes. Furthermore, because pathologies are usually paralleled by altered cell mechanical properties, mechanical parameters can be used as a novel way to characterize the pathological state of cells. Key features used in models are cell tension, cell viscoelasticity (representing the average of the cell bulk), or a combination of both. It is unclear which of these features is the most relevant or whether both should be included. To clarify this, we performed microindentation experiments on cells with microindenters of various tip radii, including micrometer-sized microneedles. We obtained different cell-indenter contact radii and measured the corresponding contact stiffness. We derived a model predicting that this contact stiffness should be an affine function of the contact radius and that, at vanishing contact radius, the cell stiffness should be equal to the cell tension multiplied by a constant. When microindenting leukocytes and both adherent and trypsinized adherent cells, the contact stiffness was indeed an affine function of the contact radius. For leukocytes, the deduced surface tension was consistent with that measured using micropipette aspiration. For detached endothelial cells, agreement between microindentation and micropipette aspiration was better when considering these as only viscoelastic when analyzing micropipette aspiration experiments. This work suggests that indenting cells with sharp tips but neglecting the presence of surface tension leads to an effective elastic modulus whose origin is in fact surface tension. Accordingly, using sharp tips when microindenting a cell is a good way to directly measure its surface tension without the need to let the viscoelastic modulus relax.

Embryonic aortic arch material properties obtained by optical coherence tomography-guided micropipette aspiration

It is challenging to determine the in vivo material properties of a very soft, mesoscale arterial vesselsof size ∼ 80 to 120 μm diameter. This information is essential to understand the early embryonic cardiovascular development featuring rapidly evolving dynamic microstructure. Previous research efforts to describe the properties of the embryonic great vessels are very limited. Our objective is to measure the local material properties of pharyngeal aortic arch tissue of the chick-embryo during the early Hamburger-Hamilton (HH) stages, HH18 and HH24. Integrating the micropipette aspiration technique with optical coherence tomography (OCT) imaging, a clear vision of the aspirated arch geometry is achieved for an inner pipette radius of Rp = 25 μm. The aspiration of this region is performed through a calibrated negatively pressurized micro-pipette. A computational finite element model is developed to model the nonlinear behaviour of the arch structure by considering the geometry-dependent constraints. Numerical estimations of the nonlinear material parameters for aortic arch samples are presented. The exponential material nonlinearity parameter (a) of aortic arch tissue increases statistically significantly from a = 0.068 ± 0.013 at HH18 to a = 0.260 ± 0.014 at HH24 (p = 0.0286). As such, the aspirated tissue length decreases from 53 μm at HH18 to 34 μm at HH24. The calculated NeoHookean shear modulus increases from 51 Pa at HH18 to 93 Pa at HH24 which indicates a statistically significant stiffness increase. These changes are due to the dynamic changes of collagen and elastin content in the media layer of the vessel during development.

Simple yet effective methods to probe hydrogel stiffness for mechanobiology

In spite of tremendous advances made in the comprehension of mechanotransduction, implementation of mechanobiology assays remains challenging for the broad community of cell biologists. Hydrogel substrates with tunable stiffness are essential tool in mechanobiology, allowing to investigate the effects of mechanical signals on cell behavior. A bottleneck that slows down the popularization of hydrogel formulations for mechanobiology is the assessment of their stiffness, typically requiring expensive and sophisticated methodologies in the domain of material science. Here we overcome such barriers offering the reader protocols to set-up and interpret two straightforward, low cost and high-throughput tools to measure hydrogel stiffness: static macroindentation and micropipette aspiration. We advanced on how to build up these tools and on the underlying theoretical modeling. Specifically, we validated our tools by comparing them with leading techniques used for measuring hydrogel stiffness (atomic force microscopy, uniaxial compression and rheometric analysis) with consistent results on PAA hydrogels or their modification. In so doing, we also took advantage of YAP/TAZ nuclear localization as biologically validated and sensitive readers of mechanosensing, all in all presenting a suite of biologically and theoretically proven protocols to be implemented in most biological laboratories to approach mechanobiology.

Recent Advances on the Model, Measurement Technique, and Application of Single Cell Mechanics

Since the cell was discovered by humans, it has been an important research subject for researchers. The mechanical response of cells to external stimuli and the biomechanical response inside cells are of great significance for maintaining the life activities of cells. These biomechanical behaviors have wide applications in the fields of disease research and micromanipulation. In order to study the mechanical behavior of single cells, various cell mechanics models have been proposed. In addition, the measurement technologies of single cells have been greatly developed. These models, combined with experimental techniques, can effectively explain the biomechanical behavior and reaction mechanism of cells. In this review, we first introduce the basic concept and biomechanical background of cells, then summarize the research progress of internal force models and experimental techniques in the field of cell mechanics and discuss the latest mechanical models and experimental methods. We summarize the application directions of cell mechanics and put forward the future perspectives of a cell mechanics model.

Zona pellucida shear modulus, a possible novel non-invasive method to assist in embryo selection during in-vitro fertilization treatment

The present study investigated the association between oocyte zona pellucida shear modulus (ZPSM) and implantation rate (IR). Ninety-three oocytes collected from 38 in-vitro fertilization patients who underwent intracytoplasmic sperm injection were included in this case–control study. The ZP was modeled as an isotropic compressible hyperelastic material with parameter \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C_{10}$$\end{document}C10, which represents the ZPSM. Computational methodology was used to calculate the mechanical parameters that govern ZP deformation. Fifty-one developed embryos were transferred and divided into two groups—implanted and not implanted. Multivariate logistic regression analysis was performed to identify the association between ZPSM and IR while controlling for confounders. Maternal age and number of embryos per transfer were significantly associated with implantation. The IR of embryos characterized by \documentclass[12pt]{minimal} \usepackage{amsmath} \usepackage{wasysym} \usepackage{amsfonts} \usepackage{amssymb} \usepackage{amsbsy} \usepackage{mathrsfs} \usepackage{upgreek} \setlength{\oddsidemargin}{-69pt} \begin{document}$$C_{10}$$\end{document}C10 values in the range of 0.20–0.40 kPa was 66.75%, while outside this range it was 6.70%. This range was significantly associated with implantation (p < 0.001). Geometric properties were not associated with implantation. Multivariate logistic regression analysis that controlled for relevant confounders indicated that this range was independently associated with implantation (adjusted OR 38.03, 95% confidence interval 4.67–309.36, p = 0.001). The present study suggests that ZPSM may improve the classic embryo selection process with the aim of increasing IR.