Hopping frequency influences elastic energy reuse with joint series elastic actuators

Role of compliant mechanics and motor control in hopping - from human to robot

Compliant leg function found during bouncy gaits in humans and animals can be considered a role model for designing and controlling bioinspired robots and assistive devices. The human musculoskeletal design and control differ from distal to proximal joints in the leg. The specific mechanical properties of different leg parts could simplify motor control, e.g., by taking advantage of passive body dynamics. This control embodiment is complemented by neural reflex circuitries shaping human motor control. This study investigates the contribution of specific passive and active properties at different leg joint levels in human hopping at different hopping frequencies. We analyze the kinematics and kinetics of human leg joints to design and control a bioinspired hopping robot. In addition, this robot is used as a test rig to validate the identified concepts from human hopping. We found that the more distal the joint, the higher the possibility of benefit from passive compliant leg structures. A passive elastic element nicely describes the ankle joint function. In contrast, a more significant contribution to energy management using an active element (e.g., by feedback control) is predicted for the knee and hip joints. The ankle and knee joints are the key contributors to adjusting hopping frequency. Humans can speed up hopping by increasing ankle stiffness and tuning corresponding knee control parameters. We found that the force-modulated compliance (FMC) as an abstract reflex-based control beside a fixed spring can predict human knee torque-angle patterns at different frequencies. These developed bioinspired models for ankle and knee joints were applied to design and control the EPA-hopper-II robot. The experimental results support our biomechanical findings while indicating potential robot improvements. Based on the proposed model and the robot's experimental results, passive compliant elements (e.g. tendons) have a larger capacity to contribute to the distal joint function compared to proximal joints. With the use of more compliant elements in the distal joint, a larger contribution to managing energy changes is observed in the upper joints.

Design of Low-Cost Modular Bio-Inspired Electric-Pneumatic Actuator (EPA)-Driven Legged Robots

Exploring the fundamental mechanisms of locomotion extends beyond mere simulation and modeling. It necessitates the utilization of physical test benches to validate hypotheses regarding real-world applications of locomotion. This study introduces cost-effective modular robotic platforms designed specifically for investigating the intricacies of locomotion and control strategies. Expanding upon our prior research in electric-pneumatic actuation (EPA), we present the mechanical and electrical designs of the latest developments in the EPA robot series. These include EPA Jumper, a human-sized segmented monoped robot, and its extension EPA Walker, a human-sized bipedal robot. Both replicate the human weight and inertia distributions, featuring co-actuation through electrical motors and pneumatic artificial muscles. These low-cost modular platforms, with considerations for degrees of freedom and redundant actuation, (1) provide opportunities to study different locomotor subfunctions-stance, swing, and balance; (2) help investigate the role of actuation schemes in tasks such as hopping and walking; and (3) allow testing hypotheses regarding biological locomotors in real-world physical test benches.

Exploring the effects of serial and parallel elasticity on a hopping robot

The interaction between the motor control and the morphological design of the human leg is critical for generating efficient and robust locomotion. In this paper, we focus on exploring the effects of the serial and parallel elasticity on hopping with a two-segmented robotic leg called electric-pneumatic actuation (EPA)-Hopper. EPA-Hopper uses a hybrid actuation system that combines electric motors and pneumatic artificial muscles (PAM). It provides direct access to adjust the physical compliance of the actuation system by tuning PAM pressures. We evaluate the role of the serial and parallel PAMs with different levels of compliance with respect to four criteria: efficiency, performance, stability, and robustness of hopping against perturbations. The results show that the serial PAM has a more pronounced impact than the parallel PAM on these criteria. Increasing the stiffness of the serial PAM decreases the leg stiffness of the unloading phase during hopping. The stiffer the leg, the more efficient and the less robust the movement. These findings can help us further understand the human hopping mechanism and support the design and control of legged robots and assistive devices.

Construction and Simulation of Biomechanical Model of Human Hip Joint Muscle-Tendon Assisted by Elastic External Tendon by Hill Muscle Model

Based on the Hill muscle model (HMM), a biomechanical model of human hip muscle tendon assisted by elastic external tendon (EET) was preliminarily established to investigate and analyze the biomechanical transition between the hip joint (HJ) and related muscle tendons. Using the HMM, the optimal muscle fiber length and muscle force scaling variables were introduced by means of constrained optimization problems and were optimized. The optimized HMM was constructed with human parameters of 170 cm and 70 kg. The biomechanical model simulation test of the hip muscle tendon was performed in the automatic dynamic analysis of mechanical systems (ADAMS) software to analyze and optimize the changes in the root mean square error (RMSE), biological moment, muscle moment distribution coefficient (MDC), muscle moment, muscle force, muscle power, and mechanical work of the activation curves of the hip major muscle, iliopsoas muscle, rectus femoris muscle, and hamstring muscle under analyzing the optimized HMM and under different EET auxiliary stiffnesses from the joint moment level, joint level, and muscle level, respectively. It was found that the trends of the output joint moment of the optimized HMM and the biological moment of the human HJ were basically the same, r 2 = 0.883 and RMSE = 0.18 Nm/kg, and the average metabolizable energy consumption of the HJ was (243.77 ± 1.59) J. In the range of 35%∼65% of gait cycle (GC), the auxiliary moment showed a significant downward trend with the increase of EET stiffness, when the EET stiffness of the human body was less than 200 Nm/rad, the biological moment of the human HJ gradually decreased with the increase of EET stiffness, and the MDC of the iliopsoas and hamstring muscles gradually decreased; when the EET stiffness was greater than 200 Nm/rad, the increase of the total moment of the extensor muscles significantly increased, the MDC of the gluteus maximus and rectus muscles gradually increased, and the gluteus maximus and hamstring muscle moments and muscle forces gradually increased; the results show that the optimized muscle model based on Hill can reflect the law of human movement and complete the simulation test of HJ movements, which provides a new idea for the analysis of energy migration in the musculoskeletal system of the lower limb.