Taxonomic characterization and metabolic analysis of the Halomonas sp. KM-1, a highly bioplastic poly(3-hydroxybutyrate)-producing bacterium

Halomonas as a chassis

With the rapid development of systems and synthetic biology, the non-model bacteria, Halomonas spp., have been developed recently to become a cost-competitive platform for producing a variety of products including polyesters, chemicals and proteins owing to their contamination resistance and ability of high cell density growth at alkaline pH and high salt concentration. These salt-loving microbes can partially solve the challenges of current industrial biotechnology (CIB) which requires high energy-consuming sterilization to prevent contamination as CIB is based on traditional chassis, typically, Escherichia coli, Bacillus subtilis, Pseudomonas putida and Corynebacterium glutamicum. The advantages and current status of Halomonas spp. including their molecular biology and metabolic engineering approaches as well as their applications are reviewed here. Moreover, a systematic strain engineering streamline, including product-based host development, genetic parts mining, static and dynamic optimization of modularized pathways and bioprocess-inspired cell engineering are summarized. All of these developments result in the term called next-generation industrial biotechnology (NGIB). Increasing efforts are made to develop their versatile cell factories powered by synthetic biology to demonstrate a new biomanufacturing strategy under open and continuous processes with significant cost-reduction on process complexity, energy, substrates and fresh water consumption.

Efficient production and secretion of oxaloacetate from Halomonas sp. KM-1 under aerobic conditions

The alkaliphilic, halophilic bacterium Halomonas sp. KM-1 can utilize glucose for the intracellular storage of the bioplastic poly-(R)-3-hydroxybutyric acid (PHB) and extracellular secretion of pyruvate under aerobic conditions. In this study, we investigated the effects of sodium chloride concentration on PHB accumulation and pyruvate secretion in the KM-1 strain and, unexpectedly, observed that oxaloacetate, an important intermediate chemical in the TCA cycle, glycogenesis, and aspartic acid biosynthesis, was secreted. We then further analyzed oxaloacetate productivity after changing the sodium chloride additive concentration, additive time-shift, and culture temperature. In 42-h batch-cultivation experiments, we found that wild-type Halomonas sp. KM-1 secreted 39.0 g/L oxaloacetate at a rate of 0.93 g/(L h). The halophilic bacteria Halomonas has already gained attention for industrial chemical-production processes owing to its unique properties, such as contamination-free culture conditions and a tolerance for high substrate concentrations. Moreover, no commercial scale oxaloacetate production was previously reported to result from bacterial fermentation. Oxaloacetate is an important intermediate chemical in biosynthesis and is used as a health food based on its role in energy synthesis. Thus, these data provided important insights into the production of oxaloacetate and other derivative chemicals using this strain.

Fed-Batch Strategies for Production of PHA Using a Native Isolate of Halomonas venusta KT832796 Strain

In this study, polyhydroxyalkanoates (PHA) accumulation by Halomonas venusta KT832796, a moderate halophilic bacteria isolated from marine source was studied. Both nutritional requirements and process parameters for submerged cultivation of the organism in bioreactor have been standardized. From the shake flask studies, glucose and ammonium citrate as carbon and nitrogen source produced maximum PHA at a ratio 20 with 3.52 g/L of dry cell weight and 70.56% of PHA content. However, ammonium sulfate as the nitrogen source was found to be more suitable for fed-batch cultivation. Several feeding strategies including pH-based fed-batch and variants of pulse feeding were studied to improve the PHA levels. pH-based feeding, although improved PHA level to 26 g/L, most of the carbon flux was diverted towards biomass formation; hence, the percent PHA was only 39.15% of the dry cell weight. Maximum PHA of 33.4 g/L, which corresponded to 88.12% of the dry cell, was obtained from high concentration single pulse method. There was a net 8.65-fold increase in PHA using this feeding strategy when compared to batch studies. According to our knowledge, this is the highest amount of PHA reported for a Halomonas venusta strain.

The novel oleaginous bacterium Sphingomonas sp. EGY1 DSM 29616: a value added platform for renewable biodiesel

Oleaginous microorganisms are regarded as efficient, renewable cell factories for lipid biosynthesis, a biodiesel precursor, to overwhelm the cosmopolitan energy crisis with affordable investment capital costs. Present research highlights production and characterization of lipids by a newly isolated oleaginous bacterium, Sphingomonas sp. EGY1 DSM 29616 through an eco-friendly approach. Only sweet whey [42.1% (v/v)] in tap water was efficiently used as a growth medium and lipid production medium to encourage cell growth and trigger lipid accumulation simultaneously. Cultivation of Sphingomonas sp. EGY1 DSM 29616 in shake flasks resulted in the accumulation of 8.5 g L^-1 lipids inside the cells after 36 h at 30 °C. Triglycerides of C16:C18 saturated and unsaturated fatty acids showed a similar pattern to tripalmitin or triolein; deduced from gas chromatography (GC), thin layer chromatography (TLC), and Matrix-assisted laser desorption/ionization time-of-flight-mass spectra analysis (MALDI-TOF-MS) analyses. Batch cultivation 2.5 L in a laboratory scale fermenter led to 13.8 g L^-1 accumulated lipids after 34 h at 30 °C. Present data would underpin the potential of Sphingomonas sp. EGY1 DSM 29616 as a novel renewable cell factory for biosynthesis of biodiesel.

Efficient production and secretion of pyruvate from Halomonas sp. KM-1 under aerobic conditions

The alkaliphilic, halophilic bacterium Halomonas sp. KM-1 can utilize both hexose and pentose sugars for the intracellular storage of bioplastic poly-(R)-3-hydroxybutyric acid (PHB) under aerobic conditions. In this study, we investigated the effects of the sodium nitrate concentration on PHB accumulation in the KM-1 strain. Unexpectedly, we observed the secretion of pyruvate, a central intermediate in carbon- and energy-metabolism processes in all organisms; therefore, pyruvate is widely used as a starting material in the industrial biosynthesis of pharmaceuticals and is employed for the production of crop-protection agents, polymers, cosmetics, and food additives. We then further analyzed pyruvate productivity following changes in culture temperature and the buffer concentration. In 48-h batch-cultivation experiments, we found that wild-type Halomonas sp. KM-1 secreted 63.3 g/L pyruvate at a rate of 1.32 g/(L·h), comparable to the results of former studies using mutant and recombinant microorganisms. Thus, these data provided important insights into the production of pyruvate using this novel strain.

Halophiles, coming stars for industrial biotechnology

Industrial biotechnology aims to produce chemicals, materials and biofuels to ease the challenges of shortage on petroleum. However, due to the disadvantages of bioprocesses including energy consuming sterilization, high fresh water consumption, discontinuous fermentation to avoid microbial contamination, highly expensive stainless steel fermentation facilities and competing substrates for human consumption, industrial biotechnology is less competitive compared with chemical processes. Recently, halophiles have shown promises to overcome these shortcomings. Due to their unique halophilic properties, some halophiles are able to grow in high pH and high NaCl containing medium under higher temperature, allowing fermentation processes to run contamination free under unsterile conditions and continuous way. At the same time, genetic manipulation methods have been developed for halophiles. So far, halophiles have been used to produce bioplastics polyhydroxyalkanoates (PHA), ectoines, enzymes, and bio-surfactants. Increasing effects have been made to develop halophiles into a low cost platform for bioprocessing with advantages of low energy, less fresh water consumption, low fixed capital investment, and continuous production.

Draft genome sequence of Halomonas sp. strain KM-1, a moderately halophilic bacterium that produces the bioplastic poly(3-hydroxybutyrate)

We report the draft genome sequence of Halomonas sp. strain KM-1, which was isolated in Ikeda City, Osaka, Japan, and which produces the bioplastic poly(3-hydroxybutyrate). The total length of the assembled genome is 4,992,811 bp, and 4,220 coding sequences were predicted within the genome. Genes encoding proteins that are involved in the production and depolymerization of poly(3-hydroxybutyrate) were identified. The identification of these genes might be of use in the production of the bioplastic poly(3-hydroxybutyrate) and its monomer 3-hydroxybutyrate.

Efficient secreted production of (R)-3-hydroxybutyric acid from living Halomonas sp. KM-1 under successive aerobic and microaerobic conditions

Production of (R)-3-hydroxybutyric acid [(R)-3-HB] by strain Halomonas sp. KM-1 under successive aeration conditions was investigated. The first aerobic condition allowed both cell growth and intracellular storage of poly-(R)-3-hydroxybutyric acid (PHB). The second microaerobic condition, achieved by reducing the culture agitation rate, lead to the degradation of PHB to (R)-3-HB. The amount of PHB stored in KM-1 cells after 48-h cultivation under aerobic conditions was 16.4 g/l. In contrast, after a shift from aerobic to microaerobic conditions and a further 18-h cultivation, PHB content in KM-1 cells decreased to 0.9 g/l. Numerous intracellular PHB-containing granules were observed in cells under aerobic conditions by electron microscopy. After the shift to microaerobic conditions, the number and size of granules were significantly reduced, in agreement with the degradation of prestored PHB. On the other hand, under microaerobic conditions, the concentration of (R)-3-HB in the medium reached a maximum of 15.2 g/l, indicating the production and extracellular secretion of (R)-3-HB as a result of PHB digestion. Notably, cell lysis was not observed during the successive aeration conditions as assessed by elution of genomic DNA to the culture supernatant, cell morphology observed by electron microscopy and counts of colony formation. In this simple system utilizing a change of aeration during cultivation of strain Halomonas sp. KM-1, we obtained one of the highest levels of microbiological production of (R)-3-HB reported to date.