Influence of shaking culture on the biological functions of cell aggregates incorporating gelatin hydrogel microspheres

Culturing Osteochondral Explants Under Rotary Shaking or After Removing Bone Marrow Elements Increases Explant Cellular Viability

BACKGROUND

Reduced viability in the deepest zones of osteochondral allografts (OCAs) can weaken the subchondral interface, potentially increasing the risk of failure. This reduction may result from nutritional imbalances due to uneven media distribution or interference from bone marrow elements.

PURPOSE

To investigate whether culturing OCAs using a rotary shaker or removing the bone marrow elements would increase graft cellular viability.

STUDY DESIGN

Controlled laboratory study.

METHODS

Bovine osteochondral explants were stored for 28 days at 4°C under 3 different conditions (n = 6 explants per group): static (control group), rotary shaker at 150 rpm (shaker group), and static after removal of bone marrow elements using a Waterpik device (Waterpik group). Chondrocyte viability was assessed using live/dead staining across the entire tissue and in each zone (superficial, middle, deep). Subchondral bone viability was assessed using TUNEL (terminal deoxynucleotidal transferase-mediated biotin-deoxyuridine triphosphate nick-end labeling) staining to detect apoptotic cells.

RESULTS

Both shaker (64.2%; P = .010) and Waterpik (65.6%; P = .005) conditions showed significantly higher chondrocyte viability compared with control (49.8%). When samples were analyzed by zone, the shaker and Waterpik groups displayed higher cellular viability at the middle zone (shaker = 60.6%, P < .001; Waterpik = 56.1%, P < .001) and deep zone (shaker = 63.1%, P = .018; Waterpik = 61.5%, P = .025) than the control group (25.6% at middle zone; 32.8% at deep zone). Additionally, shaker (56.7%; P = .018) and Waterpik (51.4%; P = .007) groups demonstrated a lower percentage of apoptotic cells in subchondral bone compared with control (88.0%). No significant differences were observed between the shaker and Waterpik groups in any of the analyses.

CONCLUSION

Both rotary shaking and removal of bone marrow elements during storage of osteochondral explants led to higher chondrocyte viability at the middle and deep zones of the graft compared with the static storage condition. Enhancing nutrition delivery to the graft could improve its quality, potentially improving outcomes of OCA transplantation.

CLINICAL RELEVANCE

The use of a rotary shaker or the removal of bone marrow elements may significantly improve the culture conditions, increasing graft viability and integrity after OCA storage.

Characterization of a Delivery System Based on a Hyaluronic Acid 3D Scaffold and Gelatin Microparticles

The objective of this study was to develop and characterize a novel hyaluronic acid (HA) 3D scaffold integrated with gelatin microparticles for sustained-delivery applications. To achieve this goal, the delivery microparticles were synthesized and thoroughly characterized, focusing on their crosslinking mechanisms (vanillin and genipin), degradation profiles, and release kinetics. Additionally, the cytotoxicity of the system was assessed, and its impact on the cell adhesion and distribution using mouse fibroblasts was examined. The combination of both biomaterials offers a novel platform for the gradual release of various factors encapsulated within the microparticles while simultaneously providing cell protection, support, and controlled factor dispersion due to the HA 3D scaffold matrix. Hence, this system offers a platform for addressing injure repair by continuously releasing specific encapsulated factors for optimal tissue regeneration. Additionally, by leveraging the properties of HA conjugates with small drug molecules, we can enhance the solubility, targeting capabilities, and cellular absorption, as well as prolong the system stability and half-life. As a result, this integrated approach presents a versatile strategy for therapeutic interventions aimed at promoting tissue repair and regeneration.

Human Mesenchymal Stem Cells on Size-Sorted Gelatin Hydrogel Microparticles Show Enhanced In Vitro Wound Healing Activities

The demand for innovative therapeutic interventions to expedite wound healing, particularly in vulnerable populations such as aging and diabetic patients, has prompted the exploration of novel strategies. Mesenchymal stem cell (MSC)-based therapy emerges as a promising avenue for treating acute and chronic wounds. However, its clinical application faces persistent challenges, notably the low survivability and limited retention time of engraftment in wound environments. Addressing this, a strategy to sustain the viability and functionality of human MSCs (hMSCs) in a graft-able format has been identified as crucial for advanced wound care. Hydrogel microparticles (HMPs) emerge as promising entities in the field of wound healing, showcasing versatile capabilities in delivering both cells and bioactive molecules/drugs. In this study, gelatin HMPs (GelMPs) were synthesized via an optimized mild processing method. GelMPs with distinct diameter sizes were sorted and characterized. The growth of hMSCs on GelMPs with various sizes was evaluated. The release of wound healing promoting factors from hMSCs cultured on different GelMPs were assessed using scratch wound assays and gene expression analysis. GelMPs with a size smaller than 100 microns supported better cell growth and cell migration compared to larger sizes (100 microns or 200 microns). While encapsulation of hMSCs in hydrogels has been a common route for delivering viable hMSCs, we hypothesized that hMSCs cultured on GelMPs are more robust than those encapsulated in hydrogels. To test this hypothesis, hMSCs were cultured on GelMPs or in the cross-linked methacrylated gelatin hydrogel (GelMA). Comparative analysis of growth and wound healing effects revealed that hMSCs cultured on GelMPs exhibited higher viability and released more wound healing activities in vitro. This observation highlights the potential of GelMPs, especially those with a size smaller than 100 microns, as a promising carrier for delivering hMSCs in wound healing applications, providing valuable insights for the optimization of advanced therapeutic strategies.

Gelatin microsphere-alginate hydrogel combined system for sustained and gastric targeted delivery of 5-fluorouracil

In the current study, novel gelatin microspheres/methacrylated alginate hydrogel combined system (5-FU-GELms/Alg-MA) was developed for gastric targeted delivery of 5-fluorouracil as an anticancer agent. While water-in-oil emulsification method was used for the production of 5-FU-GELms, Alg-MA was synthesized through methacrylation reaction occurred by epoxide ring-opening mechanism. Then, 5-FU-GELms/Alg-MA hydrogel system was fabricated by the encapsulation of 5-FU-GELms into Alg-MA hydrogel network via UV-crosslinking. To evaluate applicability of fabricated 5-FU-GELms/Alg-MA as gastric targeted drug delivery vehicle, both swelling and in vitro drug release experiments were carried out at pH 1.2 medium resembling gastric fluid. Compared to drug release directly from 5-FU-GELms, 5-FU-GELms/Alg-MA hydrogel system showed more controlled and sustained drug release profile with lower amount of cumulative release starting from early stages, since hydrogel matrix created a barrier to the diffusion of 5-FU included in microspheres. Drug release kinetic results obtained by applying various kinetic models to release data showed that the mechanism of 5-FU release from 5-FU-GELms/Alg-MA hydrogel system is controlled by Fickian diffusion. All results revealed that 5-FU-GELms/Alg-MA hydrogel integrated system could be potentially utilized as gastric targeted drug carrier to enhance therapeutic efficacy and reduce systemic side effects in gastric cancer treatments for future studies.

Exploring the Three-Dimensional Frontier: Advancements in MSC Spheroids and Their Implications for Breast Cancer and Personalized Regenerative Therapies

To more accurately replicate the in vivo three-dimensional (3D) mesenchymal stem cell (MSC) niche and enhance cellular phenotypes for superior in vivo treatments, MSC functionalization through in vitro 3D culture approaches has gained attention. The organization of MSCs in 3D spheroids results in altered cell shape, cytoskeleton rearrangement, and polarization. Investigations have revealed that the survival and secretory capability of MSCs are positively impacted by moderate hypoxia within the inner zones of MSC spheroids. The spheroid hypoxic microenvironment enhances the production of angiogenic and anti-apoptotic molecules, including HGF, VEGF, and FGF-2. Furthermore, it upregulates the expression of hypoxia-adaptive molecules such as CXCL12 and HIF-1, inhibiting MSC death. The current review focuses on the latest developments in fundamental and translational research concerning three-dimensional MSC systems. This emphasis extends to the primary benefits and potential applications of MSC spheroids, particularly in the context of breast cancer and customized regenerative therapies.

Fabrication of a Low-Cost Microfluidic Device for High-Throughput Drug Testing on Static and Dynamic Cancer Spheroid Culture Models

Drug development is a complex and expensive process from new drug discovery to product approval. Most drug screening and testing rely on in vitro 2D cell culture models; however, they generally lack in vivo tissue microarchitecture and physiological functionality. Therefore, many researchers have used engineering methods, such as microfluidic devices, to culture 3D cells in dynamic conditions. In this study, a simple and low-cost microfluidic device was fabricated using Poly Methyl Methacrylate (PMMA), a widely available material, and the total cost of the completed device was USD 17.75. Dynamic and static cell culture examinations were applied to monitor the growth of 3D cells. α-MG-loaded GA liposomes were used as the drug to test cell viability in 3D cancer spheroids. Two cell culture conditions (i.e., static and dynamic) were also used in drug testing to simulate the effect of flow on drug cytotoxicity. Results from all assays showed that with the velocity of 0.005 mL/min, cell viability was significantly impaired to nearly 30% after 72 h in a dynamic culture. This device is expected to improve in vitro testing models, reduce and eliminate unsuitable compounds, and select more accurate combinations for in vivo testing.

Whole-Cell Biocatalytic Production of Acetoin with an aldC-Overexpressing Lactococcus lactis Using Soybean as Substrate

Douchi is a traditional Chinese fermented soybean product, in which acetoin is a key flavor substance. Here, the α-acetolactate decarboxylase gene aldC was cloned from Lactiplantibacillus (L.) plantarum and overexpressed in Lactococcus (L.) lactis NZ9000 by nisin induction. The ALDC crude enzyme solution produced an enzyme activity of 35.16 mU. Next, whole cells of the recombinant strain NZ9000/pNZ8048-aldC were employed as the catalyst to produce acetoin in GM17 medium. An optimization experiment showed that an initial OD₆₀₀ of 0.6, initial pH of 7.5, nisin concentration of 20 ng/mL, induction temperature of 37 °C and static induction for 8 h were the optimal induction conditions, generating the maximum acetoin production (106.93 mg/L). Finally, after incubation under the optimal induction conditions, NZ9000/pNZ8048-aldC was used for whole-cell biocatalytic acetoin production, using soybean as the substrate. The maximum acetoin yield was 79.43 mg/L. To our knowledge, this is the first study in which the aldC gene is overexpressed in L. lactis and whole cells of the recombinant L. lactis are used as a biocatalyst to produce acetoin in soybean. Thus, our study provides a theoretical basis for the preparation of fermented foods containing high levels of acetoin and the biosynthesis of acetoin in food materials.

Bile duct regeneration with an artificial bile duct made of gelatin hydrogel non-woven fabrics

Although choledochojejunostomy is the standard technique for biliary reconstruction, there are various associated problems that need to be solved such as reflux cholangitis. Interposition with an artificial bile duct (ABD) to replace the resected bile duct maintains a physiological conduit for bile and may solve this problem. This study investigated the usefulness of an ABD made of gelatin hydrogel non-woven fabric (GHNF). GHNF was prepared by the solution blow spinning method. The migration and activity of murine fibroblast L929 cells were examined in GHNF sheets. L929 cells migrated into GHNF sheets, where they proliferated and synthesized collagen, suggesting GHNF is a promising scaffold for bile duct regeneration. ABDs made of GHNF were implanted in place of resected bile duct segments in rats. The rats were sacrificed at 2, 6, and 12 weeks post-implantation. The implantation site was histologically evaluated for bile duct regeneration. At postoperative 2 weeks, migrating cells were observed in the ABD pores. The implanted ABD was mostly degraded and replaced by collagen fibers at 6 weeks. Ki67-positive bile duct epithelial cells appeared within the implanted ABD. These were most abundant within the central part of the ABD after 6 weeks. The percentages of Ki67-positive cells were 31.7%±9.1% in the experimental group and 0.8%±0.6% in the sham operation group at 6 weeks (p<0.05), indicating that mature biliary epithelial cells at the stump proliferated to regenerate the biliary epithelium. Biliary epithelial cells had almost completely covered the bile duct lumen at 12 weeks (epithelialization ratios: 10.4%±6.9% at 2 weeks, 93.1%±5.1% at 6 weeks, 99.2%±1.6% at 12 weeks). The regenerated epithelium was positive for the bile duct epithelium marker cytokeratin 19. Bile duct regeneration was accompanied by angiogenesis, as evidenced by the appearance of CD31-positive vascular structures. Capillaries were induced 2 weeks after implantation. The number of capillaries reached a maximum at 6 weeks and decreased to the same level as that of normal bile ducts at 12 weeks. These results showed that an ABD of GHNF contributed to successful bile duct regeneration in rats by facilitating the cell migration required for extracellular matrix synthesis, angiogenesis, and epithelialization.

Immunosuppressive mesenchymal stem cells aggregates incorporating hydrogel microspheres promote an in vitro invasion of cancer cells

Introduction

The objective of this study is to design a co-culture system of cancer cells and three-dimensional (3D) mesenchymal stem cells (MSC) aggregates for the in vitro evaluation of cancer invasion.

Methods

First, the MSC of an immunosuppressive phenotype (MSC2) were prepared by the MSC stimulation of polyriboinosinic polyribocytidylic acid. By simple mixing MSC2 and gelatin hydrogel microspheres (GM) in a U-bottomed well of 96 well plates which had been pre-coated with poly (vinyl alcohol), 3D MSC2 aggregates incorporating GM were obtained. The amount of chemokine (C–C motif) ligand 5 (CCL5) secreted from the MSC2 aggregates incorporating GM. Finally, an invasion assay was performed to evaluate the cancer invasion rate by co-cultured cancer cells and the 3D MSC2 incorporating GM.

Results

The amount of CCL5 secreted for the 3D MSC2 aggregates incorporating GM was significantly higher than that of two-dimensional (2D) MSC, 2D MSC2, and 3D MSC aggregates incorporating GM. When MDA-MB-231 human breast cancer cells were co-cultured with the 3D MSC2 aggregates incorporating GM, the invasion rate of cancer cells was significantly high compared with that of 2D MSC or 2D MSC2 and 3D MSC aggregates incorporating GM. In addition, high secretion of matrix metalloproteinase-2 was observed for the 3D MSC2 aggregates/cancer cells system.

Conclusions

It is concluded that the co-culture system of 3D MSC2 aggregates incorporating GM and cancer cells is promising to evaluate the invasion of cancer cells in vitro.

•

This invasion model is an important tool for anti-cancer drug screening.

•

Mesenchymal stem cells of an immunosuppressive phenotype (MSC2) were obtained.

•

3D MSC2 aggregates incorporating gelatin hydrogel microspheres were prepared.

•

3D MSC2 aggregates promoted the invasion rate of cancer cells.

Construction of Hybrid Cell Spheroids Using Cell-Sized Cross-Linked Nanogel Microspheres as an Artificial Extracellular Matrix

The introduction of functional material supports or spacers into cell spheroids increases the free volume, allowing oxygen, nutrients, and waste products to diffuse in and out more freely. Here, a biocompatible polysaccharide spacer material was investigated. Microspheres were prepared by cross-linking cholesterol-modified pullulan (CHP) nanogels with poly(ethylene glycol) (PEG). The ratio of modified CHP nanogel to PEG cross-linker was optimized to give uniform microspheres with an average diameter of approximately 14 μm. Rhodamine B-labeled microspheres showed a homogeneous assembly with bone marrow-derived mesenchymal stem cells (1:1 ratio) to create hybrid cell spheroids. The addition of the cross-linked nanogel spacers did not affect the cell viability, indicating that the microspheres provided a biocompatible scaffold that supported cell proliferation. In addition, the microspheres were stable under culture conditions over 14 days. The hybrid cell spheroids were scaled up to millimeter size to demonstrate their potential as a transplantable treatment, and the cells were found to maintain their high viability. The hybrid cell spheroids are expected to support the production of organoids.

Strategies Using Gelatin Microparticles for Regenerative Therapy and Drug Screening Applications

Gelatin, a denatured form of collagen, is an attractive biomaterial for biotechnology. In particular, gelatin particles have been noted due to their attractive properties as drug carriers. The drug release from gelatin particles can be easily controlled by the crosslinking degree of gelatin molecule, responding to the purpose of the research. The gelatin particles capable of drug release are effective in wound healing, drug screening models. For example, a sustained release of growth factors for tissue regeneration at the injured sites can heal a wound. In the case of the drug screening model, a tissue-like model composed of cells with high activity by the sustained release of drug or growth factor provides reliable results of drug effects. Gelatin particles are effective in drug delivery and the culture of spheroids or cell sheets because the particles prevent hypoxia-derived cell death. This review introduces recent research on gelatin microparticles-based strategies for regenerative therapy and drug screening models.

Efficient cell transplantation combining injectable hydrogels with control release of growth factors

Introduction

The objective of this study is to investigate the effect of gelatin microspheres incorporating growth factors on the therapeutic efficacy in cell transplantation. The strength of this study is to combine gelatin hydrogel microspheres incorporating basic fibroblast growth factor and platelet growth factor mixture (GM/GF) with bioabsorbable injectable hydrogels (iGel) for transplantation of adipose-derived stem cells (ASCs).

Methods

The rats ASCs suspended in various solutions were transplanted in masseter muscle. Rats were euthanized 2, 7, 14 days after injection for measurement of the number of ASCs retention in the muscle and morphological evaluation of muscle fibers and the inflammation of the injected tissue by histologic and immunofluorescent stain.

Results

Following the injection into the skeletal muscle, the GM/GF allowed the growth factors to release at the injection site over one week. When ASCs were transplanted into skeletal muscle using iGel incorporating GM/GF (iGel+GM/GF), the number of cells grafted was significantly high compared with other control groups. Moreover, for the groups to which GM/GF was added, the cells transplanted survived, and the Myo-D expression of a myoblast marker was observed at the region of cells transplanted.

Conclusions

The growth factors released for a long time likely enhance the proliferative and differentiative capacity of cells. The simple combination with iGel and GM/GF allowed ASCs to enhance their survival at the injected site and consequently achieve improved therapeutic efficacy in cell transplantation.

•

The rats adipose-derived stem cells (ASCs) suspended in various solutions were transplanted in masseter muscle.

•

The number of cells transplanted using this study's technology was significantly high compared with other control groups.

•

For the groups with growth factors, the Myo-D (myoblast marker) expression was observed at the region of cells transplanted.

Biomaterial-Assisted Regenerative Medicine

This review aims to show case recent regenerative medicine based on biomaterial technologies. Regenerative medicine has arousing substantial interest throughout the world, with “The enhancement of cell activity” one of the essential concepts for the development of regenerative medicine. For example, drug research on drug screening is an important field of regenerative medicine, with the purpose of efficient evaluation of drug effects. It is crucial to enhance cell activity in the body for drug research because the difference in cell condition between in vitro and in vivo leads to a gap in drug evaluation. Biomaterial technology is essential for the further development of regenerative medicine because biomaterials effectively support cell culture or cell transplantation with high cell viability or activity. For example, biomaterial-based cell culture and drug screening could obtain information similar to preclinical or clinical studies. In the case of in vivo studies, biomaterials can assist cell activity, such as natural healing potential, leading to efficient tissue repair of damaged tissue. Therefore, regenerative medicine combined with biomaterials has been noted. For the research of biomaterial-based regenerative medicine, the research objective of regenerative medicine should link to the properties of the biomaterial used in the study. This review introduces regenerative medicine with biomaterial.

Progress of gelatin-based microspheres (GMSs) as delivery vehicles of drug and cell

Gelatin has various attractive features as biomedical materials, for instance, biocompatibility, low immunogenicity, biodegradability, and ease of manipulation. In recent years, various gelatin-based microspheres (GMSs) have been fabricated with innovative technologies to serve as sustained delivery vehicles of drugs and genetic materials as well as beneficial bacteria. Moreover, GMSs have exhibited promising potentials to act as both cell carriers and 3D scaffold components in tissue engineering and regenerative medicine, which not only exhibit excellent injectability but also could be integrated into a macroscale construct with the laden cells. Herein, we aim to thoroughly summarize the recent progress in the preparations and biomedical applications of GMSs and then to point out the research direction in future. First, various methods for the fabrication of GMSs will be described. Second, the recent use of GMSs in tumor embolization and in the delivery of cells, drugs, and genetic material as well as bacteria will be presented. Finally, several key factors that may enhance the improvement of GMSs were suggested as delivery vehicles.

Three-Dimensional Culture System of Cancer Cells Combined with Biomaterials for Drug Screening

Simple Summary

For the research and development of drug discovery, it is of prime importance to construct the three-dimensional (3D) tissue models in vitro. To this end, the enhancement design of cell function and activity by making use of biomaterials is essential. In this review, 3D culture systems of cancer cells combined with several biomaterials for anticancer drug screening are introduced.

Abstract

Anticancer drug screening is one of the most important research and development processes to develop new drugs for cancer treatment. However, there is a problem resulting in gaps between the in vitro drug screening and preclinical or clinical study. This is mainly because the condition of cancer cell culture is quite different from that in vivo. As a trial to mimic the in vivo cancer environment, there has been some research on a three-dimensional (3D) culture system by making use of biomaterials. The 3D culture technologies enable us to give cancer cells an in vitro environment close to the in vivo condition. Cancer cells modified to replicate the in vivo cancer environment will promote the biological research or drug discovery of cancers. This review introduces the in vitro research of 3D cell culture systems with biomaterials in addition to a brief summary of the cancer environment.

Shaking culture enhances chondrogenic differentiation of mouse induced pluripotent stem cell constructs

Mechanical loading on articular cartilage induces various mechanical stresses and strains. In vitro hydrodynamic forces such as compression, shear and tension impact various cellular properties including chondrogenic differentiation, leading us to hypothesize that shaking culture might affect the chondrogenic induction of induced pluripotent stem cell (iPSC) constructs. Three-dimensional mouse iPSC constructs were fabricated in a day using U-bottom 96-well plates, and were subjected to preliminary chondrogenic induction for 3 days in static condition, followed by chondrogenic induction culture using a see-saw shaker for 17 days. After 21 days, chondrogenically induced iPSC (CI-iPSC) constructs contained chondrocyte-like cells with abundant ECM components. Shaking culture significantly promoted cell aggregation, and induced significantly higher expression of chondrogenic-related marker genes than static culture at day 21. Immunohistochemical analysis also revealed higher chondrogenic protein expression. Furthemore, in the shaking groups, CI-iPSCs showed upregulation of TGF-β and Wnt signaling-related genes, which are known to play an important role in regulating cartilage development. These results suggest that shaking culture activates TGF-β expression and Wnt signaling to promote chondrogenic differentiation in mouse iPSCs in vitro. Shaking culture, a simple and convenient approach, could provide a promising strategy for iPSC-based cartilage bioengineering for study of disease mechanisms and new therapies.

A Co-Culture System of Three-Dimensional Tumor-Associated Macrophages and Three-Dimensional Cancer-Associated Fibroblasts Combined with Biomolecule Release for Cancer Cell Migration

The objective of this study is to design a cancer invasion model by making use of cancer-associated fibroblasts (CAF) or tumor-associated macrophages (TAM) and gelatin hydrogel microspheres (GM) for the sustained release of drugs. The GM containing adenosine (A) (GM-A) were prepared and cultured with TAM to obtain three-dimensional (3D) TAM aggregates incorporating GM-A (3D TAM-GM-A). The GM-A incorporation enabled TAM to enhance the secretion level of vascular endothelial growth factor. When co-cultured with HepG2 liver cancer cells in an invasion assay, the 3D TAM-GM-A promoted the invasion rate of cancer cells. In addition, the E-cadherin expression level decreased to a significantly greater extent compared with that co-cultured with TAM aggregates incorporating GM, whereas the significantly higher expression of N-cadherin and Vimentin was observed. This indicates that the epithelial-mesenchymal transition event was induced. The GM containing transforming growth factor-β1 (TGF-β1) were prepared to incorporate into 3D CAF (3D CAF-GM-TGF-β1). Following a co-culture of mixed 3D CAF-GM-TGF-β1 and 3D TAM-GM-A and every HepG2, MCF-7 breast cancer cell, or WA-hT lung cancer cell, the invasion rate of every cancer cell enhanced depending on the mixing ratio of 3D TAM-GM-A and 3D CAF-GM-TGF-β1. The amount of matrix metalloproteinase-2 (MMP-2) secreted also enhanced, and the enhancement was well corresponded with that of cancer cell invasion rate. The higher MMP secretion assists the breakdown of basement membrane, leading to the higher rate of cancer cell invasion. This model is a promising 3D culture system to evaluate the invasion ability of various cancer cells in vitro. Impact statement This study proposes a cell culture system to enhance the tumor-associated macrophage function based on the combination of three-dimensional (3D) cell aggregates and gelatin hydrogel microspheres (GM) for adenosine delivery. An additional combination of 3D cancer-associated fibroblasts incorporating GM containing transforming growth factor-β1 allowed cancer cells to enhance their invasion rate. This co-culture system is promising to evaluate the ability of cancer cell invasion for anticancer drug screening.

Visualization of Human Induced Pluripotent Stem Cells-Derived Three-Dimensional Cartilage Tissue by Gelatin Nanospheres

Recently, many studies on the three-dimensional (3D) fabrication of cells have been performed. Under these circumstances, it is indispensable to develop the imaging technologies and methodologies for noninvasive visualization of 3D cells fabricated. The objective of this study is to develop the labeling method of human induced pluripotent stem (iPS) cells-derived 3D cartilage tissue with gelatin nanospheres coincorporating three kinds of quantum dots (QD) and iron oxide nanoparticles (IONP) (GNS_QD+IONP). In this study, two labeling methods were performed. One is that a cartilage tissue was labeled directly by incubating with octaarginine (R8)-treated GNS_QD+IONP (direct labeling method). The other one is a "dissociation and labeling method." First, the cartilage tissue was dissociated to cells in a single dispersed state. Then, the cells were incubated with R8-GNS_QD+IONP in a monolayer culture. Finally, the cells labeled were fabricated to 3D pellets or cell sheets. By the direct labeling method, only cells residing in the surrounding site of cartilage tissue were labeled. On the contrary, the 3D cartilage pellets and the cell sheets were homogenously labeled and maintained fluorescently visualized over 4 weeks. In addition, the cartilage properties were histologically detected even after the process of dissociation and labeling. Homogenous labeling and visualization of human iPS cells-derived 3D cartilage tissue was achieved by the dissociation and labeling method with GNS_QD+IONP. Impact statement The homogenous labeling and visualization of human iPS cells-derived three-dimensional (3D) cartilage tissue was achieved over 4 weeks by the dissociation and labeling method with gelatin nanospheres coincorporating quantum dots (QD) and iron oxide nanoparticles (IONP) (GNS_QD+IONP). The cartilage properties of cells treated were maintained. It is concluded that the dissociation and labeling method with GNS_QD+IONP is a promising to visualize the human iPS cells-derived 3D cartilage tissue.

A cancer invasion model of cancer-associated fibroblasts aggregates combined with TGF-β1 release system

Introduction

The objective of this study is to design a cancer invasion model where the cancer invasion rate can be regulated in vitro.

Methods

Cancer-associated fibroblasts (CAF) aggregates incorporating gelatin hydrogel microspheres (GM) containing various concentrations of transforming growth factor-β1 (TGF-β1) (CAF-GM-TGF-β1) were prepared. Alpha-smooth muscle actin (α-SMA) for the CAF aggregates was measured to investigate the CAF activation level by changing the concentration of TGF-β1. An invasion assay was performed to evaluate the cancer invasion rate by co-cultured of cancer cells with various CAF-GM-TGF-β1.

Results

The expression level of α-SMA for CAF increased with an increased in the TGF-β1 concentration. When co-cultured with various types of CAF-GM-TGF-β1, the cancer invasion rate was well correlated with the α-SMA level. It is conceivable that the TGF-β1 concentration could modify the level of CAF activation, leading to the invasion rate of cancer cells. In addition, at the high concentrations of TGF-β1, the effect of a matrix metalloproteinase (MMP) inhibitor on the cancer invasion rate was observed. The higher invasion rate would be achieved through the higher MMP production.

Conclusions

The present model is promising to realize the cancer invasion whose rate can be modified by changing the TGF-β1 concentration.

•

This invasion model would be a promising tool for anti-cancer drug screening.

•

TGF-β1 was controlled release from gelatin hydrogel microspheres.

•

CAF were activated by increased TGF-β1 concentration.

•

There was a good correlation between invasion rate and TGF-β1 concentration.

•

Higher invasion rate would be achieved through matrix metalloproteinase production.