Prevention of LLC-PK1 cell overgrowth in a bioartificial renal tubule device using a MEK inhibitor, U0126

Development of a living membrane comprising a functional human renal proximal tubule cell monolayer on polyethersulfone polymeric membrane

The need for improved renal replacement therapies has stimulated innovative research for the development of a cell-based renal assist device. A key requirement for such a device is the formation of a "living membrane", consisting of a tight kidney cell monolayer with preserved functional organic ion transporters on a suitable artificial membrane surface. In this work, we applied a unique conditionally immortalized proximal tubule epithelial cell (ciPTEC) line with an optimized coating strategy on polyethersulfone (PES) membranes to develop a living membrane with a functional proximal tubule epithelial cell layer. PES membranes were coated with combinations of 3,4-dihydroxy-l-phenylalanine and human collagen IV (Coll IV). The optimal coating time and concentrations were determined to achieve retention of vital blood components while preserving high water transport and optimal ciPTEC adhesion. The ciPTEC monolayers obtained were examined through immunocytochemistry to detect zona occludens 1 tight junction proteins. Reproducible monolayers were formed when using a combination of 2 mg ml(-1) 3,4-dihydroxy-l-phenylalanine (4 min coating, 1h dissolution) and 25 μg ml(-1) Coll IV (4 min coating). The successful transport of (14)C-creatinine through the developed living membrane system was used as an indication for organic cation transporter functionality. The addition of metformin or cimetidine significantly reduced the creatinine transepithelial flux, indicating active creatinine uptake in ciPTECs, most likely mediated by the organic cation transporter, OCT2 (SLC22A2). In conclusion, this study shows the successful development of a living membrane consisting of a reproducible ciPTEC monolayer on PES membranes, an important step towards the development of a bioartificial kidney.

The performance of primary human renal cells in hollow fiber bioreactors for bioartificial kidneys

Bioartificial kidneys (BAKs) containing human primary renal proximal tubule cells (HPTCs) have been applied in clinical trials. The results were encouraging, but also showed that more research is required. Animal cells or cell lines are not suitable for clinical applications, but have been mainly used in studies on BAK development as large numbers of such cells could be easily obtained. It is difficult to predict HPTC performance based on data obtained with other cell types. To enable more extensive studies on HPTCs, we have developed a bioreactor containing single hollow fiber membranes that requires relatively small amounts of cells. Special hollow fiber membranes with the skin layer on the outer surface and consisting of polyethersulfone/polyvinylpyrrolidone were developed. The results suggested that such hollow fiber membranes were more suitable for the bioreactor unit of BAKs than membranes with an inner skin layer. An HPTC-compatible double coating was applied to the insides of the hollow fiber membranes, which sustained the formation of functional epithelia under bioreactor conditions. Nevertheless, the state of differentiation of the primary human cells remained a critical issue and should be further addressed. The bioreactor system described here will facilitate further studies on the relevant human cell type.

Development of bioartificial renal tubule devices with lifespan-extended human renal proximal tubular epithelial cells

BACKGROUND

The bioartificial renal tubule device is a cell therapy system for renal failure. The major obstacle in the development of the bioartificial renal tubule device is the obtainment of a large number of viable renal tubule cells to seed on the inner surface of hollow fibers. Although our previous studies had used a transformed cell line, they may be dangerous for clinical uses. Therefore, different approaches to amplify renal proximal tubular epithelial cells (RPTEC) in culture without oncogenes, vectors and carcinogens have been required.

METHODS

The limitation of the replicative lifespan of human RPTEC, which is ∼12 population doublings (PDs), was extended by invalidating messenger RNA of cell cycle-related genes with antisense oligonucleotide or small interfering RNA (siRNA).

RESULTS

Periodic transfection of siRNA to a tumor suppressor p53 or a cyclin-dependent kinase inhibitor p16(INK4a) extended the lifespan by 33 and 63 PDs, respectively, in 3 months of culture. The siRNA-mediated lifespan extension was controllable because cell division ceased within 2 weeks after the transfection was discontinued. Expressions of γ-glutamyltransferase 1 and glucose transporter 1 were recovered in siRNA-transfected RPTEC cultured on porous membranes. Bioartificial renal tubule devices (0.8 m(2)) constructed with these cells showed reabsorption of water (122.3 ± 4.2 mL/30 min), sodium (18.1 ± 0.7 mEq/30 min) and glucose (121.7 ± 4.4 mg/30 min) after 1 week of circulation. Furthermore, β2-microglobulin and pentosidine were metabolized by RPTEC in mini-devices (65 cm(2)) within 48 h of circulation.

CONCLUSIONS

These approaches enabled us to yield a high enough number of RPTEC for construction of bioartificial renal tubule devices repeatedly. Lifespan-extended RPTEC could recover their specific characteristics by culturing on porous membranes, and bioartificial renal tubule devices constructed with these cells showed good performances of reabsorption and metabolism.

SUMMARY

A large number of human renal tubular cells required for construction of the bioartificial renal tubule device were prepared by extending the lifespan of the primary cells by invalidating mRNA of cell cycle-related genes. Constructed bioartificial renal tubule devices with lifespan-extended cells showed good performances of in vitro examination of reabsorption and metabolism. Requiring no oncogenes, vectors or cell cloning, the RNAi-mediated lifespan extension can help advance tissue-replacement therapy as well as basic research.

Present status and future perspectives on the development of bioartificial kidneys for the treatment of acute and chronic renal failure patients

A bioartificial renal tubule device (BTD) consisting of a hollow-fiber module and human proximal tubular epithelial cells has been completed technically by Humes and colleagues and a few other groups. Humes and colleagues developed BTD, treated acute kidney injury patients with multiorgan failure by continuous hemofiltration (CHF) in conjunction with BTD, and reported a significantly higher survival rate than that by CHF with BTD without cells in the Food and Drug Administration phase IIa trial. However, BTD has never been approved by the US Government, as the CHF+BTD treatment did not show a significant difference from the control group in the phase IIb trial. Human proximal tubular epithelial cells were confirmed to be overgrown on artificial membrane, which resulted in the inhibition of active transports and the metabolism of essential substances. Function of the BTD could be maintained in a U0126-contained medium, even if the BTD had to have been waited by a new acute kidney injury patient for several weeks. For wearable kidneys, heparin-covalently bound membrane or methacryloyloxyethyl phosphorylcholine (MPC) polymer-coated membranes are candidates for antithrombogenic hemofilters, while endothelial progenitor cells from a cord blood, CD133(+) cells-attached hemofilter in which the permeability of the cells was enhanced by the enlarged diameter of fenestrae by treating with cytochalasin B are another candidate. The MPC blend membrane containing 1% of the MPC polymer in polysulfone was developed as a BTD module. MPC was 7 times larger at the sponge layer than at the skin layer of the membrane, resulting in hemocompatibility at the sponge layer and cytocompatibility at the skin layer.

Achievements and challenges in bioartificial kidney development

Bioartificial kidneys (BAKs) combine a conventional hemofilter in series with a bioreactor unit containing renal epithelial cells. The epithelial cells derived from the renal tubule should provide transport, metabolic, endocrinologic and immunomodulatory functions. Currently, primary human renal proximal tubule cells are most relevant for clinical applications. However, the use of human primary cells is associated with many obstacles, and the development of alternatives and an unlimited cell source is one of the most urgent challenges. BAKs have been applied in Phase I/II and Phase II clinical trials for the treatment of critically ill patients with acute renal failure. Significant effects on cytokine concentrations and long-term survival were observed. A subsequent Phase IIb clinical trial was discontinued after an interim analysis, and these results showed that further intense research on BAK-based therapies for acute renal failure was required. Development of BAK-based therapies for the treatment of patients suffering from end-stage renal disease is even more challenging, and related problems and research approaches are discussed herein, along with the development of mobile, portable, wearable and implantable devices.

Generation of easily accessible human kidney tubules on two-dimensional surfaces in vitro

The generation of tissue-like structures in vitro is of major interest for various fields of research including in vitro toxicology, regenerative therapies and tissue engineering. Usually 3D matrices are used to engineer tissue-like structures in vitro, and for the generation of kidney tubules, 3D gels are employed. Kidney tubules embedded within 3D gels are difficult to access for manipulations and imaging. Here we show how large and functional human kidney tubules can be generated in vitro on 2D surfaces, without the use of 3D matrices. The mechanism used by human primary renal proximal tubule cells for tubulogenesis on 2D surfaces appears to be distinct from the mechanism employed in 3D gels, and tubulogenesis on 2D surfaces involves interactions between epithelial and mesenchymal cells. The process is induced by transforming growth factor-β₁, and enhanced by a 3D substrate architecture. However, after triggering the process, the formation of renal tubules occurs with remarkable independence from the substrate architecture. Human proximal tubules generated on 2D surfaces typically have a length of several millimetres, and are easily accessible for manipulations and imaging, which makes them attractive for basic research and in vitro nephrotoxicology. The experimental system described also allows for in vitro studies on how primary human kidney cells regenerate renal structures after organ disruption. The finding that human kidney cells organize tissue-like structures independently from the substrate architecture has important consequences for kidney tissue engineering, and it will be important, for instance, to inhibit the process of tubulogenesis on 2D surfaces in bioartificial kidneys.