Novel genes retrieved from environmental DNA by polymerase chain reaction: current genome-walking techniques for future metagenome applications

Single primer site-specific nested PCR for accurate and rapid genome-walking

Genome-walking is a molecular tool used to unveil uncharacterized DNA regions flanking a known DNA, which has been widely used in bioscience and related areas. This study developed a reliable and efficient PCR-based genome-walking approach, named as single primer site-specific nested PCR (SPN-PCR). A SPN-PCR set sequentially consists of three single-primer nested PCR amplifications. The primary relaxed thermal cycle promotes outmost nested site-specific primer (NSSP) to partially combine with numerous places on DNA template, synthesizing many single-stranded DNAs (ssDNA). Among them, the target ssDNA is exponentially amplified in the subsequent stringent cycles, as its 3' part possesses the outmost NSSP complement; but a non-target ssDNA cannot be amplified, because it does not possess such a complement. Stringent secondary and tertiary PCRs also exclusively enrich this target DNA. Finally, the target DNA product becomes predominant. The feasibility of SPN-PCR was validated by genome-walking several selected genes from two divergent species.

Primer extension refractory PCR: an efficient and reliable genome walking method

Genome walking, a molecular technique for obtaining unknown flanking genomic sequences from a known genomic sequence, has been broadly applied to determine transgenic sites, mine new genetic resources, and fill in chromosomal gaps. This technique has advanced genomics, genetics, and related disciplines. Here, an efficient and reliable genome walking technique, called primer extension refractory PCR (PER-PCR), is presented. PER-PCR uses a set of primary, secondary, and tertiary walking primers. The middle 15 nt of the primary walking primer overlaps with the 3' parts of the secondary and tertiary primers. The 5' parts of the three primers are heterologous to each other. The short overlap allows the walking primer to anneal to its predecessor only in a relaxed-stringency PCR cycle, resulting in a series of single-stranded DNAs; however, the heterologous 5' part prevents the creation of a perfect binding site for the walking primer. In the next stringent cycle, the target single strand can be extended into a double-stranded DNA molecule by the sequence-specific primer and thus can be exponentially amplified by the remaining stringent cycles. The nontarget single strand fails to be enriched due to the lack of a perfect binding site for any primer. PER-PCR was validated by extension into unknown flanking regions of the hyg gene in rice and the gadR gene in Levilactobacillus brevis CD0817. In summary, in this study, a new practical PER-PCR method was constructed as a potential alternative to existing genome walking methods.

Mining thermophiles for biotechnologically relevant enzymes: evaluating the potential of European and Caucasian hot springs

The development of sustainable and environmentally friendly industrial processes is becoming very crucial and demanding for the rapid implementation of innovative bio-based technologies. Natural extreme environments harbor the potential for discovering and utilizing highly specific and efficient biocatalysts that are adapted to harsh conditions. This review focuses on extremophilic microorganisms and their enzymes (extremozymes) from various hot springs, shallow marine vents, and other geothermal habitats in Europe and the Caucasus region. These hot environments have been partially investigated and analyzed for microbial diversity and enzymology. Hotspots like Iceland, Italy, and the Azores harbor unique microorganisms, including bacteria and archaea. The latest results demonstrate a great potential for the discovery of new microbial species and unique enzymes that can be explored for the development of Circular Bioeconomy.Different screening approaches have been used to discover enzymes that are active at extremes of temperature (up 120 °C), pH (0.1 to 11), high salt concentration (up to 30%) as well as activity in the presence of solvents (up to 99%). The majority of published enzymes were revealed from bacterial or archaeal isolates by traditional activity-based screening techniques. However, the latest developments in molecular biology, bioinformatics, and genomics have revolutionized life science technologies. Post-genomic era has contributed to the discovery of millions of sequences coding for a huge number of biocatalysts. Both strategies, activity- and sequence-based screening approaches, are complementary and contribute to the discovery of unique enzymes that have not been extensively utilized so far.

Fork PCR: a universal and efficient genome-walking tool

The reported genome-walking methods still suffer from some deficiencies, such as cumbersome experimental steps, short target amplicon, or deep background. Here, a simple and practical fork PCR was proposed for genome-walking. The fork PCR employs a fork primer set of three random oligomers to implement walking task. In primary fork PCR, the low-stringency amplification cycle mediates the random binding of primary fork primer to some places on genome, producing a batch of single-stranded DNAs. In the subsequent high-stringency amplification, the target single-strand is processed into double-strand by the site-specific primer, but a non-target single-stranded DNA cannot be processed by any primer. As a result, only the target DNA can be exponentially amplified in the remaining high-stringency cycles. Secondary/tertiary nested fork PCR(s) further magnifies the amplification difference between the both DNAs by selectively enriching target DNA. The applicability of fork PCR was validated by walking several gene loci. The fork PCR could be a perspective substitution for the existing genome-walking schemes.

Sodium-Ion-Free Fermentative Production of GABA with Levilactobacillus brevis CD0817

Gamma-aminobutyric acid (GABA) has positive effects on many physiological processes. Lactic acid bacterial production of GABA is a future trend. This study aimed to produce a sodium-ion-free GABA fermentation process for Levilactobacillus brevis CD0817. In this fermentation, both the seed and fermentation media used L-glutamic acid instead of monosodium L-glutamate as the substrate. We optimized the key factors influencing GABA formation, adopting Erlenmeyer flask fermentation. The optimized values of the key factors of glucose, yeast extract, Tween 80, manganese ion, and fermentation temperature were 10 g/L, 35 g/L, 1.5 g/L, 0.2 mM, and 30 °C, respectively. Based on the optimized data, a sodium-ion-free GABA fermentation process was developed using a 10-L fermenter. During the fermentation, L-glutamic acid powder was continuously dissolved to supply substrate and to provide the acidic environment essential for GABA synthesis. The current bioprocess accumulated GABA at up to 331 ± 8.3 g/L after 48 h. The productivity of GABA was 6.9 g/L/h and the molar conversion rate of the substrate was 98.1%. These findings demonstrate that the proposed method is promising in the fermentative preparation of GABA by lactic acid bacteria.

Bridging PCR: An Efficient and Reliable Scheme Implemented for Genome-Walking

The efficacy of the available genome-walking methods is restricted by low specificity, high background, or composite operations. We herein conceived bridging PCR, an efficient genome-walking approach. Three primers with random sequences, inner walker primer (IWP), bridging primer (BP), and outer walker primer (OWP), are involved in bridging PCR. The BP is fabricated by splicing OWP to the 5'-end of IWP's 5'-part. A bridging PCR set is constituted by three rounds of amplification reactions, sequentially performed by IWP, BP plus OWP, and OWP, respectively pairing with three nested sequence-specific primers (SSP). A non-target product arising from IWP alone undergoes end-lengthening mediated by BP. This modified non-target product is a preferentially formed hairpin between the lengthened ends, instead of binding with shorter OWP. Meanwhile, a non-target product, triggered by SSP alone or SSP plus IWP, is removed by nested SSP. As a result, only the target DNA is accumulated. The efficacy of bridging PCR was validated by walking the gadA/R genes of Levilactobacillus brevis CD0817 and the hyg gene of rice.

Semi-Site-Specific Primer PCR: A Simple but Reliable Genome-Walking Tool

Genome-walking has been frequently applied to molecular biology and related areas. Herein, a simple but reliable genome-walking technique, termed semi-site-specific primer PCR (3SP-PCR), is presented. The key to 3SP-PCR is the use of a semi-site-specific primer in secondary PCR that partially overlaps its corresponding primary site-specific primer. A 3SP-PCR set comprises two rounds of nested amplification reactions. In each round of reaction, any primer is allowed to partially anneal to the DNA template once only in the single relaxed-stringency cycle, creating a pool of single-stranded DNAs. The target single-stranded DNA can be converted into a double-stranded molecule directed by the site-specific primer, and thus can be exponentially amplified by the subsequent high-stringency cycles. The non-target one cannot be converted into a double-strand due to the lack of a perfect binding site to any primer, and thus fails to be amplified. We validated the 3SP-PCR method by using it to probe the unknown DNA regions of rice hygromycin genes and Levilactobacillus brevis CD0817 glutamic acid decarboxylase genes.

Fusion primer driven racket PCR: A novel tool for genome walking

The limitations of the current genome-walking strategies include strong background and cumbersome experimental processes. Herein, we report a genome-walking method, fusion primer-driven racket PCR (FPR-PCR), for the reliable retrieval of unknown flanking DNA sequences. Four sequence-specific primers (SSP1, SSP2, SSP3, and SSP4) were sequentially selected from known DNA (5'→3′) to perform FPR-PCR. SSP3 is the fragment that mediates intra-strand annealing (FISA). The FISA fragment is attached to the 5′ end of SSP1, generating a fusion primer. FPR-PCR comprises two rounds of amplification reactions. The single-fusion primary FPR-PCR begins with the selective synthesis of the target first strand, then allows the primer to partially anneal to some place(s) on the unknown region of this strand, producing the target second strand. Afterward, a new first strand is synthesized using the second strand as the template. The 3′ end of this new first strand undergoes intra-strand annealing to the FISA site, followed by the formation of a racket-like DNA by a loop-back extension. This racket-like DNA is exponentially amplified in the secondary FPR-PCR performed using SSP2 and SSP4. We validated this FPR-PCR method by identifying the unknown flanks of Lactobacillus brevis CD0817 glutamic acid decarboxylase genes and the rice hygromycin gene.

Wristwatch PCR: A Versatile and Efficient Genome Walking Strategy

Genome walking is a method used to retrieve unknown flanking DNA. Here, we reported wristwatch (WW) PCR, an efficient genome walking technique mediated by WW primers (WWPs). WWPs feature 5′- and 3′-overlap and a heterologous interval. Therefore, a wristwatch-like structure can be formed between WWPs under relatively low temperatures. Each WW-PCR set is composed of three nested (primary, secondary, and tertiary) PCRs individually performed by three WWPs. The WWP is arbitrarily annealed somewhere on the genome in the one low-stringency cycle of the primary PCR, or directionally to the previous WWP site in one reduced-stringency cycle of the secondary/tertiary PCR, producing a pool of single-stranded DNAs (ssDNAs). A target ssDNA incorporates a gene-specific primer (GSP) complementary at the 3′-end and the WWP at the 5′-end and thus can be exponentially amplified in the next high-stringency cycles. Nevertheless, a non-target ssDNA cannot be amplified as it lacks a perfect binding site for any primers. The practicability of the WW-PCR was validated by successfully accessing unknown regions flanking Lactobacillus brevis CD0817 glutamate decarboxylase gene and the hygromycin gene of rice. The WW-PCR is an attractive alternative to the existing genome walking techniques.

Current Status of Mining, Modification, and Application of Cellulases in Bioactive Substance Extraction

Cellulases have been used to extract bioactive ingredients from medical plants; however, the poor enzymatic properties of current cellulases significantly limit their application. Two strategies are expected to address this concern: (1) new cellulase gene mining strategies have been promoted, optimized, and integrated, thanks to the improvement of gene sequencing, genomic data, and algorithm optimization, and (2) known cellulases are being modified, thanks to the development of protein engineering, crystal structure data, and computing power. Here, we focus on mining strategies and provide a systemic overview of two approaches based on sequencing and function. Strategies based on protein structure modification, such as introducing disulfide bonds, proline, salt bridges, N-glycosylation modification, and truncation of loop structures, have already been summarized. This review discusses four aspects of cellulase-assisted extraction. Initially, cellulase alone was used to extract bioactive substances, and later, mixed enzyme systems were developed. Physical methods such as ultrasound, microwave, and high hydrostatic pressure have assisted in improving extraction efficiency. Cellulase changes the structure of biomolecules during the extraction process to convert them into effective ingredients with better activity and bioavailability. The combination of cellulase with other enzymes and physical technologies is a promising strategy for future extraction applications.

Bacterial exopolysaccharides: Chemical structures, gene clusters and genetic engineering

In recent decades, the composition, structure, biosynthesis, and function of bacterial extracellular polysaccharides (EPS) have been extensively studied. EPS are synthesized through different biosynthetic pathways. The genes responsible for EPS synthesis are usually clustered on the genome or large plasmids of bacteria. Generally, different EPS synthesis gene clusters direct the synthesis of EPS with different chemical structures and biological activities. A better understanding of the gene functions involved in EPS biosynthesis is critical for the production of EPS with special biological activities. Genetic engineering methods are usually used to study EPS synthesis related genes. This review organizes the available information on EPS, including their structures, synthesis of related genes, and highlights the research progress of modifying EPS gene clusters through gene-editing methods.

Characteristics of microbial community of soil subjected to industrial production of antibiotics

Ecosystems worldwide are exposed to pollutants connected to the industrial production of pharmaceuticals. The objective of this study was to study the composition and characteristics of the soil microbial communities that had been exposed to long-term selection pressure caused by the industrial production of penicillin G. Soil samples from four sites among the penicillin G production plant were analysed using 16S rRNA profiling via Illumina MiSeq platform and were compared with the control samples from four sites outside the plant. Total metagenomic DNA from the impacted soil was also used for the preparation of E. coli T1R-based fosmid library which was consequently qualitatively tested for the presence of penicillin G acylase (PGA)-encoding genes using the method of sequence homology. Analyses of alpha diversity revealed that the long-term antibiotic presence in the soil significantly increased the microbial diversity and richness in terms of Shannon diversity index (p = 0.002) and Chao estimates (p = 0.004). Principal component analysis showed that the two types of communities (on-site and control) could be separated at the phylum, class and genus level. The on-site soil was enriched in Betaproteobacteria, Deltaproteobacteria, Gemmatimonadetes, Acidobacteria and Planctomycetia, while a significant decrease in Actinobacteria was observed. Metagenomic fosmid library revealed high hit rates in identifying PGAs (14 different genes identified) and confirmed the biotechnological potential of soils impacted by anthropogenic activity. This study offers new insights into the changes in microbial communities of soils exposed to anthropogenic activity as well as indicates that those soils may represent a hotspot for biotechnologically interesting targets.

Microbial resolution of whole genome shotgun and 16S amplicon metagenomic sequencing using publicly available NEON data

Microorganisms are ubiquitous in the biosphere, playing a crucial role in both biogeochemistry of the planet and human health. However, identifying these microorganisms and defining their function are challenging. Widely used approaches in comparative metagenomics, 16S amplicon sequencing and whole genome shotgun sequencing (WGS), have provided access to DNA sequencing analysis to identify microorganisms and evaluate diversity and abundance in various environments. However, advances in parallel high-throughput DNA sequencing in the past decade have introduced major hurdles, namely standardization of methods, data storage, reproducible interoperability of results, and data sharing. The National Ecological Observatory Network (NEON), established by the National Science Foundation, enables all researchers to address queries on a regional to continental scale around a variety of environmental challenges and provide high-quality, integrated, and standardized data from field sites across the U.S. As the amount of metagenomic data continues to grow, standardized procedures that allow results across projects to be assessed and compared is becoming increasingly important in the field of metagenomics. We demonstrate the feasibility of using publicly available NEON soil metagenomic sequencing datasets in combination with open access Metagenomics Rapid Annotation using the Subsystem Technology (MG-RAST) server to illustrate advantages of WGS compared to 16S amplicon sequencing. Four WGS and four 16S amplicon sequence datasets, from surface soil samples prepared by NEON investigators, were selected for comparison, using standardized protocols collected at the same locations in Colorado between April-July 2014. The dominant bacterial phyla detected across samples agreed between sequencing methodologies. However, WGS yielded greater microbial resolution, increased accuracy, and allowed identification of more genera of bacteria, archaea, viruses, and eukaryota, and putative functional genes that would have gone undetected using 16S amplicon sequencing. NEON open data will be useful for future studies characterizing and quantifying complex ecological processes associated with changing aquatic and terrestrial ecosystems.

Diversity of tryptophan halogenases in sponges of the genus Aplysina

Marine sponges are a prolific source of novel enzymes with promising biotechnological potential. Especially halogenases, which are key enzymes in the biosynthesis of brominated and chlorinated secondary metabolites, possess interesting properties towards the production of pharmaceuticals that are often halogenated. In this study we used a polymerase chain reaction (PCR)-based screening to simultaneously examine and compare the richness and diversity of putative tryptophan halogenase protein sequences and bacterial community structures of six Aplysina species from the Mediterranean and Caribbean seas. At the phylum level, bacterial community composition was similar amongst all investigated species and predominated by Actinobacteria, Chloroflexi, Cyanobacteria, Gemmatimonadetes, and Proteobacteria. We detected four phylogenetically diverse clades of putative tryptophan halogenase protein sequences, which were only distantly related to previously reported halogenases. The Mediterranean species Aplysina aerophoba harbored unique halogenase sequences, of which the most predominant was related to a sponge-associated Psychrobacter-derived sequence. In contrast, the Caribbean species shared numerous novel halogenase sequence variants and exhibited a highly similar bacterial community composition at the operational taxonomic unit (OTU) level. Correlations of relative abundances of halogenases with those of bacterial taxa suggest that prominent sponge symbiotic bacteria, including Chloroflexi and Actinobacteria, are putative producers of the detected enzymes and may thus contribute to the chemical defense of their host.

Recombinant production and characterization of a novel esterase from a hypersaline lake, Acıgöl, by metagenomic approach

The aim of this study was to isolate a novel esterase from a hypersaline lake by sequence-based metagenomics. The metagenomic DNA was isolated from the enriched hypersaline lake sediment. Degenerate primers targeting the conserved regions of lipolytic enzymes of halophilic microorganisms were used for polymerase chain reaction (PCR) and a whole gene was identified by genome walking. The gene was composed of 783 bp, which corresponds to 260 amino acids with a molecular weight of 28.2 kDa. The deduced amino acid sequence best matched with the esterase from Halomonas gudaonensis with an identity of 91%. Recombinantly expressed enzyme exhibited maximum activity towards pNP-hexanoate with a k_cat value of 12.30 s^-1. The optimum pH and temperature of the enzyme were found as 9 and 30 °C, respectively. The effects of NaCl, solvents, metal ions, detergents and enzyme inhibitors were also studied. In conclusion, a novel enzyme, named as hypersaline lake "Acıgöl" esterase (hAGEst), was identified by sequence-based metagenomics. The high expression level, the ability to maintain activity at cold temperatures and tolerance to DMSO and metal ions are the most outstanding properties of the hAGEst.

Stepwise partially overlapping primer-based PCR for genome walking

A stepwise partially overlapping primer-based PCR (SWPOP-PCR) method for isolating flanking unknown DNA regions was developed, which comprises three rounds of nested PCRs sequentially driven by SWPOP primer-nested specific primer pairs. SWPOP primer set is characterized by a partial overlap of 10 bp with 3′-part of the latter primer is identical to 5′-part of the former one, which makes the SWPOP primer in use anneal to SWPOP site of the prior PCR product only at relatively low temperature. For each PCR, target single-stranded DNA primed by the SWPOP primer in the exclusive one low-stringency cycle is converted into double-stranded form in the following high-stringency cycle due to the presence of a perfect annealing site for the specific primer. This double-stranded DNA bounded by the specific primer and the SWPOP primer is exponentially amplified in the remaining high-stringency cycles. Non-target single-stranded DNA, however, cannot be amplified given the lack of perfect complementary sequences for any primers. Therefore, the partial overlap of a SWPOP primer set preferentially synthesizes target products but inhibits nonspecific amplification. We successfully exploited SWPOP-PCR to obtain the DNA sequences flanking glutamate decarboxylase gene (gadA) locus in Lactobacillus brevis NCL912 and hygromycin gene (hyg) integrated in rice.

Metagenome-derived haloalkane dehalogenases with novel catalytic properties

Haloalkane dehalogenases (HLDs) are environmentally relevant enzymes cleaving a carbon-halogen bond in a wide range of halogenated pollutants. PCR with degenerate primers and genome-walking was used for the retrieval of four HLD-encoding genes from groundwater-derived environmental DNA. Using specific primers and the environmental DNA as a template, we succeeded in generating additional amplicons, resulting altogether in three clusters of sequences with each cluster comprising 8-13 closely related putative HLD-encoding genes. A phylogenetic analysis of the translated genes revealed that three HLDs are members of the HLD-I subfamily, whereas one gene encodes an enzyme from the subfamily HLD-II. Two metagenome-derived HLDs, eHLD-B and eHLD-C, each from a different subfamily, were heterologously produced in active form, purified and characterized in terms of their thermostability, pH and temperature optimum, quaternary structure, substrate specificity towards 30 halogenated compounds, and enantioselectivity. eHLD-B and eHLD-C showed striking differences in their activities, substrate preferences, and tolerance to temperature. Profound differences were also determined in the enantiopreference and enantioselectivity of these enzymes towards selected substrates. Comparing our data with those of known HLDs revealed that eHLD-C exhibits a unique combination of high thermostability, high activity, and an unusually broad pH optimum, which covers the entire range of pH 5.5-8.9. Moreover, a so far unreported high thermostability for HLDs was determined for this enzyme at pH values lower than 6.0. Thus, eHLD-C represents an attractive and novel biocatalyst for biotechnological applications.

PCR in Metagenomics

Metagenomics approach involves direct genetic analysis of environmental samples, evading the tedious culturing process. Polymerase chain reaction is one invaluable tool used for such analyses. Here, we describe one protocol for metagenomic DNA isolation that gives inhibitor-free DNA suitable for PCR and other genetic manipulations. Subsequently, the chapter describes the use of PCR as an indicator of quality of DNA and to amplify a marker of phylogeny. Further, the application of PCR for detection of specific genes and screening of metagenomic libraries is outlined.

Partially overlapping primer-based PCR for genome walking

Current genome walking methods are cumbersome to perform and can result in non-specific products. Here, we demonstrate the use of partially overlapping primer-based PCR (POP-PCR), a direct genome walking technique for the isolation of unknown flanking regions. This method exploits the partially overlapping characteristic at the 3’ ends of a set of POP primers (walking primers), which guarantees that the POP primer only anneals to the POP site of the preceding PCR product at relatively low temperatures. POP primer adaptation priming at the genomic DNA/POP site occurs only once due to one low-/reduced-stringency cycle in each nested PCR, resulting in the synthesis of a pool of single-stranded DNA molecules. Of this pool, the target single-stranded DNA is replicated to the double-stranded form bound by the specific primer and the POP primer in the subsequent high-stringency cycle due to the presence of the specific primer-binding site. The non-target single stranded DNA does not become double stranded due to the absence of a binding site for any of the primers. Therefore, the POP-PCR enriches target DNA while suppressing non-target products. We successfully used POP-PCR to retrieve flanking regions bordering the gadA locus in Lactobacillus brevis NCL912, malQ in Pichia pastoris GS115, the human aldolase A gene, and hyg in rice.

Whole genome amplification approach reveals novel polyhydroxyalkanoate synthases (PhaCs) from Japan Trench and Nankai Trough seawater

Background

Special features of the Japanese ocean include its ranges of latitude and depth. This study is the first to examine the diversity of Class I and II PHA synthases (PhaC) in DNA samples from pelagic seawater taken from the Japan Trench and Nankai Trough from a range of depths from 24 m to 5373 m. PhaC is the key enzyme in microorganisms that determines the types of monomer units that are polymerized into polyhydroxyalkanoate (PHA) and thus affects the physicochemical properties of this thermoplastic polymer. Complete putative PhaC sequences were determined via genome walking, and the activities of newly discovered PhaCs were evaluated in a heterologous host.

Results

A total of 76 putative phaC PCR fragments were amplified from the whole genome amplified seawater DNA. Of these 55 clones contained conserved PhaC domains and were classified into 20 genetic groups depending on their sequence similarity. Eleven genetic groups have undisclosed PhaC activity based on their distinct phylogenetic lineages from known PHA producers. Three complete DNA coding sequences were determined by IAN-PCR, and one PhaC was able to produce poly(3-hydroxybutyrate) in recombinant Cupriavidus necator PHBˉ4 (PHB-negative mutant).

Conclusions

A new functional PhaC that has close identity to Marinobacter sp. was discovered in this study. Phylogenetic classification for all the phaC genes isolated from uncultured bacteria has revealed that seawater and other environmental resources harbor a great diversity of PhaCs with activities that have not yet been investigated. Functional evaluation of these in silico-based PhaCs via genome walking has provided new insights into the polymerizing ability of these enzymes.

Electronic supplementary material

The online version of this article (doi:10.1186/s12866-014-0318-z) contains supplementary material, which is available to authorized users.

Metagenomics and novel gene discovery: promise and potential for novel therapeutics

Metagenomics provides a means of assessing the total genetic pool of all the microbes in a particular environment, in a culture-independent manner. It has revealed unprecedented diversity in microbial community composition, which is further reflected in the encoded functional diversity of the genomes, a large proportion of which consists of novel genes. Herein, we review both sequence-based and functional metagenomic methods to uncover novel genes and outline some of the associated problems of each type of approach, as well as potential solutions. Furthermore, we discuss the potential for metagenomic biotherapeutic discovery, with a particular focus on the human gut microbiome and finally, we outline how the discovery of novel genes may be used to create bioengineered probiotics.

A tailing genome walking method suitable for genomes with high local GC content

The tailing genome walking strategies are simple and efficient. However, they sometimes can be restricted due to the low stringency of homo-oligomeric primers. Here we modified their conventional tailing step by adding polythymidine and polyguanine to the target single-stranded DNA (ssDNA). The tailed ssDNA was then amplified exponentially with a specific primer in the known region and a primer comprising 5' polycytosine and 3' polyadenosine. The successful application of this novel method for identifying integration sites mediated by φC31 integrase in goat genome indicates that the method is more suitable for genomes with high complexity and local GC content.

Genome walking by next generation sequencing approaches

Genome Walking (GW) comprises a number of PCR-based methods for the identification of nucleotide sequences flanking known regions. The different methods have been used for several purposes: from de novo sequencing, useful for the identification of unknown regions, to the characterization of insertion sites for viruses and transposons. In the latter cases Genome Walking methods have been recently boosted by coupling to Next Generation Sequencing technologies. This review will focus on the development of several protocols for the application of Next Generation Sequencing (NGS) technologies to GW, which have been developed in the course of analysis of insertional libraries. These analyses find broad application in protocols for functional genomics and gene therapy. Thanks to the application of NGS technologies, the original vision of GW as a procedure for walking along an unknown genome is now changing into the possibility of observing the parallel marching of hundreds of thousands of primers across the borders of inserted DNA molecules in host genomes.

Overexpression and characterization of a new organic solvent-tolerant esterase derived from soil metagenomic DNA

In this study, an esterase, designated EstC23, was isolated from a soil metagenomic library. The protein was amenable to overexpression in Escherichia coli under control of the T7 promoter, resulting in expression of the active, soluble protein that constituted 30% of the total cell protein content. This enzyme showed optimal activity at 40 °C and retained about 50% maximal activity at 5-10 °C. EstC23 showed remarkable stability in up to 50% (v/v) benzene and alkanes (high logP solvents). When incubated for 7 days in the presence of 50% benzene or alkanes, the enzyme maintained its 2-3 fold elevated activity. The purified enzyme also cleaved sterically hindered esters of tertiary alcohols. These results indicate that EstC23 has potential for use in industrial processes.

Retrieval of glycoside hydrolase family 9 cellulase genes from environmental DNA by metagenomic gene specific multi-primer PCR

A new method, termed metagenomic gene specific multi-primer PCR (MGSM-PCR), is presented that uses multiple gene specific primers derived from an isolated gene from a constructed metagenomic library rather than degenerate primers designed based on a known enzyme family. The utility of MGSM-PCR was shown by applying it to search for homologues of the glycoside hydrolase family 9 cellulase in metagenomic DNA. The success of the multiplex PCR was verified by visualizing products on an agarose gel following gel electrophoresis. A total of 127 homologous genes were amplified with combinatorial multi-primer reactions from 34 soil DNA samples. Multiple alignments revealed extensive sequence diversity among these captured sequences with sequence identity varying from 26 to 99.7%. These results indicated that significantly diverse homologous genes were indeed readily accessible when using multiple metagenomic gene specific primers.

Sequence diversity in haloalkane dehalogenases, as revealed by PCR using family-specific primers

Haloalkane dehalogenases (HLDs) are hydrolytic enzymes that cleave carbon-halogen bonds in various halogenated compounds. Interest initially grew in HLDs as biocatalysts for bioremediation and later for biotransformation applications; each specific HLD within the HLD family has its own substrate specificity, enantioselectivity and product inhibition characteristics. We developed degenerate oligonucleotide primers for HLD-encoding genes and used these to PCR-amplify large hld gene fragments using genomic DNA from the microbial community of a chlorinated-solvent-contaminated aquifer as a template. An analysis of small subunit ribosomal RNA genes revealed a high complexity in the eubacterial population, dominated by α-, β- and γ-Proteobacteria, and Acidobacteria. Using HLD-family-specific primers, we also retrieved transcribed hld homologues from the microbial consortium of this contaminated site. The DNA-derived hld sequences were phylogenetically broadly distributed over both HLD subclasses I and II. Most hld sequences of the environmental RNA data set clustered in three groups within both HLD subclasses, indicating that a considerable proportion of the microbial consortium carrying hld genes was actively involved in haloalkane dehalogenation. The small sequence variation in hld genes and transcripts within each HLD cluster inferred the presence of a substantial pool of highly related HLD genes. The sequence variability appeared to be unevenly distributed over the HLD genes, however, with no apparent preference for a particular protein segment or domain.

Genome walking in eukaryotes

Genome walking is a molecular procedure for the direct identification of nucleotide sequences from purified genomes. The only requirement is the availability of a known nucleotide sequence from which to start. Several genome walking methods have been developed in the last 20 years, with continuous improvements added to the first basic strategies, including the recent coupling with next generation sequencing technologies. This review focuses on the use of genome walking strategies in several aspects of the study of eukaryotic genomes. In a first part, the analysis of the numerous strategies available is reported. The technical aspects involved in genome walking are particularly intriguing, also because they represent the synthesis of the talent, the fantasy and the intelligence of several scientists. Applications in which genome walking can be employed are systematically examined in the second part of the review, showing the large potentiality of this technique, including not only the simple identification of nucleotide sequences but also the analysis of large collections of mutants obtained from the insertion of DNA of viral origin, transposons and transfer DNA (T-DNA) constructs. The enormous amount of data obtained indicates that genome walking, with its large range of applicability, multiplicity of strategies and recent developments, will continue to have much to offer for the rapid identification of unknown sequences in several fields of genomic research.

Cloning of the RNase H genes from a metagenomic DNA library: identification of a new type 1 RNase H without a typical active-site motif

AIMS

The study aimed to combine a metagenomics approach with complementary genetics to identify novel bacterial genes with orthologous functions, with the identification of novel RNase H genes as a test case.

METHODS AND RESULTS

A metagenomic DNA library was prepared from leaf-and-branch compost and used to screen for the RNase H genes by their abilities to complement the temperature-sensitive growth phenotype of the rnhA mutant Escherichia coli strain MIC3001. Determination of the nucleotide sequences of the cloned DNA fragments allowed us to identify 12 different genes encoding type 1 RNases H. Eleven of them encode novel RNases H, which show 40-72% amino acid sequence identities to those available from database. One of them lacks a typical DEDD/E active-site motif, which is almost fully conserved in various RNases H.

CONCLUSIONS

Functional screening of environmental DNA without cultivation of microbes is a useful procedure to isolate novel RNase H genes.

SIGNIFICANCE AND IMPACT OF THE STUDY

One of the identified RNase H genes had no sequence similarity to a previously assumed conserved motif, suggesting multiple catalytic mechanisms exist. This test case illustrates that metagenomics combined with complementary genetics can identify novel genes that are orthologous without sequence similarity to those from cultivated bacteria.

Identification and characterization of a novel fumarase gene by metagenome expression cloning from marine microorganisms

BACKGROUND

Fumarase catalyzes the reversible hydration of fumarate to L-malate and is a key enzyme in the tricarboxylic acid (TCA) cycle and in amino acid metabolism. Fumarase is also used for the industrial production of L-malate from the substrate fumarate. Thermostable and high-activity fumarases from organisms that inhabit extreme environments may have great potential in industry, biotechnology, and basic research. The marine environment is highly complex and considered one of the main reservoirs of microbial diversity on the planet. However, most of the microorganisms are inaccessible in nature and are not easily cultivated in the laboratory. Metagenomic approaches provide a powerful tool to isolate and identify enzymes with novel biocatalytic activities for various biotechnological applications.

RESULTS

A plasmid metagenomic library was constructed from uncultivated marine microorganisms within marine water samples. Through sequence-based screening of the DNA library, a gene encoding a novel fumarase (named FumF) was isolated. Amino acid sequence analysis revealed that the FumF protein shared the greatest homology with Class II fumarate hydratases from Bacteroides sp. 2_1_33B and Parabacteroides distasonis ATCC 8503 (26% identical and 43% similar). The putative fumarase gene was subcloned into pETBlue-2 vector and expressed in E. coli BL21(DE3)pLysS. The recombinant protein was purified to homogeneity. Functional characterization by high performance liquid chromatography confirmed that the recombinant FumF protein catalyzed the hydration of fumarate to form L-malate. The maximum activity for FumF protein occurred at pH 8.5 and 55°C in 5 mM Mg(2+). The enzyme showed higher affinity and catalytic efficiency under optimal reaction conditions: K(m) = 0.48 mM, V(max) = 827 μM/min/mg, and k(cat)/K(m) = 1900 mM/s.

CONCLUSIONS

We isolated a novel fumarase gene, fumF, from a sequence-based screen of a plasmid metagenomic library from uncultivated marine microorganisms. The properties of FumF protein may be ideal for the industrial production of L-malate under higher temperature conditions. The identification of FumF underscores the potential of marine metagenome screening for novel biomolecules.

Use of inverse PCR for analysis of class 1 integrons carrying an unusual 3' conserved segment structure

By using inverse PCR and DNA sequencing, 13 sul3-associated mutational integrons, 2 defective class 1 integrons, and 1 qnrB2-associated complex sul1-type class 1 integrons were identified in Salmonella enterica serovar Choleraesuis, Pseudomonas aeruginosa, and Enterobacter cloacae, respectively. In addition, conjugation and Southern hybridization demonstrated that unusual class 1 integrons were located on plasmids or integrated into chromosomal DNA. Thus, an inverse PCR assay can be a valuable tool for the analysis of unusual structures of the 3' conserved region of class 1 integrons.

Direct and efficient cloning of full-length genes from environmental DNA by RT-qPCR and modified TAIL-PCR

Environmental DNA (eDNA) is defined as the total DNA that can be isolated from environmental samples. In total, therefore, eDNA includes a vast functional genes, and various approaches have been developed to retrieve full-length functional genes from eDNA. The efficiency of PCR amplification of eDNA is limited, however, because in truth, the net content of actual target functional genes is rather low in eDNA. To address this technical challenge, we developed a fast and effective approach to cloning full-length functional genes from eDNA. Two important modifications were made to existing PCR-based methods: first, a real-time quantitative PCR step was added to assess the difficulty of obtaining full-length genes; second, we improved the thermal asymmetric interlaced PCR program to make it more effective for cloning the flanking regions of known fragments that are present at low abundance in eDNA. Using this approach, five novel full-length functional genes with very low identity to known genes were cloned from environmental samples. This approach has great potential for allowing discovery of functional genes from environmental sources and may be broadly applicable to molecular biology research.

Efficient amplification of genes involved in microbial secondary metabolism by an improved genome walking method

Genome walking is a commonly used technique for the identification of DNA sequences adjacent to known regions. Despite the development of various genome walking methods, nonspecific products are often produced in certain circumstances, especially when GC-rich DNA sequences are dealt with. To effectively resolve such technical issues, a simple nested polymerase chain reaction-based genome walking method has been developed by implementing a progressively decreased annealing temperature from 70 degrees C to 47.5 degrees C in the first round of amplification and a high annealing temperature of 65 degrees C in the second round of amplification. During the entire process, a lower ramp rate of 1.5 degrees C s(-1) and cooling rate of 2.5 degrees C s(-1) are performed to reach the annealing temperature. Using this method, we successfully obtained the upstream and downstream sequences of three GC-rich genes involved in the biosynthetic pathways of secondary metabolites from two bacterial genomes. The efficient amplification of DNA target longer than 1.5 Kb with GC content up to 75.0% indicates that the present technique could be a valuable tool for the investigation of biosynthetic pathways of various secondary metabolites.