A critical overview of upstream cultivation and downstream processing of algae-based biofuels: Opportunity, technological barriers and future perspective

Advances in microbial exoenzymes bioengineering for improvement of bioplastics degradation

Plastic pollution has become a major global concern, posing numerous challenges for the environment and wildlife. Most conventional ways of plastics degradation are inefficient and cause great damage to ecosystems. The development of biodegradable plastics offers a promising solution for waste management. These plastics are designed to break down under various conditions, opening up new possibilities to mitigate the negative impact of traditional plastics. Microbes, including bacteria and fungi, play a crucial role in the degradation of bioplastics by producing and secreting extracellular enzymes, such as cutinase, lipases, and proteases. However, these microbial enzymes are sensitive to extreme environmental conditions, such as temperature and acidity, affecting their functions and stability. To address these challenges, scientists have employed protein engineering and immobilization techniques to enhance enzyme stability and predict protein structures. Strategies such as improving enzyme and substrate interaction, increasing enzyme thermostability, reinforcing the bonding between the active site of the enzyme and substrate, and refining enzyme activity are being utilized to boost enzyme immobilization and functionality. Recently, bioengineering through gene cloning and expression in potential microorganisms, has revolutionized the biodegradation of bioplastics. This review aimed to discuss the most recent protein engineering strategies for modifying bioplastic-degrading enzymes in terms of stability and functionality, including enzyme thermostability enhancement, reinforcing the substrate binding to the enzyme active site, refining with other enzymes, and improvement of enzyme surface and substrate action. Additionally, discovered bioplastic-degrading exoenzymes by metagenomics techniques were emphasized.

Microalgal capture of carbon dioxide: A carbon sink or source?

The rapidly evolving global warming is triggering all levels of actions to reduce industrial carbon emissions, while capturing carbon dioxide of industrial origin via microalgae has attracted increasing attention. This article attempted to offer preliminary analysis on the carbon capture potential of microalgal cultivation. It was shown that the energy consumption-associated with operation and nutrient input could significantly contribute to indirect carbon emissions, making the microalgal capture of carbon dioxide much less effective. In fact, the current microalgae processes may not be environmentally sustainable and economically viable in the scenario where the carbon footprints of both upstream and downstream processing are considered. To address these challenging issues, renewable energy (e.g., solar energy) and cheap nutrient source (e.g., municipal wastewater) should be explored to cut off the indirect carbon emissions of microalgae cultivation, meanwhile produced microalgae, without further processing, should be ideally used as biofertilizer or aquafeeds for realizing complete nutrients recycling.

An optimized approach towards bio-capture and carbon dioxide sequestration with microalgae Phormidium valderianum using response surface methodology

As carbon dioxide emissions rise, there's need for alternative strategies, including microorganisms, to capture and mitigate them. The present study investigated on the capability and tolerance of microalgal strain, Phormidium valderianum to capture gaseous CO2 at varying levels (5-30 %). A biomass productivity of 0.0216 ± 0.027 gL-1day-1 and rate of CO2 fixation of 0.035 gL-1day-1 was obtained for 25 % CO2 concentration. From this study, it is evident that higher CO2 levels led to elevated carbohydrate concentration. In addition, protein concentration doubled with the introduction of 25 % CO2. In optimization studies, pH 10, 25 % CO2, and 200 mg/L of Ca(OH)2 concentration was found to be optimal for biomass growth. A higher rate of CO2 fixation of 0.315 gL-1day-1 was achieved at these optimum conditions using response surface methodology. Furthermore, the study demonstrated that microalgae, Phormidium valderianum has the potential to serve as a promising alternative for capturing CO2 emissions.

Influence of culture media composition on the rheology of microalgae concentrates on a large scale

The role of microalgae in the production of bioproducts and biofuels, along with their ability to provide a sustainable pathway for wastewater treatment, makes them promising alternatives to conventional processes. Nevertheless, large-scale downstream processing requires an understanding of biomass rheology that needs to be addressed further. This study aimed to characterize microalgal concentrates rheologically in different culture media. The presence of bacteria was quantified by photorespirometry and plate counting techniques. The culture medium was found to significantly influence viscosity, with primary wastewater exhibiting the highest viscosity and seawater plus pig slurry the lowest. The concentration of heterotrophic bacteria was directly related to the viscosity. Extracellular polysaccharides (EPS) in supernatant exhibited an inverse viscosity trend compared to biomass concentrates, with pig slurry cultures having higher concentrations. These findings emphasize the profound influence of culture medium and EPS on the rheology of microalgal biomass, underscoring the need for continued research aimed at facilitating and optimizing large-scale downstream processes within the framework of a circular economy and the attainment of the Sustainable Development Goals (6,8, and 12).

Advancements of microalgal upstream technologies: Bioengineering and application aspects in the paradigm of circular bioeconomy

Sustainable energy transition has brought the attention towards microalgae utilization as potential feedstock due to its tremendous capabilities over its predecessors for generating more energy with reduced carbon footprint. However, the commercialization of microalgae feedstock remains debatable due to the various factors and considerations taken into scaling-up the conventional microalgal upstream processes. This review provides a state-of-the-art assessment over the recent developments of available and existing microalgal upstream cultivation systems catered for maximum biomass production. The key growth parameters and main cultivation modes necessary for optimized microalgal growth conditions along with the fundamental aspects were also reviewed and evaluated comprehensively. In addition, the advancements and strategies towards potential scale-up of the microalgal cultivation technologies were highlighted to provide insights for further development into the upstream processes aimed at sustainable circular bioeconomy.

Potential of biogenic and non-biogenic waste materials as flocculant for algal biomass harvesting: Mechanism, parameters, challenges and future prospects

In this review article, waste materials (biogenic/non-biogenic) are focused as the flocculants for harvesting of algal biomass. Chemical flocculants are widely utilized for the effective harvesting of algal biomass at a commercial scale while the high cost is a major drawback. The waste materials-based flocculants (WMBF) are started to utilize as one of the cost-effective performance for dual benefits of waste minimization and reuse for sustainable recovery of biomass. The novelty of the article is articulated with the objective that presents an insight of WMBF, classification of WMBF, preparation methods of WMBF, mechanisms of flocculation, factors affecting flocculation-mechanism, challenges and future recommendations that are required for harvesting of algae. The WMBF are shown similar flocculation mechanisms and flocculation efficiencies as chemical flocculants. Thus, the utilization of waste material for the flocculation process of algal cells minimizes the waste load into the environment and transforms the waste materials into valuable resources.

Influence of hydrothermal carbonization conditions on the porosity, functionality, and sorption properties of microalgae hydrochars

Green microalgae is a possible feedstock for the production of biofuels, chemicals, food/feed, and medical products. Large-scale microalgae production requires large quantities of water and nutrients, directing the attention to wastewater as a cultivation medium. Wastewater-cultivated microalgae could via wet thermochemical conversion be valorised into products for e.g., water treatment. In this study, hydrothermal carbonization was used to process microalgae polycultures grown in municipal wastewater. The objective was to perform a systematic examination of how carbonization temperature, residence time, and initial pH affected solid yield, composition, and properties. Carbonization temperature, time and initial pH all had statistically significant effects on hydrochar properties, with temperature having the most pronounced effect; the surface area increased from 8.5 to 43.6 m² g^-1 as temperature was increased from 180 to 260 °C. However, hydrochars produced at low temperature and initially neutral pH generally had the highest capacity for methylene blue adsorption. DRIFTS analysis of the hydrochar revealed that the pH conditions changed the functional group composition, implying that adsorption was electrostatic interactions driven. This study concludes that un-activated hydrochars from wastewater grown microalgae produced at relatively low hydrothermal carbonization temperatures adsorb methylene blue, despite having low surface area.

From waste-activated sludge to algae: a self-reliant cultivation process in photoreactors using saline conditions

In this study, microalgae-bacteria (MB) systems using saline conditions (3 and 5% salinity) were built in order to use waste-activated sludge (AS) as raw material for cultivating lipid-rich microalgae. Algae were observed to be flourishing in 60 days of operation, which totally used the N and P released from the sludge biomass. A prominent improvement of lipid content in MB consortia was obtained under algae growth and salinity stimulation, which occupied 119-136 mg/g-SS rather than a low content of 12.1 mg/g-SS in AS. Lipid enrichment also brought a 3.1-3.3 times total heat release (THR) in the MB biomass. The marine spherical algae Porphyridium, as well as filamentous Geitlerinema, Nodularia, Leptolyngbya were found to be the main lipid producers and self-flocculated to 23.0% (R1) and 33.5% (R2) volume under the effect of residue EPS. This study had a big meaning in not only waste sludge reduction but also in manufacturing useful bioenergy products.

Maximizing unsaturated fatty acids production by using sugarcane agroindustry wastes in cultivation of Desmodesmus sp. in a flat plate photobioreactor

Microalgae lipid accumulation can be accomplished by different strategies rather than naturally reaching the stationary phase. Many studies employ nitrogen (N) depletion to improve lipid production; however, this approach might not be a suitable alternative when growth in wastewater is attempted. Agro-industry effluents in particular can have high concentrations of N, so nutrient removal is also required. This study evaluated two possibilities of achieving stress conditions in Desmodesmus sp. cultivation: light intensity and CO₂ concentration. The culture medium also included liquid and solid residues from the sugarcane agro-industry: vinasse and a biofertilizer produced from bagasse biochar. Optimization of growth in a flat plate photobioreactor was conducted by combining a two-level factorial design and simplex methodology. Both the highest biomass and polyunsaturated fatty acid productivities (150.2 and 21.4 mg L^-1 day^-1, respectively) were achieved near the central points (5% CO₂ in air and 1000 μmol m^-2 s^-1 light intensity). These results show the possibility of microalgae growth in a sustainable medium coupled with high-value lipid production, e.g., omegas-3, - 6, and - 9.