Contribution of high resolution peripheral quantitative CT to the management of bone and joint diseases

Proton Pump Inhibitors and Bone Health: An Update Narrative Review

Proton pump inhibitors (PPIs) are an antacid drug often used in acid-related disorders. They decrease acid secretion in the stomach by blocking an enzyme called H+/K+ ATPase which controls acid production. Introduced to the market in 1989, their use has increased rapidly worldwide and they are now among the top 10 most prescribed drugs in the United States. As of 2015, the FDA has already approved six drugs of this class (omeprazole, esomeprazole, lansoprazole, dexlansoprazole, pantoprazole and rabeprazole). Recently, the risks and benefits of long-term PPI use were questioned and many studies indicated that their use should be carefully considered, especially in young patients, whose treatment with these drugs could last many years. Even greater concerns have been raised about a potential positive association between PPIs and osteoporotic fracture risk including the hip, spine and wrist. Although based on observational studies, there is substantial evidence associating the long-term use of PPIs and fracture. This relationship is only partially admitted due to the lack of consistent effects of PPIs on bone mineral density loss. Therefore, this narrative review aimed to discuss the recent findings pertaining to the risk of osteoporotic fracture associated with PPIs, in particular prolonged use, and to call for further research to elucidate the mechanisms associated with this bone fragility.

Analysis of bone erosions in rheumatoid arthritis using HR-pQCT: Development of a measurement algorithm and assessment of longitudinal changes

Purpose

The purpose of this study was to establish an algorithm for measuring bone erosions at metacarpophalangeal (MCP) joints using high-resolution peripheral quantitative computed tomography (HR-pQCT), to investigate the precision of measurements, and to assess longitudinal changes in bone erosions among patients with rheumatoid arthritis (RA).

Methods

The 2nd and 3rd MCP joints were scanned at a voxel size of 60.7 μm using second-generation HR-pQCT. Bone erosions on MCP joints were identified using a semi-automated algorithm we developed, and each erosion parameter was measured. Measurement reproducibility was evaluated in 19 healthy subjects using intraclass correlation coefficients (ICCs) and root mean square percent coefficient of variance (RMS%CV). Finally, longitudinal changes in bone erosions over a period of 12 months were assessed in 26 patients with RA based on the calculated least significant change (LSC).

Results

Reproducibilities for measurement parameters regarding bone erosions with our algorithm were good (all ICCs ≥ 0.98; all RMS%CVs < 5%). No erosion parameters showed significant changes after 12 months of treatment in terms of median values in all erosions, while both progression and repair of erosions were observed individually (e.g., erosion volume: progression, 26% (+0.62 mm3); repair, 34% (-0.85 mm3); no change, 40%).

Conclusions

The measurement algorithm developed for bone erosions at MCP joints showed good reproducibility. Both progression and repair of bone erosions were observed in patients with RA even after 12 months of appropriate treatment. Our algorithm may be useful to investigate the etiology of RA and assess drug efficacy.

Volumetric Bone Mineral Density Measured by HR-pQCT in Patients with Psoriasis or Psoriatic Arthritis: A Systematic Review and Meta-Analysis with Trial Sequential Analysis

Bone health in psoriasis and psoriatic arthritis has been emphasized in recent years. Novel imaging modalities allow investigations into volumetric bone mineral density (vBMD) and bone microstructure in psoriatic patients. However, literature regarding vBMD measured by high-resolution peripheral quantitative computed tomography (HR-pQCT) is inconclusive. We conducted a systematic review and meta-analysis to evaluate vBMD in patients with psoriatic disease. We searched PubMed, EMBASE, Web of Science, and Cochrane Library for relevant observational studies. A random-effects meta-analysis with trial sequential analysis (TSA) was performed. The pooled mean difference (MD) and 95% confidence interval (CI) were calculated. Five studies with 780 patients were included. Patients with psoriatic disease showed a lower average vBMD than controls (MD -14.90; 95% CI -22.90 to -6.89; TSA-adjusted CI -23.77 to -6.03; I² = 41%). Trabecular vBMD and cortical vBMD results were inconclusive because of the small sample size. Patients recruited in Asia and those whose vBMD were measured at the distal radius exhibited a lower average vBMD than controls. Further research should clarify the association of psoriasis with bone microstructure and the underlying pathophysiology.

[Progress of change in bone mineral density after knee arthroplasty]

Objective

To summarize research progress of change in bone mineral density (BMD) after knee arthroplasty and its diagnostic methods, influencing factors, and drug prevention and treatment.

Methods

The relevant literature at home and abroad was reviewed and summarized from research status of the advantages and disadvantages of BMD assessment methods, the trend of changes in BMD after knee arthroplasty and its influencing factors, and the differences in effectiveness of drugs.

Results

The central BMD and mean BMD around the prosthesis decrease after knee arthroplasty, which is closely associated with body position, age, weight, daily activities, and the fixation methods, design, and material of prosthesis. Denosumab, bisphosphonates, and teriparatide et al. can decrease BMD loss after knee arthroplasty.

Conclusion

BMD after knee arthroplasty decreases, which is related to various factors, but the mechanism is unclear. At present, some inhibitors of bone resorption can decrease BMD loss after knee arthroplasty. However, its long-term efficacy remains to be further explored.

Global and Spatial Compartmental Interrelationships of Bone Density, Microstructure, Geometry and Biomechanics in the Distal Radius in a Colles' Fracture Study Using HR-pQCT

BACKGROUND

Bone parameters derived from HR-pQCT have been investigated on a parameter-by-parameter basis for different clinical conditions. However, little is known regarding the interrelationships of bone parameters and the spatial distribution of these interrelationships. In this work: 1) we investigate compartmental interrelationships of bone parameters; 2) assess the spatial distribution of interrelationships of bone parameters; and 3) compare interrelationships of bone parameters between postmenopausal women with and without a recent Colles' fracture.

METHODS

Images from the unaffected radius in fracture cases (n=84), and from the non-dominant radius of controls (n=98) were obtained using HR-pQCT. Trabecular voxel-based maps of local bone volume fraction (L.Tb.BV/TV), homogenized volumetric bone mineral density (H.Tb.BMD), homogenized μFEA-derived strain energy density (H.Tb.SED), and homogenized inter-trabecular distances (H.Tb.1/N) were generated; as well as surface-based maps of apparent cortical bone thickness (Surf.app.Ct.Th), porosity-weighted cortical bone thickness (Surf.Ct.SIT), mean cortical BMD (Surf.Ct.BMD), and mean cortical SED (Surf.Ct.SED). Anatomical correspondences across the parametric maps in the study were established via spatial normalization to a common template. Mean values of the parametric maps before spatial normalization were used to assess compartmental Spearman's rank partial correlations of bone parameters (e.g., between H.Tb.BMD and L.Tb.BV/TV or between Surf.Ct.BMD and Surf.app.Ct.Th). Spearman's rank partial correlations were also assessed for each voxel and vertex of the spatially normalized parametric maps, thus generating maps of Spearman's rank partial correlation coefficients. Correlations were performed independently within each group, and compared between groups using the Fisher's Z transformation.

RESULTS

All within-group global trabecular and cortical Spearman's rank partial correlations were significant; and the correlations of H.Tb.BMD-L.Tb.BV/TV, H.Tb.BMD-H.Tb.1/N, L.Tb.BV/TV-H.Tb.1/N, Surf.Ct.BMD-Surf.Ct.SED and Surf.Ct.SIT-Surf.Ct.SED were significantly different between controls and fracture cases. The spatial analyses revealed significant heterogeneous voxel- and surface-based correlation coefficient maps across the distal radius for both groups; and the correlation maps of H.Tb.BMD-L.Tb.BV/TV, H.Tb.BMD-H.Tb.1/N, L.Tb.BV/TV-H.Tb.1/N, H.Tb.1/N-H.Tb.SED and Surf.app.Ct.Th - Surf.Ct.SIT yielded small clusters of significant correlation differences between groups.

DISCUSSION

The heterogeneous spatial distribution of interrelationships of bone parameters assessing density, microstructure, geometry and biomechanics, along with their global and local differences between controls and fracture cases, may help us further understand different bone mechanisms of bone fracture.

Radiofrequency echographic multi-spectrometry for the in-vivo assessment of bone strength: state of the art-outcomes of an expert consensus meeting organized by the European Society for Clinical and Economic Aspects of Osteoporosis, Osteoarthritis and Musculoskeletal Diseases (ESCEO)

PURPOSE

The purpose of this paper was to review the available approaches for bone strength assessment, osteoporosis diagnosis and fracture risk prediction, and to provide insights into radiofrequency echographic multi spectrometry (REMS), a non-ionizing axial skeleton technique.

METHODS

A working group convened by the European Society for Clinical and Economic Aspects of Osteoporosis and Osteoarthritis met to review the current image-based methods for bone strength assessment and fracture risk estimation, and to discuss the clinical perspectives of REMS.

RESULTS

Areal bone mineral density (BMD) measured by dual-energy X-ray absorptiometry (DXA) is the consolidated indicator for osteoporosis diagnosis and fracture risk assessment. A more reliable fracture risk estimation would actually require an improved assessment of bone strength, integrating also bone quality information. Several different approaches have been proposed, including additional DXA-based parameters, quantitative computed tomography, and quantitative ultrasound. Although each of them showed a somewhat improved clinical performance, none satisfied all the requirements for a widespread routine employment, which was typically hindered by unclear clinical usefulness, radiation doses, limited accessibility, or inapplicability to spine and hip, therefore leaving several clinical needs still unmet. REMS is a clinically available technology for osteoporosis diagnosis and fracture risk assessment through the estimation of BMD on the axial skeleton reference sites. Its automatic processing of unfiltered ultrasound signals provides accurate BMD values in view of fracture risk assessment.

CONCLUSIONS

New approaches for improved bone strength and fracture risk estimations are needed for a better management of osteoporotic patients. In this context, REMS represents a valuable approach for osteoporosis diagnosis and fracture risk prediction.

Lack of Association Between Select Circulating miRNAs and Bone Mass, Turnover, and Fractures: Data From the OFELY Cohort

Postmenopausal osteoporosis is characterized by the occurrence of fragility fracture with an increase in morbidity and mortality. Recently, microRNAs (miRNAs) have raised interest as regulators of translational repression, mediating a number of key processes, including bone tissue in both physiological and diseased states. The aim of this study was to examine the serum levels of 32 preselected miRNAs with reported function in bone and their association with osteoporotic fracture. We performed cross-sectional and longitudinal analyses from the OFELY Cohort. Serum levels of the miRNAs were quantified by qRT-PCR in 682 women: 99 premenopausal and 583 postmenopausal women, with 1 and 122 women with prevalent fragility fractures in each group, respectively. We have collected clinical variables (such as age, prevalent, and incident fractures), bone turnover markers (BTMs), BMD by dual X-ray absorptiometry, and bone microarchitecture with HRpQCT. We observed a number of miRNAs to be associated with fragility fractures (prevalent or incident), BTMs, BMD, and microarchitecture. This effect, however, was negated after age adjustment. This may be because age was also strongly associated with the serum levels of the 32 miRNAs (correlation coefficient up to 0.49), confirming previous findings. In conclusion, in a well-characterized prospective cohort with a sizeable sample size, we found no evidence that these 32 preselected miRNAs were not associated with BTMs, BMD, microarchitecture, and or fragility fractures. © 2019 American Society for Bone and Mineral Research.

Bone mineral density and microarchitecture linkages with micro- and macro-vascular impairments at the hand in systemic sclerosis: an HRpQCT study

Objective

To investigate the link between bone alteration and micro- and macro-vascular disease in patients with systemic sclerosis (SSc).

Results

33 SSc patients were included. In univariate analysis, low values of cortical vBMD were significantly associated with a low DBI at the 2nd finger (p = 0.004) and at the 4th (p = 0.002) and with severe capillaroscopic score (p = 0.008). In multivariate analyses, low cortical vBMD was associated with a low DBI at the 4th finger, age and severe capillaroscopic score (adjusted R² = 0.58; p = < 0.001). Low cortical thickness was associated with a low DBI at the 4th finger, severe capillaroscopic score and age (adjusted R² = 0.49, p = < 0.001).

Conclusion

Our study findings showed an association between micro- and macro-vessel damage and altered microarchitectural indices at the radius in SSc.

Methods

We performed a pilot study in female patients with SSc. Microvascular disease was assessed by the capillaroscopic score of Cutolo. Macrovascular involvement was measured by digito-brachial pressure index (DBI) on laser-Doppler at the 2nd and 4th finger. Volumetric bone mineral density (vBMD) and bone microarchitecture involvement were analysed by High-Resolution peripheral Quantitative Computed Tomography (HRpQCT) at the distal radius.

The QUALYOR (QUalité Osseuse LYon Orléans) study: a new cohort for non invasive evaluation of bone quality in postmenopausal osteoporosis. Rationale and study design

The diagnostic performance of densitometry is inadequate. New techniques of non-invasive evaluation of bone quality may improve fracture risk prediction. Testing the value of these techniques is the goal of the QUALYOR cohort.

INTRODUCTION

The bone mineral density (BMD) of postmenopausal women who sustain osteoporotic fracture is generally above the World Health Organization definition for osteoporosis. Therefore, new approaches to improve the detection of women at high risk for fracture are warranted.

METHODS

We have designed and recruited a new cohort to assess the predictive value of several techniques to assess bone quality, including high-resolution peripheral quantitative computerized tomography (HRpQCT), hip QCT, calcaneus texture analysis, and biochemical markers. We have enrolled 1575 postmenopausal women, aged at least 50, with an areal BMD femoral neck or lumbar spine T-score between - 1.0 and - 3.0. Clinical risk factors for fracture have been collected along with serum and blood samples.

RESULTS

We describe the design of the QUALYOR study. Among these 1575 women, 80% were aged at least 60. The mean femoral neck T-score was - 1.6 and the mean lumbar spine T-score was -1.2. This cohort is currently being followed up.

CONCLUSIONS

QUALYOR will provide important information on the relationship between bone quality variables and fracture risk in women with moderately decreased BMD.

Bioinspired Technologies to Connect Musculoskeletal Mechanobiology to the Person for Training and Rehabilitation

Musculoskeletal tissues respond to optimal mechanical signals (e.g., strains) through anabolic adaptations, while mechanical signals above and below optimal levels cause tissue catabolism. If an individual's physical behavior could be altered to generate optimal mechanical signaling to musculoskeletal tissues, then targeted strengthening and/or repair would be possible. We propose new bioinspired technologies to provide real-time biofeedback of relevant mechanical signals to guide training and rehabilitation. In this review we provide a description of how wearable devices may be used in conjunction with computational rigid-body and continuum models of musculoskeletal tissues to produce real-time estimates of localized tissue stresses and strains. It is proposed that these bioinspired technologies will facilitate a new approach to physical training that promotes tissue strengthening and/or repair through optimal tissue loading.