Extraframework FeAlO species occluded in MFI zeolite as the active species in the oxidation of benzene to phenol with nitrous oxide

Selective Formation of α-Fe(II) Sites on Fe-Zeolites through One-Pot Synthesis

α-Fe(II) active sites in iron zeolites catalyze N₂O decomposition and form highly reactive α-O that selectively oxidizes unreactive hydrocarbons, such as methane. How these α-Fe(II) sites are formed remains unclear. Here different methods of iron introduction into zeolites are compared to derive the limiting factors of Fe speciation to α-Fe(II). Postsynthetic iron introduction procedures on small pore zeolites suffer from limited iron diffusion and dispersion leading to iron oxides. In contrast, by introducing Fe(III) in the hydrothermal synthesis mixture of the zeolite (one-pot synthesis) and the right treatment, crystalline CHA can be prepared with >1.6 wt % Fe, of which >70% is α-Fe(II). The effect of iron on the crystallization is investigated, and the intermediate Fe species are tracked using UV-vis-NIR, FT-IR, and Mössbauer spectroscopy. These data are supplemented with online mass spectrometry in each step, with reactivity tests in α-O formation and with methanol yields in stoichiometric methane activation at room temperature and pressure. We recover up to 134 μmol methanol per gram in a single cycle through H₂O/CH₃CN extraction and 183 μmol/g through steam desorption, a record yield for iron zeolites. A general scheme is proposed for iron speciation in zeolites through the steps of drying, calcination, and activation. The formation of two cohorts of α-Fe(II) is discovered, one before and one after high temperature activation. We propose the latter cohort depends on the reshuffling of aluminum in the zeolite lattice to accommodate thermodynamically favored α-Fe(II).

Theoretical Studies of DENOx SCR over Cu-, Fe- and Mn-FAU Catalysts

Ab initio calculations based on the density functional theory were used. A cluster model of the faujasite zeolite structure (Al2Si22O66H36) with metal particles adsorbed above the aluminium centres was used. The NO and NH3 adsorption processes, individual and co-adsorption, have been studied over metal nanoparticles bound into zeolite clusters. Several configurations, electronic structure (charges, bond orders) and vibration frequencies have been analyzed to determine feasible pathways for the deNOx reaction. The M2O dimers (M = Cu, Mn or Fe) were considered in relation to the previous studies of iron complexes.

Advances in the synthesis, characterisation, and mechanistic understanding of active sites in Fe-zeolites for redox catalysts

The recent research developments on the active sites in Fe-zeolites for redox catalysis are discussed. Building on the characterisation of the α-Fe/α-O active sites in the beta and chabazite zeolites, we demonstrate a bottom-up approach to successfully understand and develop Fe-zeolite catalysts. We use the room temperature benzene to phenol reaction as a relevant example. We then suggest how the spectroscopic identification of other monomeric and dimeric iron sites could be tackled. The challenges in the characterisation of active sites and intermediates in NOX selective catalytic reduction catalysts and further development of catalysts for mild partial methane oxidation are briefly discussed.

Stable Fe/ZSM-5 Nanosheet Zeolite Catalysts for the Oxidation of Benzene to Phenol

Fe/ZSM-5 nanosheet zeolites of varying thickness were synthesized with di- and tetraquaternary ammonium structure directing agents and extensively characterized for their textural, structural, and catalytic properties. Introduction of Fe3+ ions in the framework of nanosheet zeolites was slightly less effective than in bulk ZSM-5 zeolite. Steaming was necessary to activate all catalysts for N2O decomposition and benzene oxidation. The higher the Fe content, the higher the degree of Fe aggregation was after catalyst activation. The degree of Fe aggregation was lower when the crystal domain size of the zeolite or the Fe content was decreased. These two parameters had a substantial influence on the catalytic performance. Decreasing the number of Fe sites along the b-direction strongly suppressed secondary reactions of phenol and, accordingly, catalyst deactivation. This together with the absence of diffusional limitations in nanosheet zeolites explains the much higher phenol productivity obtainable with nanostructured Fe/ZSM-5. Steamed Fe/ZSM-5 zeolite nanosheet synthesized using C22-6-3·Br2 (domain size in b-direction ∼3 nm) and containing 0.24 wt % Fe exhibited the highest catalytic performance. During the first 24 h on stream, this catalyst produced 185 mmolphenol g-1. Calcination to remove the coke deposits completely restored the initial activity.

Al-free Fe-beta as a robust catalyst for selective reduction of nitric oxide by ammonia

Al-free Fe-beta prepared via a post-synthesis solid-state metallation route is established as an active and durable catalyst for NH₃-SCR.

Unusual coordination state of cobalt ions in zeolites modified by aluminum chloride

The treatment of Co–ZSM-5 with anhydrous AlCl₃ changes the cobalt coordination state and the adsorption properties, due to the formation of Co–Cl–Al structures on the zeolite surface.

Ferrocene-modified carbon nitride for direct oxidation of benzene to phenol with visible light

Ferrocene moieties were heterogenized onto carbon nitride polymers by a covalent -C=N- linkage bridging the two conjugation systems, enabling the merging of the redox function of ferrocene with carbon nitride photocatalysis to construct a heterogeneous Photo-Fenton system for green organocatalysis at neutral conditions. The synergistic donor-acceptor interaction between the carbon nitride matrix and ferrocene group, improved exciton splitting, and coupled photocatalytic performance allowed the direct synthesis of phenol from benzene in the presence of H2 O2 under visible light irradiation. This innovative modification method will offer an avenue to construct functionalized two-dimensional polymers useful also for other green synthesis processes using solar irradiation.