Au–Ag alloy nanoparticle as catalyst for CO oxidation: Effect of Si/Al ratio of mesoporous support

Oxygen Species Enhanced Catalytic Efficiency of Au1Agx/SiO2 Catalysts for CO Oxidation

A series of Au1Agx alloys (x = 0, 0.2, 0.3, 1.0, and 3.0) supported over SiO2 has been prepared and pretreated via different atmospheric processes. The physical-chemical properties of these materials have been systematically characterized using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible (UV-vis) spectroscopy, and transmission electron microscopy (TEM). The results reveal that oxygen species are doped into the alloy structure by the oxygen-involved pretreatment, leading to lattice expansion as well as a significant increase in catalytic activity. Improvement in the catalytic activity of Au1Ag0.3/SiO2 through sequential reduction and oxidation pretreatment was evidenced by a decrease in the temperature of 100% CO conversion by approximately 500 K. A volcano trend in catalytic activity is found as the Ag composition is increased in the alloy structure. Density-functional theory (DFT) calculations suggest that the introduced oxygen species are likely present at the subsurface of the AuAg alloy and involved in the reaction or in modifying the electronic structure of surface Ag, thereby enhancing the catalytic activity for CO oxidation.

SERS monitoring of methylene blue degradation by Au-Ag@Cu2O-rGO nanocomposite

A combination of multiple materials effectively improves and enhances the performance of the materials. Thus, a gold-silver@cuprous oxide (Au-Ag@Cu2O)-reduced graphene oxide (rGO) structure was designed and fabricated. We decorated the Au nanoparticles (NPs) on the Ag@Cu2O-rGO composite surface by a redox reaction to form a Au-Ag@Cu2O-rGO structure with two noble metals attached to a Cu2O semiconductor. A comparable Au-Ag@Cu2O structure was also fabricated. After decorating Au NPs into the Ag@Cu2O-rGO composite, the Au-Ag@Cu2O composite structure was loosened, and the surface and interior of the Cu2O shell were decorated with Au and Ag NPs. Moreover, the addition of Au NPs resulted in a proper surface plasmon resonance effect and a significant broadening of the absorption range. The loose structure increased the adsorption of the probe molecules, which increased the surface-enhanced Raman scattering (SERS) intensity. In addition, the fabricated Au-Ag@Cu2O-rGO exhibited excellent catalytic reduction of methylene blue (MB) with sodium borohydride (NaBH4). Therefore, the SERS-based monitoring of the MB degradation was obviously improved.

Selective Hydrogenolysis of 5-Hydroxymethylfurfural to 2-Hexanol over Au/ZrO2 Catalysts

2-Hexanol (2-HOL) is a versatile biomass-derived platform molecule for synthesis of liquid transportation fuels, lubricants, or detergents. Herein, a one-step preparation of 2-HOL using 5-hydroxymethylfurfural (HMF) as a substrate was reported for the first time. Several Au-based catalysts supported on different metal oxides were prepared to explore the relationship between carrier and catalytic activity. The results showed that the highest 2-HOL yield of 65.8 % was obtained at complete HMF conversion over the 5 %Au/ZrO₂ catalyst. The 5 %Au/ZrO₂ catalyst exhibited excellent durability after five consecutive recycling runs, while confirming its remarkable ring-opening hydrogenolysis on other biomass-derived furanics, furfural, with a total yield of 1-pentanol and 2-pentanol of 67.4 %. The distinguished ring-opening hydrogenolysis performance of the Au/ZrO₂ catalyst originated from a synergistic effect between the interfacial Au-O-Zr oxygen vacancies-induced Lewis acidic sites (activating C-OH/C=O bonds) and metallic Au (activating H₂ ). This work provides a possibility for producing 2-HOL from HMF with high yield, expanding the sustainable application of lignocellulosic biomass.

Exploring the Effects of a Doping Silver Atom on Anionic Gold Clusters' Reactivity with O2

Reactivities of AgAu_n-1^- (n = 3-10) with O₂ at a low temperature were studied using an instrument combining a magnetron sputter cluster source, a microflow reactor, and a time-of-flight mass spectrometer. Their reaction products as well as size-dependent kinetic rates were nearly identical to those of corresponding Au_n^- (n = 3-10). Previous experiments showed that the Ag atom in AgAu_n-1^- (n = 3-10) was fully or partially enclosed by the gold atoms. We studied the adsorption of O₂ on these reported structures using the B3LYP theory with relatively large basis sets. The theoretical results indicate that the adsorption sites as well as the adsorption energies of O₂ on AgAu_n-1^- (n = 3-10) are nearly identical to those on the corresponding Au_n^- (n = 3-10). The O₂ adsorption on a series of proposed isomers of AgAu_n-1^- (denoted as Au_n-1Ag^-), in which the silver atom was on the protruding site, was explored using the same theoretical methods. The O₂ tends to bond with the protruding Ag atoms, and the binding energies are apparently higher than those on the corresponding Au_n^- and AgAu_n-1^-. The adsorption and activation of O₂ on Au_n^-, AgAu_n-1^-, and Au_n-1Ag^- were correlated with their global electron detachment energies (VDEs) as well as the element types of the adsorption sites. Generally, low VDE values and silver sites facilitate the O₂ adsorption, and these two factors separately dominate in various cluster species. The revealed effects of a doping silver atom in small gold clusters are helpful to understand the role of the residual silver components in many nano gold catalysts.

Effect of the Metal Deposition Order on Structural, Electronic and Catalytic Properties of TiO2-Supported Bimetallic Au-Ag Catalysts in 1-Octanol Selective Oxidation

Au and Ag were deposited on TiO2 modified with Ce, La, Fe or Mg in order to obtain bimetallic catalysts to be used for liquid-phase oxidation of 1-octanol. The effects of the deposition order of gold and silver, and the nature of the support modifying additives and redox pretreatments on the catalytic properties of the bimetallic Au-Ag catalysts were studied. Catalysts were characterized by low-temperature nitrogen adsorption–desorption, energy dispersive spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, high-resolution transmission electron microscopy and ultraviolet-visible diffuse reflectance spectroscopy. It was found that pretreatments with hydrogen and oxygen at 300 °C significantly decreased the activity of AuAg catalysts (silver was deposited first) and had little effect on the catalytic properties of AgAu samples (gold was deposited first). The density functional theory method demonstrated that the adsorption energy of 1-octanol increased for all positively charged AuxAgyq (x + y = 10, with a charge of q = 0 or +1) clusters compared with the neutral counterparts. Lanthanum oxide was a very effective promoter for both monometallic and bimetallic gold and silver catalysts in the studied process.

The Origin of Au/Ce1-xZrxO2 Catalyst’s Active Sites in Low-Temperature CO Oxidation

Gold catalysts have found applications in many reactions of both industrial and environmental importance. Great interest has been paid to the development of new processes that reduce energy consumption and minimize pollution. Among these reactions, the catalytic oxidation of carbon monoxide (CO) is an important one, considering that a high concentration of CO in the atmosphere creates serious health and environmental problems. This paper examines the most important achievements and conclusions arising from the own authorship contributions concerning (2 wt. % Au)/Ce1−xZrxO2 catalyst’s active sites in low-temperature CO oxidation. The main findings of the present review are: (1) The effect of preparing conditions on Au crystallite size, highlighting some of the fundamental underpinnings of gold catalysis: the Au surface composition and the poisoning effect of residual chloride on the catalytic activity of (2 wt. % Au)/Ce1−xZrxO2 catalysts in CO oxidation; (2) The identification of ion clusters related to gold and their effect on catalyst’ surface composition; (3) The importance of physicochemical properties of oxide support (e.g., its particle size, oxygen mobility at low temperature and redox properties) in the creation of catalytic performance of Au catalysts; (4) The importance of oxygen vacancies, on the support surface, as the centers for oxygen molecule activation in CO reaction; (5) The role of moisture (200–1000 ppm) in the generation of enhanced CO conversion; (6) The Au-assisted Mars-van Krevelen (MvK) adsorption–reaction model was pertinent to describe CO oxidation mechanism. The principal role of Au in CO oxidation over (2 wt. % Au)/Ce1−xZrxO2 catalysts was related to the promotion in the transformation process of reversibly adsorbed or inactive surface oxygen into irreversibly adsorbed active species; (7) Combination of metallic gold (Au0) and Au-OH species was proposed as active sites for CO adsorption. These findings can help in the optimization of Au-containing catalysts.

Recent Progresses in Constructing the Highly Efficient Ni Based Catalysts With Advanced Low-Temperature Activity Toward CO2 Methanation

With the development and prosperity of the global economy, the emission of carbon dioxide (CO2) has become an increasing concern. Its greenhouse effect will cause serious environmental problems, such as the global warming and climate change. Therefore, the worldwide scientists have devoted great efforts to control CO2 emissions through various strategies, such as capture, resource utilization, sequestration, etc. Among these, the catalytic conversion of CO2 to methane is considered as one of the most efficient routes for resource utilization of CO2 owing to the mild reaction conditions and simple reaction device. Pioneer thermodynamic studies have revealed that low reaction temperature is beneficial to the high catalytic activity and CH4 selectivity. However, the low temperature will be adverse to the enhancement of the reaction rate due to kinetic barrier for the activation of CO2. Therefore, the invention of highly efficient catalysts with promising low temperature activities toward CO2 methanation reaction is the key solution. The Ni based catalysts have been widely investigated as the catalysts toward CO2 methanation due to their low cost and excellent catalytic performances. However, the Ni based catalysts usually perform poor low-temperature activities and stabilities. Therefore, the development of highly efficient Ni based catalysts with excellent low-temperature catalytic performances has become the research focus as well as challenge in this field. Therefore, we summarized the recent research progresses of constructing highly efficient Ni based catalysts toward CO2 methanation in this review. Specifically, the strategies on how to enhance the catalytic performances of the Ni based catalysts have been carefully reviewed, which include various influencing factors, such as catalytic supports, catalytic auxiliaries and dopants, the fabrication methods, reaction conditions, etc. Finally, the future development trend of the Ni based catalysts is also prospected, which will be helpful to the design and fabrication of the Ni catalysts with high efficiency toward CO2 methanation process.

Adsorption and Oxidative Desorption of Acetaldehyde over Mesoporous Fe x O y H z /Al2O3

Fe _x O _y H _z nanostructures were incorporated into commercially available and highly porous alumina using the temperature-regulated chemical vapor deposition method with ferrocene as an Fe precursor and subsequent annealing. All processes were conducted under ambient pressure conditions without using any high-vacuum equipment. The entire internal micro- and mesopores of the Al₂O₃ substrate with a bead diameter of ∼2 mm were evenly decorated with Fe _x O _y H _z nanoparticles. The Fe _x O _y H _z /Al₂O₃ structures showed substantially high activity for acetaldehyde oxidation. Most importantly, Fe _x O _y H _z /Al₂O₃ with a high surface area (∼200 m²/g) and abundant mesopores was found to uptake a large amount of acetaldehyde at room temperature, and subsequent thermal regeneration of Fe _x O _y H _z /Al₂O₃ in air resulted in the emission of CO₂ with only a negligibly small amount of acetaldehyde because Fe _x O _y H _z nanoparticles can catalyze total oxidation of adsorbed acetaldehyde during the thermal treatment. Increase in the humidity of the atmosphere decreased the amount of acetaldehyde adsorbed on the surface due to the competitive adsorption of acetaldehyde and water molecules, although the adsorptive removal of acetaldehyde and total oxidative regeneration were verified under a broad range of humidity conditions (0-70%). Combinatory use of room-temperature adsorption and catalytic oxidation of adsorbed volatile organic compounds using Fe _x O _y H _z /Al₂O₃ can be of potential application in indoor and outdoor pollution treatments.

Interfacial electron transfer promotes photo-catalytic reduction of 4-nitrophenol by Au/Ag2O nanoparticles confined in dendritic mesoporous silica nanospheres

Manipulating the electron transfer in composite metals or/and metal oxides on the nanoscale is crucial for the development of improved heterogeneous catalysts.

A CO Adsorption Site Change Induced by Copper Substitution in a Ruthenium Catalyst for Enhanced CO Oxidation Activity

Ru is an important catalyst in many types of reactions. Specifically, Ru is well known as the best monometallic catalyst for oxidation of carbon monoxide (CO) and has been practically used in residential fuel cell systems. However, Ru is a minor metal, and the supply risk often causes violent fluctuations in the price of Ru. Performance-improved and cost-reduced solid-solution alloy nanoparticles of the Cu-Ru system for CO oxidation are now presented. Over the whole composition range, all of the Cu_x Ru_1-x nanoparticles exhibit significantly enhanced CO oxidation activities, even at 70 at % of inexpensive Cu, compared to Ru nanoparticles. Only 5 at % replacement of Ru with Cu provided much better CO oxidation activity, and the maximum activity was achieved by 20 at % replacement of Ru by Cu. The origin of the high catalytic performance was found as CO site change by Cu substitution, which was investigated using in situ Fourier transform infrared spectra and theoretical calculations.

Functionalized Ordered Mesoporous Silicas (MCM-41): Synthesis and Applications in Catalysis

Mesoporous silica sieves are among the most studied nano-objects due to their stable pore structure and easy preparation. In particular, MCM-41 have attracted increasing research attention due to their chemical versatility. This review focuses on the synthesis and regioselective functionalization of MCM-41 to prepare catalytic systems. The topics covered are: mono and di-functionalized MCM-41 as basic and acid catalysts, catalysts based on metallic complexes and heteropolyacids supported onto MCM-41, metallic nanoparticles embed onto functionalized MCM-41 and magnetic MCM-41 for catalytic purposes.

Au-Ag and Pt-Ag bimetallic nanoparticles@halloysite nanotubes: morphological modulation, improvement of thermal stability and catalytic performance

In this study, Au-Ag and Pt-Ag bimetallic nanocages were loaded on natural halloysite nanotubes (HNTs) via galvanic exchange based on Ag@HNT. By changing the ratio of Au to Ag or Pt to Ag in exchange processes, Au-Ag@HNT and Pt-Ag@HNT with different nanostructures were generated. Both Au-Ag@HNT and Pt-Ag@HNT systems showed significantly improved efficiency as peroxidase-like catalysts in the oxidation of o-phenylenediamine compared with monometallic Au@HNT and Pt@HNT, although inert Ag is dominant in the composition of both Au-Ag and Pt-Ag nanocages. On the other hand, loading on HNTs enhanced the thermal stability for every system, whether monometallic Ag nanoparticles, bimetallic Au-Ag or Pt-Ag nanocages. Ag@HNT sustained thermal treatment at 400 °C in nitrogen with improved catalytic performance, while Au-Ag@HNT and Pt-Ag@HNT maintained or even had slightly enhanced catalytic efficiency after thermal treatment at 200 °C in nitrogen. This study demonstrated that natural halloysite nanotubes are a good support for various metallic nanoparticles, improving their catalytic efficiency and thermal stability.

A novel label-free electrochemical immunosensor based on the enhanced catalytic currents of oxygen reduction by AuAg hollow nanocrystals for detecting carbohydrate antigen 199

Herein, bimetallic alloyed AuAg hollow nanocrystals (AuAg HNCs) were prepared by a simple one-pot aqueous method using polycytidysic acid (PCA) as the green growth-directing agent. The novel immunosensor for carbohydrate antigen 199 (CA199) was further constructed based on the enhanced catalytic currents of oxygen reduction reaction (ORR) by AuAg HNCs. By virtue of the good biocompatibility and catalytic activity of AuAg HNCs, the immunosensor exhibited superior analytical performance for the assay of CA199 under the optimal experimental conditions, the ORR signals linearly decreased with the increased CA199 concentrations in the range of 1 ~ 30UmL^-1, with the low detection limit of 0.228UmL^-1, improved stability, reproducibility and selectivity.

Surface chemistry of group IB metals and related oxides

Catalytic surface chemistry of IB metals are reviewed with an attempt to bridge model catalysts and powder catalysts.

Mesoporous cerium–zirconium oxides modified with gold and copper – synthesis, characterization and performance in selective oxidation of glycerol

Au–Cu interaction on Ce–Zr oxides leads to the increase of activity in glycerol oxidation and selectivity to glyceric acid.

Electrum, the Gold-Silver Alloy, from the Bulk Scale to the Nanoscale: Synthesis, Properties, and Segregation Rules

The alloy Au-Ag system is an important noble bimetallic phase, both historically (as "Electrum") and now especially in nanotechnology, as it is applied in catalysis and nanomedicine. To comprehend the structural characteristics and the thermodynamic stability of this alloy, a knowledge of its phase diagram is required that considers explicitly its size and shape (morphology) dependence. However, as the experimental determination remains quite challenging at the nanoscale, theoretical guidance can provide significant advantages. Using a regular solution model within a nanothermodynamic approach to evaluate the size effect on all the parameters (melting temperature, melting enthalpy, and interaction parameters in both phases), the nanophase diagram is predicted. Besides an overall shift downward, there is a "tilting" effect on the solidus-liquidus curves for some particular shapes exposing the (100) and (110) facets (cube, rhombic dodecahedron, and cuboctahedron). The segregation calculation reveals the preferential presence of silver at the surface for all the polyhedral shapes considered, in excellent agreement with the latest transmission electron microscopy observations and energy dispersive spectroscopy analysis. By reviewing the nature of the surface segregated element of different bimetallic nanoalloys, two surface segregation rules, based on the melting temperatures and surface energies, are deduced. Finally, the optical properties of Au-Ag nanoparticles, calculated within the discrete dipole approximation, show the control that can be achieved in the tuning of the local surface plasmon resonance, depending of the alloy content, the chemical ordering, the morphology, the size of the nanoparticle, and the nature of the surrounding environment.

An in situ study on the coalescence of monolayer-protected Au-Ag nanoparticle deposits upon heating

The structural evolution of thiolate-protected nanoparticles of gold, silver, and their alloys with various Au/Ag ratios (3:1, 1:1, and 1:3) upon heating was investigated by means of in situ synchrotron radiation X-ray diffraction. The relationships between the coalescence and composition of nanoparticles, as well as the surfactant reactions, were clarified. Experimental results show that there existed a critical temperature ranging from 120°C to 164°C, above which the tiny broad X-ray diffraction peaks became sharp and strong due to particle coalescence. The coalescence temperatures for alloy nanoparticle deposits were clearly lower than those for pure metals, which can be ascribed to the rivalry between the thermodynamic effect due to alloying and the interactions between surface-assembled layers and the surface atoms of the nanoparticles. The strong affinity of thiolates to Ag and thus complex interactions give rise to a greater energy barrier for the coalescence of nanoparticles into the bulk and subsequent high coalescence temperature. The influences of particle coalescence on the optical and electrical properties of the nanoparticle deposits were also explored.