Tuning acid–base cooperativity to create next generation silica-supported organocatalysts

Factors influencing the performance of organocatalysts immobilised on solid supports: A review

Organocatalysis has become a powerful tool in synthetic chemistry, providing a cost-effective alternative to traditional catalytic methods. The immobilisation of organocatalysts offers the potential to increase catalyst reusability and efficiency in organic reactions. This article reviews the key parameters that influence the effectiveness of immobilised organocatalysts, including the type of support, immobilisation techniques and the resulting interactions. In addition, the influence of these factors on catalytic activity, selectivity and recyclability is discussed, providing an insight into optimising the performance of immobilised organocatalysts for practical applications in organic chemistry.

Concerted Hydrosilylation Catalysis by Silica-Immobilized Cyclic Carbonates and Surface Silanols

Developing a method for creating a novel catalysis of organic molecules is essential because of the growing interest in organocatalysis. In this study, we found that cyclic carbonates immobilized on a nonporous or mesoporous silica support showed catalytic activity for hydrosilylation, which was not observed for the free cyclic carbonates, silica supports, or their physical mixture. Analysis of the effects of linker lengths and pore sizes on the catalytic activity and carbonate C=O stretching frequency revealed that the proximity of carbonates and surface silanols was crucial for synergistic hydrosilylation catalysis. A carbonate and silanol concertedly activated the silane and aldehyde for efficient hydride transfer. Density functional theory calculations on a model reaction system demonstrated that both the carbonate and silanol contributed to the stabilization of the transition state of hydride transfer, which resulted in a reasonable barrier height of 16.8 kcal mol-1. Furthermore, SiO2/carbonate(C4) enabled the hydrosilylation of an aldehyde with an amino group without catalyst poisoning, owing to the weak acidity of surface silanols, in sharp contrast to previously developed acid catalysts. This study demonstrates that immobilization on a solid support can convert inactive organic molecules into active and heterogeneous organocatalysts.

Organocatalytic Polymers from Affordable and Readily Available Building Blocks for the Cycloaddition of CO2 to Epoxides

The catalytic cycloaddition of CO₂ to epoxides to afford cyclic carbonates as useful monomers, intermediates, solvents, and additives is a continuously growing field of investigation as a way to carry out the atom-economic conversion of CO₂ to value-added products. Metal-free organocatalytic compounds are attractive systems among various catalysts for such transformations because they are inexpensive, nontoxic, and readily available. Herein, we highlight and discuss key advances in the development of polymer-based organocatalytic materials that match these requirements of affordability and availability by considering their synthetic routes, the monomers, and the supports employed. The discussion is organized according to the number (monofunctional versus bifunctional materials) and type of catalytically active moieties, including both halide-based and halide-free systems. Two general synthetic approaches are identified based on the postsynthetic functionalization of polymeric supports or the copolymerization of monomers bearing catalytically active moieties. After a review of the material syntheses and catalytic activities, the chemical and structural features affecting catalytic performance are discussed. Based on such analysis, some strategies for the future design of affordable and readily available polymer-based organocatalysts with enhanced catalytic activity under mild conditions are considered.

Designing Sites in Heterogeneous Catalysis: Are We Reaching Selectivities Competitive With Those of Homogeneous Catalysts?

A critical review of different prominent nanotechnologies adapted to catalysis is provided, with focus on how they contribute to the improvement of selectivity in heterogeneous catalysis. Ways to modify catalytic sites range from the use of the reversible or irreversible adsorption of molecular modifiers to the immobilization or tethering of homogeneous catalysts and the development of well-defined catalytic sites on solid surfaces. The latter covers methods for the dispersion of single-atom sites within solid supports as well as the use of complex nanostructures, and it includes the post-modification of materials via processes such as silylation and atomic layer deposition. All these methodologies exhibit both advantages and limitations, but all offer new avenues for the design of catalysts for specific applications. Because of the high cost of most nanotechnologies and the fact that the resulting materials may exhibit limited thermal or chemical stability, they may be best aimed at improving the selective synthesis of high value-added chemicals, to be incorporated in organic synthesis schemes, but other applications are being explored as well to address problems in energy production, for instance, and to design greener chemical processes. The details of each of these approaches are discussed, and representative examples are provided. We conclude with some general remarks on the future of this field.

Engineering of Polystyrene-Supported Acid-Base Catalysts for Aldol Condensation in Water

Aldol reaction in water can effectively limit the formation of Schiff bases that deactivate active amine sites. To date, regulation of cooperative behaviors and morphologies of polymer-supported acid-base catalysts remains...

NMR relaxation time measurements of solvent effects in an organocatalysed asymmetric aldol reaction over silica SBA-15 supported proline

The behaviour of solvents in solid-supported proline organocatalysts is explored using NMR relaxation measurements coupled with reaction screening. Solvents with a lower affinity for the solid surface lead to a higher reactivity.

Porous Silica-Based Organic-Inorganic Hybrid Catalysts: A Review

Hybrid organic-inorganic catalysts have been extensively investigated by several research groups in the last decades, as they allow combining the structural robust-ness of inorganic solids with the versatility of organic chemistry. Within the field of hybrid catalysts, synthetic strategies based on silica are among the most exploitable, due to the convenience of sol-gel chemistry, to the array of silyl-derivative precursors that can be synthesized and to the number of post-synthetic functionalization strategies available, amongst others. This review proposes to highlight these advantages, firstly describing the most common synthetic tools and the chemistry behind sol-gel syntheses of hybrid catalysts, then presenting exemplificative studies involving mono- and multi-functional silica-based hybrid catalysts featuring different types of active sites (acid, base, redox). Materials obtained through different approaches are described and their properties, as well as their catalytic performances, are compared. The general scope of this review is to gather useful information for those approaching the synthesis of organic-inorganic hybrid materials, while providing an overview on the state-of-the art in the synthesis of such materials and highlighting their capacities.

Tuning acid–base cooperativity to create bifunctional fiber catalysts for one-pot tandem reactions in water

A simple and straightforward route to create acid–base bifunctional fiber catalysts for efficient one-pot tandem deprotection-Knoevenagel reactions in water.

Control of interfacial pH in mesoporous silica nanoparticles via surface functionalization

The pH at silica-water interfaces (pH_int) was measured by grafting a dual emission fluorescent probe (SNARF) onto the surface of mesoporous silica nanoparticles (MSN). The values of pH_int of SNARF-MSN suspended in water were different from the pH of the bulk solution (pH_bulk). The addition of acid or base to aqueous suspensions of SNARF-MSN induced much larger changes in pH_bulk than pH_int, indicating that the interface has buffering capacity. Grafting additional organic functional groups onto the surface of SNARF-MSN controls the pH_int of its buffering region. The responses of pH_int to variations in pH_bulk are consistent with the acid/base properties of the surface groups as determined by their pK_a and are affected by electrostatic interactions between charged interfacial species as evidenced by the dependence of ζ-potential on pH_bulk. Finally, as a proof of principle, we demonstrate that the hydrolysis rate of an acid-sensitive acetal can be controlled by adjusting pH_int via suitable functionalization of the MSN surface. Our findings can lead to the development of nanoreactors that protect sensitive species from adverse conditions and tune their chemical reactivity.

Cooperative acid–base bifunctional ordered porous solids in sequential multi-step reactions: MOF vs. mesoporous silica

Two different catalytic platforms, MOF and mesoporous silica, were compared as porous support for basic amino groups to promote sequential multi-step reactions.

Site-averaged kinetics for catalysts on amorphous supports: an importance learning algorithm

We combine importance sampling and kernel regression techniques to efficiently predict site-averaged kinetics for isolated catalyst sites on amorphous supports.

Fluorescence spectroscopy studies of crossed aldol reactions: a reactive Nile red dye reveals catalyst-dependent product formation

A highly fluorescent, aldol-reactive derivative of the dye Nile red is synthesized and evaluated as an in situ probe of crossed aldol reactions.

Multifunctional Catalytic Surface Design for Concerted Acceleration of One-Pot Hydrosilylation-CO2 Cycloaddition

Silica-supported Rh-ammonium iodide catalyst showed high performance for hydrosilylation-CO₂ cycloaddition reaction sequences. The catalyst was prepared by surface grafting of Rh and the silane-coupling reaction of the ammonium iodide moiety. The acceleration of each catalytic reaction was realized due to the concerted catalysis between Rh species, immobilized organic functions, and surface Si-OH groups. As a result, good to excellent yields of silyl carbonates were obtained from epoxyolefins, hydrosilanes, and CO₂ under mild reaction conditions.

Catalyst Stability Assessment in a Lab-Scale Liquid-Solid (LS)² Plug-Flow Reactor

A packed-bed plug-flow reactor, denoted as the lab-scale liquid-solid (LS)² reactor, has been developed for the assessment of heterogeneous catalyst deactivation in liquid-phase reactions. The possibility to measure intrinsic kinetics was first verified with the model transesterification of ethyl acetate with methanol, catalyzed by the stable commercial resin Lewatit K2629, for which a turnover frequency (TOF) of 6.2 ± 0.4 × 10−3 s−1 was obtained. The absence of temperature and concentration gradients was verified with correlations and experimental tests. The potential for assessing the deactivation of a catalyst was demonstrated by a second intrinsic kinetics evaluation where a methylaminopropyl (MAP)-functionalized mesoporous silica catalyst was used for the aldol reaction of acetone with 4-nitrobenzaldehyde in different solvents. The cooperative MAP catalyst deactivated as a function of time on stream when using hexane as solvent. Yet, the monofunctional MAP catalyst exhibited stable activity for at least 4 h on stream, which resulted in a TOF of 1.2 ± 0.1 × 10−3 s−1. It did, however, deactivate with dry acetone or DMSO as solvent due to the formation of site-blocking species. This deactivation was mitigated by co-feeding 2 wt % of water to DMSO, resulting in stable catalyst activity.

Inter- and Intramolecular Cooperativity Effects in Alkanolamine-Based Acid-Base Heterogeneous Organocatalysts

Intramolecular cooperativity in heterogeneous organocatalysts is investigated using alkanolamine-functionalized silica acid-base catalysts for the aldol condensation reaction of 4-nitrobenzaldehyde and acetone. Two series of catalysts, one with and one without silanol-capping, are synthesized with varied alkyl linker lengths (two to five) connecting secondary amine and terminal hydroxyl functionalities. The reactivity of these catalysts is assessed to determine the relative potential for intermolecular (silane amine-surface silanol) vs intramolecular (amine-hydroxyl within a single silane) cooperativity, the impact of inhibitory surface-silane interactions, and the role of alkyl linker length and flexibility. For the array of catalysts tested, those with longer linker lengths generally give increased catalytic activity, although the turnover frequency trends differ between catalysts with and without surface silanol capping. Catalysts with alkyl-substituted amines lacking a terminal hydroxyl demonstrate an adverse effect of chain length, where the larger alkyl substituent on the amine provides steric hindrance depressing catalytic activity, while giving additional evidence for improved rates afforded by intramolecular cooperativity in the alkanolamine materials. The silanol-capped alkanolamine catalyst with the longest alkyl linker is found to be the most active alkanolamine catalyst due to its hydrophobized surface, which removes hypothesized silanol-alkanolamine inhibitory interactions, with the sufficient length and flexibility of its amine-hydroxyl linker allowing for favorable conformations for cooperativity. This study demonstrates the feasibility of and important factors affecting intramolecular cooperative activity in acid-base heterogeneous organocatalysis.

Efficient bifunctional reactivity of K-doped CrO(OH) nanosheets: exploiting the combined role of Cr(iii) and surface –OH groups in tandem catalysis

Layered K-α-CrO(OH) nanosheets as a non-noble metal based tandem catalyst for sequential oxidation and coupling/condensation reactions.

Synthesis of discrete catalytic oligomers and their potential in silica-supported cooperative catalysis

The synthesis of discrete catalytic oligomers and their potential in supported cooperative catalysis are presented.

Kinetic evaluation of chitosan-derived catalysts for the aldol reaction in water

The reaction rate and stability of chitosan as heterogeneous amine catalyst is quantified in a batch and continuous-flow aldol reaction.