Visible-light-responsive sulfated vanadium-doped TS-1 with hollow structure: Enhanced photocatalytic activity in selective oxidation of cyclohexane

Controllable Synthesis of Titanium Silicon Molecular Zeolite Nanosheet with Short b-Axis Thickness and Application in Oxidative Desulfurization

Titanium silicon molecular zeolite (TS-1) plays an important role in catalytic reactions due to its unique nanostructure. The straight channel on TS-1 was parallel to the orientation of the short b-axis and directly exposed to the aperture of the 10-member ring with a diameter of 0.54 nm × 0.56 nm. This structure could effectively reduce the diffuse restriction of bulk organic compounds during the oxidative desulfurization process. As a kind of cationic polymer electrolyte, polydimethyldiallyl ammonium chloride (PDDA) contains continuous [C8H16N+Cl-] chain segments, in which the Cl- could function as an effective structure-directing agent in the synthesis of nanomaterials. The chain of PDDA could adequately interact with the [0 1 0] plane in the preparation process of zeolite, and then the TS-1 nanosheet with short b-axis thickness (6 nm) could be obtained. The pore structure of the TS-1 nanosheet is controlled by regulating the content of PDDA. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), N2 physical adsorption analysis, infrared absorption spectrum and ultraviolet-visible spectrum were used to determine the TS-1. The thinner nanosheets exhibit excellent catalytic performance in oxidative desulfurization of dibenzothiophene (DBT), in which the removal rate could remain at 100% after three recycles. Here, the TS-1 nanosheet with short b-axis thickness has a promising future in catalytic reactions.

TS-1@MCM-48 Core-Shell Catalysts for Efficient Oxidation of p-Diethylbenzene to High Value-Added Derivatives

To expand the market capacity of p-diethylbenzene (PDEB), core-shell zeolite (TS-1@MCM-48) is designed as a catalyst for PDEB oxidation. TS-1@MCM-48 catalyst is synthesized by in-situ crystallization method and characterized by X-ray diffraction (XRD), transmission electron microscope (TEM), scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS), N2 adsorption-desorption, in-situ electron paramagnetic resonance (EPR) and 29Si nuclear magnetic resonance (29Si MAS-NMR). Oxidation of PDEB by H2O2 was investigated systematically in liquid phase. The conversion of PDEB over TS-1@MCM-48 was 28.1 % and the total selectivity was 72.6 %, where the selectivity of EAP (p-ethylacetophenone) and EPEA (4-ethyl-α-methylbenzyl alcohol) was 28.6 % and 44.0 %, respectively. Compared with TS-1 and MCM-48 zeolite, the conversion rate of reactants and the selectivity of products have been significantly improved. The catalytic performance of TS-1@MCM-48 is derived from its well-crystallized microporous core and mesoporous shell with regular channels, which make active sites of TS-1 zeolite in the catalyst be fully utilized and mass transfer resistance be largely reduced. Further through theoretical calculation, we propose that the oxidation of PDEB is the result of the combination and mutual transformation of free radical process and carbocation process. Core-shell structure ensures the conversion rate of raw materials and improves the selectivity of products.

Continuous air purification by front flow photocatalytic reactor: Modelling of the influence of mass transfer step under simulated real conditions

In this work, a solution for the treatment of toxic gases based on a photocatalytic process using TiO₂ coated on a cellulosic support, has been investigated. Here, cyclohexane was chosen as the reference for testing its removal efficiency via a continuous front flow reactor as type A anti-gas filters. The photocatalytic support was firstly characterized by EDX, to confirm its elemental composition. Then, the experiments were carried out, starting with a batch reactor in order to evaluate the degradation efficiency of the photocatalytic media, as well as the monitoring of the photocatalytic process which allowed the establishing of a carbon mass balance corresponding to the stoichiometric number of our target pollutant. The transition to a continuous treatment with a front flow reactor aims to highlight the influence of the input concentration (0.29-1.78 mM m^-3) under different flow rates (12, 18 and 36 L min^-1). The relative humidity effect was also investigated (from 5 to 90% of humidity) where an optimum rate was obtained around 35-45%. In addition, the mineralization rate was monitored. The major rates obtained were for a cyclohexane input concentration of 0.29 mM m^-3 in wet condition (38%) at an air flow rate of 18 L min^-1, where the CO₂ selectivity reached 77% for an abatement of 62%. In order to understand the limiting steps of the photocatalytic process, a model considering the reactor geometry and the hydraulic flow was developed. The obtained results showed that the mass transfer must be considered in the photocatalytic process for a continuous treatment. The Langmuir-Hinshelwood bimolecular model was also developed to represent the influence of the humidity.

Oxido- and Dioxido-Vanadium(V) Complexes Supported on Carbon Materials: Reusable Catalysts for the Oxidation of Cyclohexane

Oxidovanadium(V) and dioxidovanadium(V) compounds, [VO(OEt)L] (1) and [Et3NH][VO2L] (2), were synthesized using an aroylhydrazone Schiff base (5-bromo-2-hydroxybenzylidene)-2-hydroxybenzohydrazide (H2L). They were characterized by elemental analysis, Fourier-transform infrared spectroscopy (FT-IR), (1H and 51V) nuclear magnetic resonance (NMR), electrospray ionization mass spectrometry (ESI-MS) and single crystal X-ray diffraction analyses. Both complexes were immobilized on functionalized carbon nanotubes and activated carbon. The catalytic performances of 1 and 2, homogenous and anchored on the supports, were evaluated for the first time towards the MW-assisted peroxidative oxidation (with tert-butylhydroperoxide, TBHP) of cyclohexane under heterogeneous conditions. The immobilization of 1 and 2 on functionalized carbon materials improved the efficiency of catalytic oxidation and allowed the catalyst recyclability with a well-preserved catalytic activity.

The Clean Synthesis of Small-Particle TS-1 with High-Content Framework Ti by Using NH4HCO3 and Suspended Seeds as an Assistant

The synthesis of a TS-1 zeolite with high-content framework Ti and small particles has been developed by adding NH₄HCO₃ and suspended seeds as an assistant. With the addition of NH₄HCO₃, the Hofmann decomposition of the tetrapropylammonium cation (TPA⁺) decreased, and the framework Ti content of the zeolite increased first and then decreased while the particle became larger. With the assistance of suspended seeds, the TS-1 synthesized under a low-alkalinity system possesses small particle size and high-content framework Ti, and it shows the best catalytic activity among the prepared catalysts. Because the decomposition of TPA⁺ decreased, the mother liquid could be reused in the next run of preparation. Even though the recycled mother liquid was reused five times, all obtained TS-1 samples exhibited similar catalytic performances in propylene epoxidation. This work provides an efficient process for preparing TS-1 with good catalytic performance and reduces the discharge of the waste liquid.

Direct cyclohexanone oxime synthesis via oxidation-oximization of cyclohexane with ammonium acetate

An unexpected cascade reaction for oxidation-oximization of cyclohexane with ammonium acetate was developed for the first time to access cyclohexanone oxime with 50.7% selectivity (13.6% conversion). Tetrahedral Ti sites in Ni-containing hollow titanium silicalite can serve as bifunctional catalytic centers in the reaction. This methodology not only provides a direct approach to prepare cyclohexanone oxime, but also simplifies process chemistry. Various available nitrogen sources, such as ammonium salt and even ammonia can be used as starting materials.

Improved Ti species distribution and hierarchical pores in TS-1: towards regeneration of TS-1 deactivated due to alkali corrosion

TS-1 deactivated in industrial cyclohexanone ammoximation can be effectively regenerated by hydrothermal treatment with TPABr and ethanolamine solution.

Modifications of heterogeneous photocatalysts for hydrocarbon C–H bond activation and selective conversion

This feature article summarizes the recent progress in the modification of heterogeneous photocatalysts for photocatalytic hydrocarbons’ C–H bond activation.

Site-specific catalytic activities to facilitate solvent-free aerobic oxidation of cyclohexylamine to cyclohexanone oxime over highly efficient Nb-modified SBA-15 catalysts

The development of highly active and selective heterogeneous catalysts for efficient oxidation of cyclohexylamine to cyclohexanone oxime is a challenge associated with the highly sensitive nitrogen center of cyclohexylamine.

Quantitative analysis of sesquiterpenes and comparison of three Curcuma wenyujin herbal medicines by micro matrix solid phase dispersion coupled with MEEKC

A simple, efficient and environmental friendly method was proposed for determining five sesquiterpenoids of Curcuma wenyujin by MSPD extraction coupled with MEEKC separation. Molecular sieve was applied as a solid support for extraction of sesquiterpenoids for the first time. Various parameters affecting extraction and separation efficiency were investigated. The optimized conditions involved dispersing sample (200 mg) with 200 mg of TS-1 for 150 s and using 1000 μL of methanol to elute five target analytes. Finally, they were well separated by using a running buffer containing 1.3% SDS, 5.0% 1-butanol, 0.5% ethyl acetate and 10% acetonitrile in 10 mM borate buffer at pH 9.0. Consequently, the developed method was fully validated and successfully applied to determine the five sesquiterpenoids including curdine, curcumenol, germacrone, furanodiene and β-elemene in Curcuma wenyujin origin's Chinese herbal medicines. Furthermore, hierarchical cluster analysis was performed based on the contents of target compounds for distinguishing steamed and non-steamed drugs. The present study provided a promising method for fast investigation and discrimination of chemical difference in steam & non-steamed Chinese medicines from Curcuma wenyujin origin.

Direct Hydroxylation of Benzene to Phenol over TS-1 Catalysts

We synthesized a TS-1 catalyst to directly hydroxylate benzene to phenol with H2O2 as oxidant and water as solvent. The samples were characterized by FT-IR (Fourier Transform Infrared), DR UV-Vis (Diffused Reflectance Ultraviolet Visible), XRD (X-ray diffraction), SEM(scanning electron microscope), TEM (Transmission Electron Microscope), XPS (X-ray photoelectron spectroscopy), ICP (inductively coupled plasma spectrum), and N2 adsorption-desorption. A desirable phenol yield of 39% with 72% selectivity was obtained under optimized conditions: 0.15 g (0.34 to the mass of benzene) TS-1, 5.6 mmol C6H6, reaction time 45 min, 0.80 mL H2O2 (30%), 40.0 mL H2O, and reaction temperature 70 °C. The reuse of the TS-1 catalyst illustrated that the catalyst had a slight loss of activity resulting from slight Ti leaching from the first run and then kept stable. Almost all of the Ti species added in the preparation were successfully incorporated into the TS-1 framework, which were responsible for the good catalytic activity. Extraframework Ti species were not selective for hydroxylation.

Solvothermal synthesis of CdIn2S4 photocatalyst for selective photosynthesis of organic aromatic compounds under visible light

Ternary chalcogenide semiconductor, cadmium indium sulfide (CdIn₂S₄), was prepared by a simple solvothermal method using ethylene glycol as a solvent, as well as indium chloride tetrahydrate (InCl₃^.4H₂O), cadmium nitrate tetrahydrate [Cd(NO₃)₂^.4H₂O], and thiacetamide (TAA) as precursors. The resulted sample was subject to a series of characterizations. It is the first time to use CdIn₂S₄ sample as a visible light-driven photocatalyst for simultaneous selective redox transformation of organic aromatic compounds. The results indicate that the as-synthesized CdIn₂S₄ photocatalyst not only has excellent photocatalytic performance compared with pure In₂S₃ and CdS for the selective oxidation of aromatic alcohols in an oxygen environment, but also shows high photocatalytic redox activities under nitrogen atmosphere. A possible mechanism for the photocatalytic redox reaction in the coupled system was proposed. It is hoped that our current work could extend the applications of CdIn₂S₄ photocatalyst and provide new insights for selective transformations of organic compounds.

CdS–MoS2 heterostructures on Mo substrates via in situ sulfurization for efficient photoelectrochemical hydrogen generation

CdS–MoS₂ photoelectrode with a double layers core shell structure was prepared on Mo substrate through using a simple electrodeposition and– in situ sulfurization method on Mo substrate.

One-Pot Template-Free Synthesis of Cu-MOR Zeolite toward Efficient Catalyst Support for Aerobic Oxidation of 5-Hydroxymethylfurfural under Ambient Pressure

Supported catalysts are widely studied, and exploring new promising supports is significant to access more applications. In this work, novel copper-containing MOR-type zeolites Cu-MOR were synthesized in a one-pot template-free route and served as efficient supports for vanadium oxide. In the heterogeneous oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-diformylfuran (DFF) with molecular oxygen (O2) under ambient pressure, the obtained catalyst demonstrated high yield (91.5%) and good reusability. Even under the ambient air pressure, it gave a DFF yield of 72.1%. Structure-activity relationship analysis indicated that the strong interaction between the framework Cu species and the guest V sites accounted for the remarkable performance. This work reveals that the Cu-MOR zeolite uniquely acts as the robust support toward well-performed non-noble metal heterogeneous catalyst for biomass conversion.