Control of Pd catalyst selectivity with mixed thiolate monolayers

Multiple Roles of Alkanethiolate-Ligands in Direct Formation of H2 O2 over Pd Nanoparticles

Coadsorbed organic species including thiolates can promote direct synthesis of hydrogen peroxide from H₂ and O₂ over Pd particles. Here, density functional theory based kinetic modeling, augmented with activity measurements and vibrational spectroscopy are used to provide atomistic understanding of direct H₂ O₂ formation over alkylthiolate(RS) Pd. We find that the RS species are oxidized during reaction conditions yielding RSO₂ as the effective ligand. The RSO₂ ligand shows superior ability for proton transfer to the intermediate surface species OOH, which accelerates the formation of H₂ O₂ . The ligands promote the selectivity also by blocking sites for unselective water formation and by modifying the electronic structure of Pd. The work rationalizes observations of enhanced selectivity of direct H₂ O₂ formation over ligand-funtionalized Pd nanoparticles and shows that engineering of organic surface modifiers can be used to promote desired hydrogen transfer routes.

Low temperature catalytic hydrodeoxygenation of lignin-derived phenols to cyclohexanols over the Ru/SBA-15 catalyst

Cyclohexanol and its derivatives are widely used as chemical intermediates and fuel additives. Herein, Ru/SBA-15 catalysts were prepared via impregnation, and used for the production of cyclohexanols from lignin-derived phenols. The catalyst samples were characterized by XRD, XPS, TEM, etc., where the Ru⁰ species was speculated as the active phase. 5 wt% Ru/SBA-15 with small Ru particle size (4.99 nm) and high Ru dispersion (27.05%) exhibited an excellent hydrogenation activity. A high cyclohexanol yield of >99.9% was achieved at 20 °C for 5 h in an aqueous phase, and the catalyst indicated stable activity and selectivity after five runs. Crucially, Ru/SBA-15 exhibited a zero-order reaction rate with an apparent activation energy (Ea) as low as 10.88 kJ mol⁻¹ and a TON of 172.84 at 80 °C. Simultaneously, demethoxylation activity was also observed in the hydrodeoxygenation (HDO) of G- and S-type monophenols, and a high yield of 37.4% of cyclohexanol was obtained at 80 °C and 4 h when using eugenol as substrate.

Ru/SBA-15 showed excellent activity for phenol to cyclohexanol at 20 °C and exhibited a zero-order character with low Ea of 10.88 kJ mol⁻¹. A high yield of 37.4% of cyclohexanol was obtained at 80 °C and 4 h when using eugenol as substrate.

Competing Reaction Pathways in Heterogeneously Catalyzed Hydrogenation of Allyl Cyanide: The Chemical Nature of Surface Species

We present a mechanistic study on the formation of an active ligand layer over Pd(111), turning the catalytic surface highly active and selective in partial hydrogenation of an α,β‐unsaturated aldehyde acrolein. Specifically, we investigate the chemical composition of a ligand layer consisting of allyl cyanide deposited on Pd(111) and its dynamic changes under the hydrogenation conditions. On pristine surface, allyl cyanide largely retains its chemical structure and forms a layer of molecular species with the CN bond oriented nearly parallel to the underlying metal. In the presence of hydrogen, the chemical composition of allyl cyanide strongly changes. At 100 K, allyl cyanide transforms to unsaturated imine species, containing the C=C and C=N double bonds. At increasing temperatures, these species undergo two competing reaction pathways. First, the C=C bond become hydrogenated and the stable N‐butylimine species are produced. In the competing pathway, the unsaturated imine reacts with hydrogen to fully hydrogenate the imine group and produce butylamine. The latter species are unstable under the hydrogenation reaction conditions and desorb from the surface, while the N‐butylimine adsorbates formed in the first reaction pathway remain adsorbed and act as an active ligand layer in selective hydrogenation of acrolein.

An experimental approach for controlling confinement effects at catalyst interfaces

Catalysts are conventionally designed with a focus on enthalpic effects, manipulating the Arrhenius activation energy. This approach ignores the possibility of designing materials to control the entropic factors that determine the pre-exponential factor. Here we investigate a new method of designing supported Pt catalysts with varying degrees of molecular confinement at the active site. Combining these with fast and precise online measurements, we analyse the kinetics of a model reaction, the platinum-catalysed hydrolysis of ammonia borane. We control the environment around the Pt particles by erecting organophosphonic acid barriers of different heights and at different distances. This is done by first coating the particles with organothiols, then coating the surface with organophosphonic acids, and finally removing the thiols. The result is a set of catalysts with well-defined "empty areas" surrounding the active sites. Generating Arrhenius plots with >300 points each, we then compare the effects of each confinement scenario. We show experimentally that confining the reaction influences mainly the entropy part of the enthalpy/entropy trade-off, leaving the enthalpy unchanged. Furthermore, we find this entropy contribution is only relevant at very small distances (<3 Å for ammonia borane), where the "empty space" is of a similar size to the reactant molecule. This suggests that confinement effects observed over larger distances must be enthalpic in nature.

Role of tungsten modifiers in bimetallic catalysts for enhanced hydrodeoxygenation activity and selectivity

Addition of tungsten to supported platinum catalysts increased the rate of benzyl alcohol hydrodeoxygenation via a bifunctional mechanism, whereas undesirable decarbonylation was suppressed due to blocking of platinum terrace sites.

Molecular beam/infrared reflection-absorption spectroscopy apparatus for probing heterogeneously catalyzed reactions on functionalized and nanostructured model surfaces

A new custom-designed ultrahigh vacuum (UHV) apparatus combining molecular beam techniques and in situ surface spectroscopy for reactivity measurements on complex nanostructured model surfaces is described. It has been specifically designed to study the mechanisms, kinetics, and dynamics of heterogeneously catalyzed reactions over well-defined model catalysts consisting of metal nanoparticles supported on thin oxide films epitaxially grown on metal single crystals. The reactivity studies can be performed in a broad pressure range starting from UHV up to the ambient pressure conditions. The UHV system includes (i) a preparation chamber providing the experimental techniques required for the preparation and structural characterization of single-crystal based model catalysts such as oxide supported metal particles or ordered oxide surfaces and (ii) the reaction chamber containing three molecular beams-two effusive and one supersonic, which are crossed at the same point on the sample surface, infrared reflection-absorption spectroscopy for the detection of surface-adsorbed species, and quadrupole mass spectrometry for gas phase analysis. The supersonic beam is generated in a pulsed supersonic expansion and can be modulated via a variable duty-cycle chopper. The effusive beams are produced by newly developed compact differentially pumped sources based on multichannel glass capillary arrays. Both effusive sources can be modulated by a vacuum-motor driven chopper and are capable of providing high flux and high purity beams. The apparatus contains an ambient pressure cell, which is connected to the preparation chamber via an in situ sample transfer system and provides an experimental possibility to study the reactivity of well-defined nanostructured model catalysts in a broad range of pressure conditions-up to ambient pressure-with the gas phase analysis based on gas chromatography. Additionally, a dedicated deposition chamber is connected to the preparation chamber, which is employed for the in situ functionalization of model surfaces with large organic molecules serving as promoters or modifiers of chemical reactions. We present a general overview of the apparatus as well as a description of the individual components and their interplay. The results of the test measurements involving the most important components are presented and discussed.

Partial Hydrogenation of Unsaturated Carbonyl Compounds: Toward Ligand-Directed Heterogeneous Catalysis

In this Perspective, we report on the recent progress in atomistic-level understanding of selective partial hydrogenation of α,β-unsaturated carbonyl compounds, particularly acrolein, toward unsaturated alcohols over model single crystalline and nanostructured Pd catalysts. This reaction was observed to proceed with nearly 100% selectivity over Pd(111) but not over supported Pd nanoparticles. The origin of the high selectivity was related to formation of a dense overlayer of oxopropyl surface species occurring at the early reaction stages via partial hydrogenation of the C=C bond in acrolein with only one H atom. This oxopropyl overlayer strongly modifies the adsorption and reactive properties of Pd(111), turning it 100% selective toward C=O bond hydrogenation. The underlying reaction mechanism represents a particular case of ligand-directed heterogeneous catalysis, in which the surface adsorbates do not directly participate in the catalytic process as the reaction intermediates but strongly affect the elementary reaction steps via specific adsorbate-adsorbate interactions.

Thermodynamics of Alkanethiol Self-Assembled Monolayer Assembly on Pd Surfaces

We investigate the structure and binding energy of alkanethiolate self-assembled monolayers (SAMs) on Pd (111), Pd (100), and Pd (110) facets at different coverages. Dispersion-corrected density functional theory calculations are used to correlate the binding energy of alkanethiolates with alkyl chain length and coverage. The equilibrium coverage of thiolate layers strongly prefers 1/3 monolayer (ML) on the Pd (111) surface. The coverage of thiolates varies with chemical potential on Pd (100) and Pd (110), increasing from 1/3 to 1/2 ML on (100) and from 1/4 to 1/2 ML on (110) as the thiol chemical potential is increased. Higher coverages are driven by attractive dispersion interactions between the extended alkyl chains, such that transitions to higher coverages occur at lower thiol chemical potentials for longer chain thiolates. Stronger adsorption to the Pd (100) surface causes the equilibrium Wulff construction of Pd particles to take on a cubic shape upon saturation with thiols. The binding of H, O, and CO adsorbates is weakened as the thiolate coverage is increased, with saturation coverages causing unfavorable binding of O and CO on Pd (100) and weakened binding on other facets. Temperature-dependent CO diffuse reflectance infrared Fourier transform spectroscopy experiments are used to corroborate the weakened binding of CO in the presence of thiolate SAMs of varying surface density. Preliminary results of multiscale modeling efforts on the Pd-thiol system using a reactive force field, ReaxFF, are also discussed.

Selective hydrogenation of unsaturated aldehydes over Pt nanoparticles promoted by the cooperation of steric and electronic effects

The selective hydrogenation of α,β-unsaturated aldehydes to unsaturated alcohols can reach high selectivity and activity at room temperature using Pt nanoparticles immobilized on a non-porous Al₂O₃ support stabilized by aspartic acid.

Rh nanoparticles from thiolate dimers: selective and reusable hydrogenation catalysts in ionic liquids

Thiolate-capped RhNPs in imidazolium-based ionic liquids were synthesized from [Rh(μ-SR)(COD)]₂ dimmers under H₂ pressure without external addition of ligand stabilizers, preserving thiolate integrity on the nanoparticle surface. This nanoparticulated systems showed a remarkable selectivity that led to their application in the one pot reductive N-alkylation to produce amines.

Composition-Dependent Morphology of Bi- and Trimetallic Phosphides: Construction of Amorphous Pd-Cu-Ni-P Nanoparticles as a Selective and Versatile Catalyst

Amorphous materials have been widely researched in heterogeneous catalysis and for next-generation batteries. However, the well-defined production of high-quality (e.g., monodisperse and high surface area) amorphous alloy nanomaterials has rarely been reported. In this work, we investigated the correlations among the composition, morphology, and catalysis of various Pd-M-P nanoparticles (NPs) (M = Cu or Ni), which indicated that less Cu (≤20 atom %) was necessary for the formation of an amorphous morphology. The amorphous Pd-Cu-Ni-P NPs were fabricated with a controllable size and characterized carefully, which show excellent selective catalysis in the semihydrogenation of alkynes, hydrogenation of quinoline, and oxidation of primary alcohols. The uniqueness of the catalytic performance was confirmed by control experiments with monometallic Pd, amorphous Pd-Ni-P NPs, crystalline Pd-Cu-P NPs, and a crystalline counterpart of Pd-Cu-Ni-P catalyst. The catalytic selectivity likely arose from improved Pd-M (M = Cu or Ni) synergistic effects in the amorphous phase and the electron deficiency of Pd. The model reactions proceeded under H₂ or O₂ gas without any additives, bases, or metal oxide supports, and the catalyst could be reused several times. This report is expected to shed light on the design of amorphous alloy nanomaterials as green and inexpensive catalysts for atom-economic and selective reactions.