Polymer nanofilm-coated catalysis: An approach for enhancing water-resistance of Co-Fe oxide nano-catalysts under moisture-rich condition

Effect of Sn on the CO Catalytic Activity and Water Resistance of Cu-Mn Catalyst

In view of the problem that excessive CO in underground coal mine space can easily lead to a large number of casualties, Cu-Mn-Sn water-resistant eliminators with different Sn contents were prepared by a co-precipitation method. The activity of the eliminators was analyzed by using an independently developed activity testing platform, N₂ adsorption and desorption, XRD, SEM, XPS, and FTIR to characterize the activity factors and water resistance. The results showed that Cu-Mn-Sn-20 with 20% Sn content had the highest activity, which was 3.23 times that of Cu-Mn. The main reason for the increased activity is that Cu-Mn-Sn-20 doped with 20% Sn provides a larger specific surface area and more active sites and reduces the pore size, so that the crystallization degree of Cu_1.4Mn_1.5O₄ is lower. The doping of 20% Sn reduces the absorption of lattice water and coordination water and improves the water resistance of Cu-Mn-Sn-type eliminators. The Cu-Mn-Sn-20 water-resistant eliminator is used to quickly eliminate CO in underground coal mines, which is of great significance for the rescue workers in underground coal mines after disasters.

Fabrication of MnCoOx composite oxides for catalytic CO oxidation via a solid-phase synthesis: The significant effect of manganese precursor

A series of Mn3Co16Ox composite oxides catalysts were fabricated via a solid-phase synthesis using different manganese precursors (namely as manganese acetate (A), nitrate (N), and sulfate (S)). It has been...

A catalyst powder-based spraying approach for rapid and efficient removal of fire-generated CO：From laboratory to pilot scale

In confined space fires, the large amount of CO generated by incomplete combustion of carbon-based materials poses a serious threat to the trapped people. However, the efficient method of removing CO in such disasters remains a great challenge. Herein, a spraying catalyst powder (SCP) approach is proposed for CO removal by oxidizing CO to harmless CO₂. Cu/Mn catalyst, synthesized by using ethylene glycol as solvent, was employed in this study. The influence of catalyst concentration, temperature, CO₂ concentration and initial CO concentration on CO removal performance of SCP approach was investigated. With 500 g/m³ catalyst, 25,000 ppm CO could be reduced to 2550 ppm within 1 min and completely removed in less than 2.83 min at 200 °C. The feasibility of SCP approach in practical application was validated by the remarkable CO removal performance for charcoal combustion in confined tunnel. SCP approach could effectively reduce the CO concentration, which would reach up to 12,659 ppm in the absence of SCP approach, to less than 1500 ppm within 30 min. The experiment results suggest that SCP technology can effectively remove the fire-generated CO and is promising for practical application in crowded occupancies, such as underground space and aircraft compartment.

Crystal Facet Induced Single-Atom Pd/Cox Oy on a Tunable Metal-Support Interface for Low Temperature Catalytic Oxidation

Atomic dispersed metal sites in single-atom catalysts are highly mobile and easily sintered to form large particles, which deteriorates the catalytic performance severely. Moreover, lack of criterion concerning the role of the metal-support interface prevents more efficient and wide application. Here, a general strategy is reported to synthesize stable single atom catalysts by crafting on a variety of cobalt-based nanoarrays with precisely controlled architectures and compositions. The highly uniform, well-aligned, and densely packed nanoarrays provide abundant oxygen vacancies (17.48%) for trapping Pd single atoms and lead to the creation of 3D configured catalysts, which exhibit very competitive activity toward low temperature CO oxidation (100% conversion at 90 °C) and prominent long-term stability (continuous conversion at 60 °C for 118 h). Theoretical calculations show that O vacancies at high-index {112} facet of Co_x O_y nanocrystallite are preferential sites for trapping single atoms, which guarantee strong interface adhesion of Pd species to cobalt-based support and play a pivotal role in preventing the decrement of activity, even under moisture-rich conditions (≈2% water vapor). The progress presents a promising opportunity for tailoring catalytic properties consistent with the specific demand on target process, beyond a facile design with a tunable metal-support interface.

Combustion of lean methane over Co3O4 catalysts prepared with different cobalt precursors

To investigate the effect of catalyst precursors on physicochemical properties and activity of lean methane catalytic combustion, a series of Co3O4 catalysts were prepared via a precipitation method by using four different cobalt precursors: Co(C2H3O2)2, Co(NO3)2, CoCl2, and CoSO4. The catalysts were characterized by BET, XRD, SEM, Raman, XPS, XRF, O2-TPD and H2-TPR techniques. It was found that the different types of cobalt precursor had remarkable effects on the surface area, particle size, reducibility and catalytic performance. In contrast, the Co3O4-Ac catalyst showed a relatively small surface area, but its activity and stability were the highest. XPS, Raman, O2-TPD and H2-TPR results demonstrated that the superior catalytic performance of Co3O4-Ac was associated with its higher Co2+ concentration, more surface active oxygen species and better reducibility. In addition, the activity of the Co3O4-S catalyst reduced significantly due to the residual impurity SO4 2-, which could reduce the concentration of surface adsorbed active oxygen species and inhibit oxygen migration.

Self-assembly of a highly stable and active Co3O4/H-TiO2 bulk heterojunction with high-energy interfacial structures for low temperature CO catalytic oxidation

Self-assembly of a highly stable and active Co₃O₄/H-TiO₂ bulk heterojunction with high-energy interfacial structures was realized for low temperature CO catalytic oxidation.

Template-free Synthesis of Stable Cobalt Manganese Spinel Hollow Nanostructured Catalysts for Highly Water-Resistant CO Oxidation

Development of spinel oxides as low-cost and high-efficiency catalysts is highly desirable; however, rational synthesis of efficient and stable spinel systems with precisely controlled structure and components remains challenging. We demonstrate the design of complex nanostructured cobalt-based bimetallic spinel catalysts for low-temperature CO oxidation by a simple template-free method. The self-assembled multi-shelled mesoporous spinel nanostructures provide high surface area (203.5 m2/g) and favorable unique surface chemistry for producing abundant active sites and lead to the creation of robust microsphere configured by 16-nm spinel nanosheets, which achieve satisfactory water-resisting property and catalytic activity. Theoretical models show that O vacancies at exposed {110} facets in cubic spinel phase guarantee the strong adsorption of reactive oxygen species on the surface of catalysts and play a key role in the prevention of deactivation under moisture-rich conditions. The design concept with architecture and composition control can be extended to other mixed transition metal oxide compositions.