Ultrafine palladium-gold-phosphorus ternary alloyed nanoparticles anchored on ionic liquids-noncovalently functionalized carbon nanotubes with excellent electrocatalytic property for ethanol oxidation reaction in alkaline media

Water-soluble ionic carbon nitride as unconventional stabilizer for highly catalytically active ultrafine gold nanoparticles

Ultrafine metal nanoparticles (NPs) hold promise for applications in many fields, including catalysis. However, ultrasmall NPs are typically prone to aggregation, which often leads to performance losses, such as severe deactivation in catalysis. Conventional stabilization strategies (e.g., immobilization, embedding, or surface modification by capping agents) are typically only partly effective and often lead to loss of catalytic activity. Herein, a novel type of stabilizers based on water-soluble ionic (K+ and Na+ containing) polymeric carbon nitride (i.e., K,Na-poly(heptazine imide) = K,Na-PHI) is reported that enables effective stabilization of highly catalytically active ultrafine (size of ∼2-3 nm) gold NPs. Experimental and theoretical comparative studies using different structural units of K,Na-PHI (i.e., cyanurate, melonate, cyamelurate) indicate that the presence of functionalized heptazine moieties is crucial for the synthesis and stabilization of small Au NPs. The K,Na-PHI-stabilized Au NPs exhibit remarkable dispersibility and outstanding stability even in solutions of high ionic strength, which is ascribed to more effective charge delocalization in the large heptazine units, resulting in more effective electrostatic stabilization of Au NPs. The outstanding catalytic performance of Au NPs stabilized by K,Na-PHI is demonstrated using the selective reduction of 4-nitrophenol to 4-aminophenol by NaBH4 as a model reaction, in which they outperform even the benchmark "naked" Au NPs electrostatically stabilized by excess NaBH4. This work thus establishes ionic carbon nitrides (PHI) as alternative capping agents enabling effective stabilization without compromising surface catalysis, and opens up a route for further developments in utilizing PHI-based stabilizers for the synthesis of high-performance nanocatalysts.

Unveiling the effect of shapes and electrolytes on the electrocatalytic ethanol oxidation activity of self-standing Pd nanostructures

Morphologically controlled Pd-based nanocrystals are the most efficient strategies for improving the electrocatalytic ethanol oxidation reaction (EOR) performance; however, their morphological-EOR activity relationship and effect of electrolytes at a wide pH range are still ambiguous. Here, we have synthesized porous self-standing Pd clustered nanospheres (Pd-CNSs) and Pd nanocubes (Pd-NCBs) for the EOR in acidic (H₂SO₄), alkaline (KOH), and neutral (NaHCO₃) electrolytes compared to commercial spherical-like Pd/C catalysts. The fabrication process comprises the ice-cooling reduction of Pd precursor by sodium borohydride (NaBH₄) and l-ascorbic acid to form Pd-CNSs and Pd-NCBs, respectively. The EOR activity of Pd-CNSs significantly outperformed those of Pd-NCBs, and Pd/C in all electrolytes, but the EOR activity was better in KOH than in H₂SO₄ and NaHCO₃. This is due to the 3D porous clustered nanospherical morphology that makes Pd active centers more accessible and maximizes their utilization during EOR. The EOR specific/mass activities of Pd-CNSs reached (8.51 mA/cm²/2.39 A/mg_Pd) in KOH, (2.98 mA/cm²/0.88 A/mg_Pd) in H₂SO₄, and (0.061 mA/cm²/0.0083 A/mg_Pd) in NaHCO₃, in addition to stability after 1000 cycles. This study affirms that porous 3D spherical Pd nanostructures are preferred for the EOR than those of 0D spherical-like and multi-dimensional cube-like nanostructures.

Sulfur and phosphorus co-doping optimized electronic structure and modulated intermediate affinity on PdSP metallene for ethanol-assisted energy-saving H2 production

Coupling cathodic hydrogen evolution reaction (HER) and anodic electrochemical oxidation of organic small molecules in a co-electrolysis system could simultaneously realize high-value chemical generation and energy-saving hydrogen production, which, however, require high-performance electrocatalysts. In this work, we developed a one-step solvothermal method to synthesize S, P-co-doped Pd metallene (PdSP metallene) and employed it as a bifunctional electrocatalyst for both the HER and ethanol oxidation reaction (EOR). The co-doping of S and P atoms into Pd metallene could introduce multiple active sites and increase the electrochemically-active surface area. Moreover, the electronic interactions between Pd, S, and P atoms could regulate the electronic structure of the active sites and modulate the intermediate affinity on the resultant PdSP metallene, thus boosting the electrocatalytic HER and EOR performance. In the HER-EOR co-electrolysis system with bifunctional PdSP metallene electrocatalysts, only a 0.88 V of electrolysis voltage was required to fulfill 10 mA cm^-2 current density, much lower than that of pure water electrolysis (1.41 V) using the same electrocatalysts.

Quaternary PdCuNiP Porous Nanosheets with Enhanced Electrochemical Performance in the Ethanol Oxidation Reaction

The ability to manipulate metal electrocatalysts with satisfactory performance for the ethanol oxidation reaction (EOR) is promising but still unsatisfactory for practical application in direct ethanol fuel cells. Beyond traditional metal-metal alloys, we herein report a novel metal-nonmetal alloy electrocatalyst that takes advantage of quaternary PdCuNiP alloy composition and the ultrathin/porous nanosheet (NS) structure. The optimized PdCuNiP porous NSs feature more undercoordinated active sites and modified electron/function structures, enabling better antipoisoning ability. Under alkaline conditions, this electrocatalyst shows excellent electrochemical EOR performance with a high EOR activity of 4.05 A mg_Pd^-1 and a low activation energy of 21.2 kJ mol^-1, comparable to the state-of-the-art electrocatalysts reported in the literature. Meanwhile, PdCuNiP porous NSs are electrocatalytically active for electrochemical oxidation of other fuels (methanol, glycerol, and glucose), highlighting their great potential for various direct alcohol fuel cells. The findings reported here may put forward some insights into designing new functional electrocatalysts for various fuel cell electrocatalysis and beyond.

Mxene coupled over nitrogen-doped graphene anchoring palladium nanocrystals as an advanced electrocatalyst for the ethanol electrooxidation

Development of good support materials is widely adopted as a valid strategy to fabricate high performance electrocatalysts for the ethanol oxidation reaction (EOR). In this study, the small diameter Ti₃C₂T_x MXene thin nanosheets inserted into three-dimensional nitrogen-doped grapheme (NG) was constructed via a facile hydrothermal method and employed as support materials for anchoring Pd nanocrystals (Pd/Ti₃C₂T_x@NG). The obtained-Pd/Ti₃C₂T_x@NG as EOR electrocatalyst in alkaline media outperforms the commercial Pd/C with better electrocatalytic activity, enhanced long-term stability and high CO tolerance. The Ti₃C₂T_x inserted into NG probably plays a key role for enhancing the properties of the synthesized-catalyst. Inserting Ti₃C₂T_x into NG allows the electrocatalysts to have high porosity, surface hydrophilicity, sufficient number of anchor sites for Pd nanocrystals and modifies its electronic properties, which can promote the electrocatalytic activity and durability. The enhanced EOR performance endows Pd/Ti₃C₂T_x@NG with great application potential in fuel cells as an anode catalyst. Furthermore, the prepared Ti₃C₂T_x@NG is also suitable in various desired applications, especially other oxidation reactions.

Pd Nanoparticles Coupled to NiMoO4-C Nanorods for Enhanced Electrocatalytic Ethanol Oxidation

The interfacial interaction including chemical bonding or electron transfer and even physisorption in composite electrocatalysts has a considerable effect on electrocatalytic oxidation reaction. Herein, we report a tremendously enhanced catalytic activity and excellent durability for the ethanol electro-oxidation reaction in NiMoO₄-C-supported Pd composites (Pd/NiMoO₄-C) compared to the commercial Pd/C (10%) catalyst. The X-ray powder diffraction, transmission electron microscopy, and X-ray photoelectron spectroscopy measurements disclose that the strong electron transfer between NiMoO₄ nanorods and Pd nanoparticles likely induces the formation of more electrochemical active centers and improves the adsorption-desorption capacity of reactants and corresponding intermediates. In addition, the Pd/NiMoO₄-C composite exhibits superior specific activity for ethanol oxidation compared to the Pd/NiMoO₄ catalyst with physically incorporated carbon black, which further reveals that the stronger anchoring effect between Pd and C and higher electrical conductivity in Pd/NiMoO₄-C composites are also conducive to promote the ethanol oxidation reaction. These discoveries provide an effective and simple method for the design of advanced electrocatalysts and provide more insights into optimizing the electronic interaction between the catalyst and support in general.

Effect of Sn Doping on Pd Electro-Catalysts for Enhanced Electro-Catalytic Activity towards Methanol and Ethanol Electro-Oxidation in Direct Alcohol Fuel Cells

Carbon nano-onions (CNOs) were successfully synthesized by employing the flame pyrolysis (FP) method, using flaxseed oil as a carbon source. The alcohol reduction method was used to prepare Pd/CNOs and Pd-Sn/CNOs electro-catalysts, with ethylene glycol as the solvent and reduction agent. The metal-nanoparticles were supported on the CNO surface without adjusting the pH of the solution. High-resolution transmission electron microscopy (HRTEM) images reveal CNOs with concentric graphite ring morphology, and also PdSn nanoparticles supported on the CNOs. X-ray diffractometry (XRD) patterns confirm that CNOs are amorphous and show the characteristic diffraction peaks of Pd. There is a shifting of Pd diffraction peaks to lower angles upon the addition of Sn compared to Pd/CNOs. X-ray photoelectron spectroscopy (XPS) results also confirm the doping of Pd with Sn to form a PdSn alloy. Fourier transform infrared spectroscopy (FTIR) displays oxygen, hydroxyl, carboxyl, and carbonyl, which facilitates the dispersion of Pd and Sn nanoparticles. Raman spectrum displays two prominent peaks of carbonaceous materials which correspond to the D and G bands. The Pd-Sn/CNOs electro-catalyst demonstrates improved electro-oxidation of methanol and ethanol performance compared to Pd/CNOs and commercial Pd/C electro-catalysts under alkaline conditions.

Recent advances in phosphorus containing noble metal electrocatalysts for direct liquid fuel cells

Direct liquid fuel cells (DLFCs) are considered as satisfactory alternatives to traditional fossil fuels owing to their unique advantages, e.g. environmental friendliness and easy storage. Noble metal catalysts are widely used to improve the efficiency of DLFCs. However, the high cost, low utilization and poor stability of noble metals restricted their practical applications. Therefore, it is of great significance to explore cost-effective electrocatalysts and further improve their electrocatalytic performance. Reducing the content of noble metals by adding low-priced phosphorus (P) has been considered as an effective strategy, which is able to enhance their electrocatalytic activity and anti-poisoning ability through effectively changing the electronic density of active sites. In the past few years, tremendous P containing catalysts have been synthesized and utilized in DLFCs. In this review, we summarize the fundamentals of electrochemical reactions and present recent progress in P containing noble metal catalysts for DLFCs, including the discussion of their shape, composition and the relationship between P and active sites. Finally, the challenges and some potential directions in this field are pointed out.

A copper nitride catalyst for the efficient hydroxylation of aryl halides under ligand-free conditions

Copper nitride (Cu3N) was used as a heterogeneous catalyst for the hydroxylation of aryl halides under ligand-free conditions. The cubic Cu3N nanoparticles showed high catalytic activity, comparable to those of conventional Cu catalysts with nitrogen ligands, demonstrating that the nitrogen atoms in Cu3N act as functional ligands that promote hydroxylation.

Ordered PdCu-Based Core-Shell Concave Nanocubes Enclosed by High-Index Facets for Ethanol Electrooxidation

Crystal phase engineering is a powerful strategy for regulating the performance of electrocatalysts toward many electrocatalytic reactions. Herein we demonstrate that Au@Pd₁Cu concave nanocubes (CNCs) with an ordered body-centered cubic (bcc) PdCu alloy shell enclosed by many high active high-index facets can be adopted as highly active yet stable electrocatalysts for the ethanol oxidation reaction (EOR). These CNCs are more efficient than other nanocrystals with a disordered face-centered cubic (fcc) PdCu alloy surface and display high mass and specific activities of 10.59 A mg_pd^-1 and 33.24 mA cm^-2, which are 11.7 times and 4.1 times higher than those of commercial Pd black, respectively. Our core-shell CNCs also exhibit robust durability with the weakest decay in activity after 250 potential-scanning cycles, as well as outstanding antipoisoning ability. Alloying with Cu and the ordered bcc phase surface can provide abundant OH_ads species to oxidize carbonaceous poison to avoid catalyst poisoning, and the exposed high-index facets on the surface can act as highly catalytic sites.

Highly efficient blackberry-like trimetallic PdAuCu nanoparticles with optimized Pd content for ethanol electrooxidation

The rational design of highly efficient catalysts for ethanol electrooxidation is extremely challenging for developing direct ethanol fuel cells (DEFCs). Herein, a facile one-pot method has been developed to prepare blackberry-like PdAuCu nanoparticles (NPs) with tunable composition and surface structures. Among PdAuCu NPs with different Pd contents (1.6-22 mass%), PdAuCu NPs-0.5 (contained Pd at 2.5 mass%) delivered one of the highest catalytic activities of Pd-based catalysts towards ethanol electrooxidation, exhibiting a mass activity of 23.0 A mg_Pd^-1. Kinetic analysis, electrochemical impedance spectroscopy and CO stripping test results suggested that the excellent electrocatalytic activity may originate from the optimized balance between Pd content and surface structure of PdAuCu NPs-0.5. The optimization of the balance between composition and surface structure would contribute to the further design of multimetallic nanoparticles for fuel cells and other applications.

Controlled growth of ultrafine metal nanoparticles mediated by solid supports

As a unique class of nanomaterials with a high surface-area-to-volume ratio and narrow size distribution, ultrafine metal nanoparticles (UMNPs) have shown exciting properties in many applications, particularly in the field of catalysis. Growing UMNPs in situ on solid supports enables precise control of the UMNP size, and the supports can effectively prevent the aggregation of UMNPs and maintain their high catalytic activity. In this review, we summarize the recent research progress in controlled growth of UMNPs using various solid supports and their applications in catalysis.

CoPd Nanoalloys with Metal-Organic Framework as Template for Both N-Doped Carbon and Cobalt Precursor: Efficient and Robust Catalysts for Hydrogenation Reactions

In this work, a series of metal-organic framework (MOF)-derived CoPd nanoalloys have been prepared. The nanocatalysts exhibited excellent activities in the hydrogenation of nitroarenes and alkenes in green solvent (ethanol/water) under mild conditions (H₂ balloon, room temperature). Using ZIF-67 as template for both carbon matrix and cobalt precursor coating with a mesoporous SiO₂ layer, the catalyst CoPd/NC@SiO₂ was smoothly constructed. Catalytic results revealed a synergistic effect between Co and Pd components in the hydrogenation process due to the enhanced electron density. The mesoporous SiO₂ shell effectively prevented the sintering of hollow carbon and metal NPs at high temperature, furnishing the well-dispersed nanoalloy catalysts and better catalytic performance. Moreover, the catalyst was durable and showed negligible activity decay in recycling and scale-up experiments, providing a mild and highly efficient way to access amines and arenes.

Unveiling Synergistic Effects of Interstitial Boron in Palladium-Based Nanocatalysts for Ethanol Oxidation Electrocatalysis

Alloying is one of the most promising routes for tuning the physicochemical properties of noble metal-based nanocatalysts and thus improving their (electro)catalytic performance. Despites numerous achievements, bimetallic and trimetallic nanoalloys have still been thoroughly studied for the past two decades. In this study, metalloid boron (B) was alloyed within palladium (Pd)-based nanocatalysts to promote the electrochemical ethanol oxidation reaction (EOR) in alkaline media. The optimum PdCuB nanocatalyst exhibited remarkable electrochemical EOR activity (5.83 A mg_Pd^-1) and good operation stability (both cycling and chronoamperometric studies). Mechanistic studies in both pure KOH and a KOH/ethanol mixture attributed superior EOR performance to positive synergistic effects of B in Pd-based nanocatalysts that kinetically accelerated the removal of poisoning ethoxy intermediates (the rate-determining step of EOR). They included (i) an electronic effect that changed the electronic structure of Pd and thus weakened the adsorption of poisoning ethoxy intermediates, (ii) a bifunctional effect that facilitated the adsorption of OH_ads and thus kinetically accelerated the further oxidation of poisoning intermediates, and (iii) a structural effect in which smaller B interstitially inserted into Pd-based nanocrystals and thus suppressed the physical Ostwald ripening processes.

Ternary Palladium-Boron-Phosphorus Alloy Mesoporous Nanospheres for Highly Efficient Electrocatalysis

Alloying palladium (Pd) catalysts with various metalloid and nonmetal elements can improve their catalytic performance in different chemical reactions. However, current nanosynthesis methods can only generate Pd alloys containing one metalloid or nonmetal, which limits the types of element combinations that may be used to improve Pd-based nanocatalysts. Herein, we report a simple soft-templating synthetic strategy to co-alloy Pd with the metalloid boron (B) and the nonmetal phosphorus (P) to generate ternary PdBP mesoporous nanospheres (MSs) with three-dimensional dendritic frameworks. We use a one-step aqueous synthesis method where dimethylamine borane and sodium hypophosphite serve as the B and P sources, respectively, as well as the co-reducing agents to drive the nucleation and growth of ternary PdBP alloy on a sacrificial dioctadecyldimethylammonium chloride template. The concentration of metalloid to nonmetal and the diameters of dendritic MSs can be tailored. The synthetic protocol is also extended to other multicomponent PdMBP alloy MSs to generate different types of dendritic mesoporous frameworks. Boron and phosphorus are known to accelerate the kinetics of the electrochemical oxygen reduction reaction (ORR) and alcohol oxidation reactions (AORs), because their alloys promote the decomposition of oxygen-containing intermediates on Pd surfaces. The dendritic mesoporous morphology of the ternary PdBP MSs also accelerates electron/mass transfer and exposes numerous active sites, enabling better performance in the ORR and AORs. Extending the surfactant-templating synthetic route to multiple types of elements will enable the generation of libraries of multicomponent metal-metalloid-nonmetal alloy nanostructures with functions that are suitable for various targeted applications.

Co-Ag alloy protected by nitrogen doped carbon as highly efficient and chemoselective catalysts for the hydrogenation of halogenated nitrobenzenes

The design of lower-cost alternative heterogeneous catalysts for the hydrogenation of halogenated nitrobenzenes using green method to synthesize the corresponding anilines is highly desirable. In this study, Ag was incorporated into the Co-MOFs during the growing process (Co-Ag(n)-MOFs), and then followed the carbothermal reduction process without any additional procedures, we synthesized a series of Co-Ag(n)@NCs. The self-supported catalysts exhibited excellent and stable catalytic performances for the chemoselective hydrogenation of halogenated nitrobenzenes without obvious dehalogenation. The Co-Ag bimetallic alloy nanoparticles were well-dispersed and protected from aggregation and leaching by the porous nitrogen doped carbon. Besides, either hydrazine hydrate (N₂H₄·H₂O, generating byproducts N₂ and H₂O) or H₂ could be used as green reducing agent with excellent selectivity towards synthesizing the corresponding anilines. And when the Co/Ag content ratio was approximate 1:1, the Co-Ag(1:1)@NC showed the best catalytic performance. Moreover, the Co-Ag(1:1)@NC could be efficiently recovered by using an external magnetic force and reused without obvious decrease of catalytic activity. Thus, such highly efficient, inexpensive, stable and magnetically recyclable catalysts could show great potentials in practical applications for many important reactions.

The green synthesis of ultrafine palladium–phosphorus alloyed nanoparticles anchored on polydopamine functionalized graphene used as an excellent electrocatalyst for ethanol oxidation

A new catalyst, consisting of ultrafine Pd–P alloyed nanoparticles (NPs) anchored on polydopamine functionalized graphene (Pd–P/PDA-GS), was fabricated by a green, facile and surfactant free method for ethanol electrocatalytic oxidation reaction (EOR).