A metallopeptoid as an efficient bioinspired cooperative catalyst for the aerobic oxidative synthesis of imines

An intramolecular cobalt-peptoid complex as an efficient electrocatalyst for water oxidation at low overpotential

Water electrolysis is the simplest way to produce hydrogen, as a clean renewable fuel. However, the high overpotential and slow kinetics hamper its applicability. Designing efficient and stable electrocatalysts for water oxidation (WO), which is the first and limiting step of the water splitting process, can overcome this limitation. However, the development of such catalysts based on non-precious metal ions is still challenging. Herein we describe a bio-inspired Co(iii)-based complex i.e., a stable and efficient molecular electrocatalyst for WO, constructed from a peptidomimetic oligomer called peptoid - N-substituted glycine oligomer - bearing two binding ligands, terpyridine and bipyridine, and one ethanolic group as a proton shuttler. Upon binding of a cobalt ion, this peptoid forms an intramolecular Co(iii) complex, that acts as an efficient electrocatalyst for homogeneous WO in aqueous phosphate buffer at pH 7 with a high faradaic efficiency of up to 92% at an overpotential of about 430 mV, which is the lowest reported for Co-based homogeneous WO electrocatalysts to date. We demonstrated the high stability of the complex during electrocatalytic WO and that the ethanolic side chain plays a key role in the stability and activity of the complex and also in facilitating water binding, thus mimicking an enzymatic second coordination sphere.

Application of artificial backbone connectivity in the development of metalloenzyme mimics

Metal-dependent enzymes are abundant and vital catalytic agents in nature. The functional versatility of metalloenzymes has made them common targets for improvement by protein engineering as well as mimicry by de novo designed sequences. In both strategies, the incorporation of non-canonical cofactors and/or non-canonical side chains has proved a useful tool. Less explored-but similarly powerful-is the utilization of non-canonical covalent modifications to the polypeptide backbone itself. Such efforts can entail either introduction of limited artificial monomers in natural chains to produce heterogeneous backbones or construction of completely abiotic oligomers that adopt defined folds. Herein, we review recent research applying artificial protein-like backbones in the construction of metalloenzyme mimics, highlighting progress as well as open questions in this emerging field.

Amide bond hydrolysis of peptoids

Incorporating a chiral non-coordinating substitution at the N-terminal end within peptoids facilitates regio-selective amide bond hydrolysis mediated by a transition metal ion and/or an acidic buffer as evident by X-ray crystallographic analysis, supported by ESI-MS. This opens up a new direction for peptidomimetic compounds towards future application in chemistry, biology and medicine.

A Di-Copper-Peptoid in a Noninnocent Borate Buffer as a Fast Electrocatalyst for Homogeneous Water Oxidation with Low Overpotential

Water electrolysis is a promising approach toward low-cost renewable fuels; however, the high overpotential and slow kinetics limit its applicability. Studies suggest that either dinuclear copper (Cu) centers or the use of borate buffer can lead to efficient catalysis. We previously demonstrated the ability of peptoids-N-substituted glycine oligomers-to stabilize high-oxidation-state metal ions and to form self-assembled di-copper-peptoid complexes. Capitalizing on these features herein we report on a unique Cu-peptoid duplex, Cu₂(BEE)₂, that is a fast and stable homogeneous electrocatalyst for water oxidation in borate buffer at pH 9.35, with low overpotential and a high turnover frequency of 129 s^-1 (peak current measurements) or 5503 s^-1 (FOWA); both are the highest reported for Cu-based water electrocatalysts to date. BEE is a peptoid trimer having one 2,2'-bipyridine ligand and two ethanolic groups, easily synthesized on solid support. Cu₂(BEE)₂ was characterized by single-crystal X-ray diffraction and various spectroscopic and electrochemical techniques, demonstrating its ability to maintain stable in four cycles of controlled potential electrolysis, leading to a high overall turnover number of 51.4 in a total of 2 h. Interestingly, the catalytic activity of control complexes having only one ethanolic side chain is 2 orders of magnitude lower than that of Cu₂(BEE)₂. On the basis of this comparison and on mechanistic studies, we propose that the ethanolic side chains and the borate buffer have significant roles in the high stability and catalytic activity of Cu₂(BEE)₂; the -OH groups facilitate protons transfer, while the borate species enables oxygen transfer toward O-O bond formation.

Sequence-function relationship within water-soluble Peptoid Chelators for Cu2

Chelation of Cu²⁺ by synthetic molecules is an emerging therapeutic approach for treating several illnesses in human body such as Wilson disease, cancer and more. Among synthetic metal chelators, those based on peptoids - N-substituted glycine oligomers - are advantageous due to their structural similarity to peptides, ease of synthesis on solid support and versatile controlled sequences. Tuning peptoid sequences, via systematically changing at least one side chain, can facilitate and control their function. Along these lines, this work aims to explore the role of the non-coordinating side chain within peptoid chelators in order to understand the factors that control the selectivity of these chelators to Cu²⁺ in water medium. To this aim, a set of peptoid trimers having a pyridine group at the acetylated N-terminal, a 2,2'-bipyridine group at the second position and a non-coordinating group at the C-terminus, where the latter is systematically varied between aromatic, aliphatic, chiral or non-chiral, were investigated as selective chelators for Cu²⁺. The effect of the position of the non-coordinating group on the selectivity of the peptoid to Cu²⁺ was also tested. Based on extensive spectroscopic data, we found that the choice of the non-coordinating group along with its position dramatically influences the selectivity of the peptoids to Cu²⁺. We showed that peptoids having bulky chiral groups at the C-terminus enable high selectivity to Cu²⁺. We further demonstrated the ability of one of the selective chelators to remove Cu²⁺ from the natural copper binding protein metallothionein in HEPES (4-(2-hydroxyethyl)-1-piperazineethanesulfonic acid) buffer medium.

A unique Co(iii)-peptoid as a fast electrocatalyst for homogeneous water oxidation with low overpotential

A peptoid trimer incorporating terpyridine and ethanol forms an intermolecular cobalt(iii) complex, which performs as a soluble electrocatalyst for water oxidation with a minimal overpotential of 350 mV and a high turnover frequency of 108 s⁻¹.

Metal-Binding Foldamers

Sequence-defined oligomeric molecules with discrete folding propensities, termed foldamers, are a versatile source of agents with tailored structure and function. An inspiration for the development of the foldamer paradigm are natural biomacromolecules, the sequence-encoded folding of which is the basis of life. Metal ions and clusters are common features in proteins, where the role of metal varies from supporting structure to enabling function. The ubiquity of metals in natural systems suggests promise for metals in the context of folded artificial backbones. In this Minireview, we highlight efforts to realize this potential through a survey of published work on the design, synthesis, and characterization of metal-binding foldamers.

A rationally designed peptoid for the selective chelation of Zn2+ over Cu2

The selective removal of Zn²⁺ from proteins by using a synthetic chelator is a promising therapeutic approach for the treatment of various diseases including cancer. Although the chelation of Zn²⁺ is well known, its removal from a protein in the presence of potential competing biologically relevant ions such as Cu²⁺ is hardly explored. Herein we present a peptoid - N-substituted glycine trimer - incorporating a picolyl group at the N-terminus, a non-coordinating but structurally directing benzyl group at the C-terminus and a 2,2':6',2''-terpyridine group in the second position, that selectively binds Zn²⁺ ions in the presence of excess Cu²⁺ ions in water. We further demonstrate that this chelator can selectively bind Zn²⁺ from a pool of excess biologically relevant and competitive ions (Cu²⁺, Fe³⁺, Ca²⁺, Mg²⁺, Na⁺, and K⁺) in a simulated body fluid (SBF), and also its ability to remove Zn²⁺ from a natural zinc protein domain (PYKCPECGKSFSQKSDLVKHQRTHTG) in a SBF.

Peptide science: A "rule model" for new generations of peptidomimetics

Peptides have been heavily investigated for their biocompatible and bioactive properties. Though a wide array of functionalities can be introduced by varying the amino acid sequence or by structural constraints, properties such as proteolytic stability, catalytic activity, and phase behavior in solution are difficult or impossible to impart upon naturally occurring α-L-peptides. To this end, sequence-controlled peptidomimetics exhibit new folds, morphologies, and chemical modifications that create new structures and functions. The study of these new classes of polymers, especially α-peptoids, has been highly influenced by the analysis, computational, and design techniques developed for peptides. This review examines techniques to determine primary, secondary, and tertiary structure of peptides, and how they have been adapted to investigate peptoid structure. Computational models developed for peptides have been modified to predict the morphologies of peptoids and have increased in accuracy in recent years. The combination of in vitro and in silico techniques have led to secondary and tertiary structure design principles that mirror those for peptides. We then examine several important developments in peptoid applications inspired by peptides such as pharmaceuticals, catalysis, and protein-binding. A brief survey of alternative backbone structures and research investigating these peptidomimetics shows how the advancement of peptide and peptoid science has influenced the growth of numerous fields of study. As peptide, peptoid, and other peptidomimetic studies continue to advance, we will expect to see higher throughput structural analyses, greater computational accuracy and functionality, and wider application space that can improve human health, solve environmental challenges, and meet industrial needs. STATEMENT OF SIGNIFICANCE: Many historical, chemical, and functional relations draw a thread connecting peptides to their recent cognates, the "peptidomimetics". This review presents a comprehensive survey of this field by highlighting the width and relevance of these familial connections. In the first section, we examine the experimental and computational techniques originally developed for peptides and their morphing into a broader analytical and predictive toolbox. The second section presents an excursus of the structures and properties of prominent peptidomimetics, and how the expansion of the chemical and structural diversity has returned new exciting properties. The third section presents an overview of technological applications and new families of peptidomimetics. As the field grows, new compounds emerge with clear potential in medicine and advanced manufacturing.

Peptoids as tools and sensors

A review of molecular tools and sensors assembled on N-substituted glycine, or α-peptoid, oligomers between 2013 and November 2018 with the following sections: (a) Peptoids as crystal growth modifiers, (b) Peptoids as catalysts, (c) Ion and molecule sequestration and transport, (d) Peptoid sensors, (e) Macromolecule recognition, (f) Cellular transporters, (g) Medical imaging, (h) Future direction and (i) Summary and outlook. Peptoids are a promising class of peptide mimic making them an excellent platform for functional molecule preparation. Attributes of peptoid oligomers include: (a) the ease of precise sequence definition and mono-dispersity; (b) access to a vast chemical space within simple and repeating chemical preparative steps and (c) thermal, chemical and biological stability all lending support for their application in a number of areas, with some that have been realised to date. The peptoid tool and sensor examples selected have realised practical utility. They serve to illustrate the rapidity of new insight that can generate in many disparate areas of science and technology, enabling the quick assembly of design criteria for efficient peptoid molecular tools and sensors.

Folding of unstructured peptoids and formation of hetero-bimetallic peptoid complexes upon side-chain-to-metal coordination

Helices are key structural features in biopolymers, enabling a variety of biological functions. Mimicking these secondary structure motifs has wide potential in the development of biomimetic materials. Peptoids, N-substituted glycine oligomers, are an important class of peptide mimics that can adopt polyproline type helices if the majority of their sequence consists of chiral bulky pendent groups. Such side-chains are structure inducers but they have no functional value. We present here the inclusion of several metal-binding groups in one peptoid oligomer as a new platform towards the development of functional helical peptoids. Thus, we describe the coordination of two metal ions to unstructured peptoids incorporating four 8-hydroxyquinoline (HQ) ligands at fixed positions as two (HQ, HQ) metal binding sites, and a mixture of chiral benzyl and alkyl substituents in varied positions along the peptoid backbone. For the first time, we demonstrate by circular dichroism spectroscopy, solution NMR techniques and high-level DFT calculations that some of these unstructured peptoids can fold upon metal binding to form helical structures. Replacing one HQ ligand with a terpyridine (Terpy) ligand resulted in unique sequences that can selectively coordinate Cu2+ to the (Terpy, HQ) and Zn2+ (or Co2+) to the (HQ, HQ) sites from a solution mixture containing Cu2+ and Zn2+ (or Co2+) ions. Interestingly, the binding of Cu2+ to the (Terpy, HQ) site in one of these peptoids can initiate a conformational change that in turn facilitates the coordination of Zn2+ (or Co2+) ions to the (HQ, HQ) site, demonstrating a unique example of positive allosteric cooperativity in peptide mimics.

Metalloporphyrin Dimers Bridged by a Peptoid Helix: Host-Guest Interaction and Chiral Recognition

Co-facial porphyrins have been designed to construct porphyrin tweezers with versatile molecular recognition capabilities. In this study, we synthesized metalloporphyrin–peptoid conjugates (MPPCs) displaying two metalloporphyrins on a peptoid scaffold with either achiral unfolded (1) or helical (2 and 3) secondary structures. Host–guest complexation of MPPCs was realized with various guests of different lengths and basicities, and the extent of complexation was measured by UV-vis and circular dichroism (CD) spectroscopic titration. Intermolecular and intramolecular chirality induction were observed on achiral and chiral peptoid backbones, respectively. Spectroscopic data indicated that a broad scope of achiral guests can be recognized by chiral 2; in particular, longer and more flexible guests were seen to bind more tightly on 2. In addition, chiral 2 provided a distinct CD couplet with dl-, d-, or l-Lys-OMe, which was a result of the diastereomeric host–guest complex formation. Our results indicated that MPPCs can recognize, contrast, and analyze various achiral, chiral, or racemic molecules. Based on co-facial metalloporphyrins present on peptoid scaffolds, we developed a novel class of porphyrin tweezers, which can be further utilized in asymmetric catalysis, molecular sensing, and drug delivery.

Water soluble hydrophobic peptoids via a minor backbone modification

The incorporation of piperazine or homopiperazine within hydrophobic peptoid scaffolds leads to their water solubility while increasing their overall conformational order in water.