Polydopamine supported palladium nanoparticles: Highly efficient catalysts in Suzuki cross-coupling and tandem Suzuki cross-coupling/nitroarene reductions under green reaction conditions

The Substituent Effects of Suzuki Coupling in Aqueous Micelles

The Suzuki coupling in aqueous micelles has received much attention, but few attempts focus on its substituent effects. In view of the significant substituent effects on this reaction, it is necessary and practical to investigate its substituent effects. Herein, the substituent effects of Suzuki coupling in aqueous micelles are well established through Hammett plots and kinetic studies. In the cases of aryl halides, the rate-determining step of the reaction will shift from the oxidation addition step to the transmetalation step as the substituents' electron withdrawing ability increases, so aryl halides with weak electron-withdrawing groups exhibit better reactivity than ones containing strong electron-withdrawing or electron-donating groups. For arylboronic acids, the electron donating groups are beneficial to the Suzuki reaction, while the electron withdrawing group is unfavorable for the reaction. The Suzuki reactions of substituent exchange between arylboronic acids and aryl halides further confirm these substituent effects.

Highly Functionalized SWCNTs with a Dopamine Derivative as a Support for Pd Nanoparticles: A Recyclable Catalyst for the Reduction of Nitro Compounds and the Heck Reaction

Single-walled carbon nanotubes (SWCNTs) were functionalized with a dopamine derivative in which the amine group was converted to azide (dopamine azide). The direct reaction of SWCNTs and dopamine azide in o-dichlorobenzene at high temperature (160 °C) led to very highly functionalized CNTs (≈60 wt.%). Surprisingly, despite this high degree of functionalization, Raman spectroscopy detected a low disruption of the π-network of the carbonaceous support. This finding was justified by the rehybridization from sp3 to sp2 of the sidewall carbon atoms of CNTs involved in the functionalization process. Further characterization by means of different techniques such as X-ray photoelectron spectroscopy (XPS) analysis and transmission electron microscopy (TEM) allowed to shed some light on the chemical composition and morphology of the obtained material. Moreover, the estimation of the total content of phenolic units and their reducing potential after CNTs functionalization was also assessed using Folin and Ciocalteu and 2,2-diphenyl-1-picryl hydrazide (DPPH) assays. The functionalization of CNTs was exploited to immobilize palladium(II) species that were subsequently reduced with NaBH4 leading to the formation of Pd nanoparticles (NPs). The so obtained hybrid material was used as a recyclable heterogeneous catalyst for the reduction of nitro compounds and the Heck reaction.

Pd single-atom-site stabilized by supported phosphomolybdic acid: design, characterizations and tandem Suzuki-Miyaura cross coupling/nitro hydrogenation reaction

Herein, a single-metal (Pd) site with high surface energy was stabilized and dispersed on a support (zirconia) via a stabilizing agent (phosphomolybdic acid) using a wet chemistry method. HRTEM and HAADF-STEM showed a highly uniform dispersion of Pd SASc on PMA/ZrO2. The Pd SASc showed superior catalytic activity (>99% conversion) for the Suzuki-Miyaura cross-coupling reaction, which was further feasible for catalyzing mechanistically different nitro hydrogenation reactions in tandem fusion under mild reaction conditions. This catalyst showed outstanding activity (100% conversion and 99% selectivity) with a substrate/catalyst ratio of 927 and TON of 918 using a very low amount of Pd (0.94 × 10-3 mmol) for the tandem Suzuki-Miyaura cross-coupling/nitro hydrogenation reaction. It also exhibited superior stability and reusability for up to three cycles without any change in its activity.

Pd-Pd/PdO as active sites on intercalated graphene oxide modified by diaminobenzene: fabrication, catalysis properties, synergistic effects, and catalytic mechanism

Pd-Pd/PdO nanoclusters well dispersed on intercalated graphene oxide (GO) (denoted as GO@PPD-Pd) were prepared and characterized. GO@PPD-Pd exhibited high catalytic activity (a TOF value of 60 705 h-1) during the Suzuki coupling reaction, and it could be reused at least 6 times. The real active centre was Pd(200)-Pd(200)/PdO(110, 102). A change in the Pd facets on the surface of PdO was a key factor leading to deactivation, and the aggregation and loss of active centres was also another important reason. The catalytic mechanism involved heterogeneous catalysis, showing that the catalytic processes occurred at the interface, including substrate adsorption, intermediate formation, and product desorption. The real active centres showed enhanced negative charge due to the transfer of electrons from the carrier and ligands, which could effectively promote the oxidative addition reaction, and Pd(200) and the heteroconjugated Pd/PdO interface generated in situ also participated in the coupling process, synergistically boosting activity. Developed GO@PPD-Pd was a viable heterogeneous catalyst that may have practical applications owing to its easy synthesis and stability, and this synergistic approach can be utilized to develop other transition-metal catalysts.

Recent Progress of Metal Nanoparticle Catalysts for C–C Bond Forming Reactions

Over the past few decades, the use of transition metal nanoparticles (NPs) in catalysis has attracted much attention and their use in C–C bond forming reactions constitutes one of their most important applications. A huge variety of metal NPs, which have showed high catalytic activity for C–C bond forming reactions, have been developed up to now. Many kinds of stabilizers, such as inorganic materials, magnetically recoverable materials, porous materials, organic–inorganic composites, carbon materials, polymers, and surfactants have been utilized to develop metal NPs catalysts. This review classified and outlined the categories of metal NPs by the type of support.

Palladium and Copper: Advantageous Nanocatalysts for Multi-Step Transformations

Metal nanoparticles have been deeply studied in the last few decades due to their attractive physical and chemical properties, finding a wide range of applications in several fields. Among them, well-defined nano-structures can combine the main advantages of heterogeneous and homogeneous catalysts. Especially, catalyzed multi-step processes for the production of added-value chemicals represent straightforward synthetic methodologies, including tandem and sequential reactions that avoid the purification of intermediate compounds. In particular, palladium- and copper-based nanocatalysts are often applied, becoming a current strategy in the sustainable synthesis of fine chemicals. The rational tailoring of nanosized materials involving both those immobilized on solid supports and liquid phases and their applications in organic synthesis are herein reviewed.

Anchored Pd(0) Nanoparticles on Synthetic Talc for the Synthesis of Biaryls and a Precursor of Angiotensin II Inhibitors

The palladium-catalyzed Suzuki–Miyaura cross-coupling reaction is one of the most important and efficient reactions to prepare a variety of organic compounds, including biaryls. Despite the overwhelming number of reports related to this topic, some methodological difficulties persist in terms of catalyst handling, recovery, and reuse, as well as the reaction media. This work reports the rational design of new, efficient, cost-effective, and reusable palladium catalysts supported on synthetic talc for the Suzuki–Miyaura reaction. From the results, key points were identified: both designed catalysts accelerated the reaction in EtOH and an open-flask setup, affording moderate to excellent yields within a short time (e.g., 30 min) even for deactivated aryl halides; the protocol can be applied to a great number of both cross-coupling partners, showing an excellent functional group tolerance; the catalysts can be recovered and reused without significant loss of activity. This protocol was used for the synthesis of a precursor of angiotensin II inhibitors such as valsartan, losartan, irbesartan, and telmisartan.

Suzuki–Miyaura cross coupling reaction: recent advancements in catalysis and organic synthesis

Suzuki–Miyaura cross coupling reaction (SMCR) – A milestone in the synthesis of C–C coupled compounds.

Polydopamine-based nanoreactors: synthesis and applications in bioscience and energy materials

Polydopamine (PDA)-based nanoreactors have shown exceptional promise as multifunctional materials due to their nanoscale dimensions and sub-microliter volumes for reactions of different systems. Biocompatibility, abundance of active sites, and excellent photothermal conversion have facilitated their extensive use in bioscience and energy storage/conversion. This minireview summarizes recent advances in PDA-based nanoreactors, as applied to the abovementioned fields. We first highlight the design and synthesis of functional PDA-based nanoreactors with structural and compositional diversity. Special emphasis in bioscience has been given to drug/protein delivery, photothermal therapy, and antibacterial properties, while for energy-related applications, the focus is on electrochemical energy storage, catalysis, and solar energy harvesting. In addition, perspectives on pressing challenges and future research opportunities regarding PDA-based nanoreactors are discussed.

Metal-Containing Polydopamine Nanomaterials: Catalysis, Energy, and Theranostics

Polydopamine (PDA) is a major type of artificial melanin material with many interesting properties such as antioxidant activity, free-radical scavenging, high photothermal conversion efficiency, and strong metal-ion chelation. The high affinity of PDA to a wide range of metals/metal ions has offered a new class of functional metal-containing polydopamine (MPDA) nanomaterials with promising functions and extensive applications. Understanding and controlling the metal coordination environment is vital to achieve desirable functions for which such materials can be exploited. MPDA nanomaterials with metal/metal ions as the active functions are reviewed, including their synthesis and metal coordination environment and their applications in catalysis, batteries, solar cells, capacitors, medical imaging, cancer therapy, antifouling, and antibacterial coating. The current trends, limitations, and future directions of this area are also explored.

Polyvinylpyridine-Supported Palladium Nanoparticles: An Efficient Catalyst for Suzuki–Miyaura Coupling Reactions

Palladium nanoparticles (Pd NPs) synthesized by the metal vapor synthesis technique were supported on poly(4-vinylpyridine) 2% cross-linked with divinylbenzene (Pd/PVPy). Transmission electron microscopy revealed the presence of small metal nanoparticles (dm = 2.9 nm) highly dispersed on the PVPy. The Pd/PVPy system showed high catalytic efficiency in Suzuki-Miyaura carbon–carbon coupling reactions of both non-activated and deactivated aromatic iodides and bromides with aryl boronic acids, carried out under an air atmosphere. The high turnover of the catalyst and the ability of the PVPy resin to retain active Pd species are highlighted. By comparing the catalytic performances of Pd/PVPy with those observed by using commercially available Pd-based supported catalysts, the reported system showed higher selectivity and lower Pd leaching.

Preparation of a PdRuNi/C tri-metallic nanocatalyst and its excellent catalytic performance for ethylbenzene hydrogenation reaction

PdRuNi/C with the nanostructure of PdRu-on-Ni/Ni(OH)₂ NPs exhibited excellent catalytic performance for ethylbenzene hydrogenation due to the nano-synergistic effect.