Heterogeneous Rh/CPOL-BP&P(OPh)3 catalysts for hydroformylation of 1-butene: The formation and evolution of the active species

Highly dispersed Rh single atoms over graphitic carbon nitride as a robust catalyst for the hydroformylation reaction

Rhodium-catalysed hydroformylation, effective tool in bulk and fine-chemical synthesis, predominantly uses soluble metal complexes. For that reason, the metal leaching and the catalyst recycling are still the major drawbacks of this process. Single-atom catalysts have emerged as a powerful tool to combine the advantages of both homogeneous and heterogeneous catalysts. Since using an appropriate support material is key to create stable, finely dispersed, single-atom catalysts, here we show that Rh atoms anchored on graphitic carbon nitride are robust catalysts for the hydroformylation reaction of styrene.

Ethene Hydroformylation Catalyzed by Rhodium Dispersed with Zinc or Cobalt in Silanol Nests of Dealuminated Zeolite Beta

Catalysts for hydroformylation of ethene were prepared by grafting Rh into nests of ≡SiOZn-OH or ≡SiOCo-OH species prepared in dealuminated BEA zeolite. X-ray absorption spectra and infrared spectra of adsorbed CO were used to characterize the dispersion of Rh. The Rh dispersion was found to increase markedly with increasing M/Rh (M = Zn or Co) ratio; further increases in Rh dispersion occurred upon use for ethene hydroformylation catalysis. The turnover frequency for ethene hydroformylation measured for a fixed set of reaction conditions increased with the fraction of atomically dispersed Rh. The ethene hydroformylation activity is 15.5-fold higher for M = Co than for M = Zn, whereas the propanal selectivity is slightly greater for the latter catalyst. The activity of the Co-containing catalyst exceeds that of all previously reported Rh-containing bimetallic catalysts. The rates of ethene hydroformylation and ethene hydrogenation exhibit positive reaction orders in ethene and hydrogen but negative orders in carbon monoxide. In situ IR spectroscopy and the kinetics of the catalytic reactions suggest that ethene hydroformylation is mainly catalyzed by atomically dispersed Rh that is influenced by Rh-M interactions, whereas ethene hydrogenation is mainly catalyzed by Rh nanoclusters. In situ IR spectroscopy also indicates that the ethene hydroformylation is rate limited by formation of propionyl groups and by their hydrogenation, a conclusion supported by the measured H/D kinetic isotope effect. This study presents a novel method for creating highly active Rh-containing bimetallic sites for ethene hydroformylation and provides new insights into the mechanism and kinetics of this process.

Surface and Interface Coordination Chemistry Learned from Model Heterogeneous Metal Nanocatalysts: From Atomically Dispersed Catalysts to Atomically Precise Clusters

The surface and interface coordination structures of heterogeneous metal catalysts are crucial to their catalytic performance. However, the complicated surface and interface structures of heterogeneous catalysts make it challenging to identify the molecular-level structure of their active sites and thus precisely control their performance. To address this challenge, atomically dispersed metal catalysts (ADMCs) and ligand-protected atomically precise metal clusters (APMCs) have been emerging as two important classes of model heterogeneous catalysts in recent years, helping to build bridge between homogeneous and heterogeneous catalysis. This review illustrates how the surface and interface coordination chemistry of these two types of model catalysts determines the catalytic performance from multiple dimensions. The section of ADMCs starts with the local coordination structure of metal sites at the metal-support interface, and then focuses on the effects of coordinating atoms, including their basicity and hardness/softness. Studies are also summarized to discuss the cooperativity achieved by dual metal sites and remote effects. In the section of APMCs, the roles of surface ligands and supports in determining the catalytic activity, selectivity, and stability of APMCs are illustrated. Finally, some personal perspectives on the further development of surface coordination and interface chemistry for model heterogeneous metal catalysts are presented.

A biphosphine copolymer encapsulated single-site Rh catalyst for heterogeneous regioselective hydroaminomethylation of alkenes

A novel porous organic polymer catalyst with in situ encapsulated single-site Rh (Rh@CPOL-DPMphos&p-3vPPh₃) was developed and employed in heterogeneous hydroaminomethylation of alkenes, affording the corresponding amines in good to excellent regioselectivity and catalytic activity by a one-pot method. The combined actions of hierarchical pore confinement and the biphosphine ligand derived from the POP catalyst contributed to the improved regioselectivity.

Understanding the facet effects of heterogeneous Rh2P catalysts for styrene hydroformylation

Rh2P (111) facets are much more active than the other facets for heterogeneous hydroformylation.

Recent development towards alkene hydroformylation catalysts integrating traditional homo- and heterogeneous catalysis

This mini-review provides the recent progress towards catalysts for the hydroformylation of catalysts that bridge traditional homo- and heterogeneous catalysis, highlighting the future development of heterogeneous catalysts in hydroformylation.

A heterogeneous Rh/CPOL-BINAPa&PPh3 catalyst for hydroformylation of olefins: chemical and DFT insights into active species and the roles of BINAPa and PPh3

A reusable Rh/CPOL-BINAPa&PPh3 catalyst was used for heterogeneous hydroformylation of olefins, affording the corresponding linear aldehydes with excellent regioselectivities and high TON values. The active Rh–H species were studied in detail.

Phosphorus containing porous organic polymers: synthetic techniques and applications in organic synthesis and catalysis

The phosphorus-containing porous organic polymer is a trending material for the synthesis of heterogeneous catalysts. Decades of investigations have established phosphines as versatile ligands in homogeneous catalysis. Recently, phosphine-based heterogeneous catalysts were synthesized to exploit the same electronic properties while leveraging extra stability and reusability. In the last few decades, the catalysts were applied in diverse organic transformations, including hydroformylation, hydrogenation, C-C, C-N and C-X coupling, hydrosilylation, oxidative-carbonylation reactions, and so on. However, even though these polymers possess a multifunctional character, they face multiple synthetic issues in controlling the pore size, increasing the surface area, and creating a single type of active site. This review summarizes the developments in this field over the last few decades, highlighting the current limitation and future scope.

Highly Efficient Heterogeneous Pd@POPs Catalyst for the N-Formylation of Amine and CO2

Utilization of CO2 for the production of fine chemicals has become a research hotspot for a long time. In order to make use of CO2, we developed a highly efficient heterogeneous catalyst (denoted as Pd@POPs) for the N-formylation reaction of amine and CO2 under mild conditions. The Pd catalyst was based on a porous organic polymer derived from the solvothermal polymerization of vinyl-functionalized PPh3. A series of characterizations and comparative experiments demonstrated that the Pd@POPs catalyst has high BET (Brunauer-Emmett-Teller) surface areas, hierarchical pore structure, and uniform dispersion of Pd active sites resulting from the formation of strong coordination bonds between Pd species and P atoms in the porous organic polymer (POP) support. In addition to the excellent activity, the Pd@POPs catalyst shows good stability for the N-formylation reaction of amine and CO2.

Rh-catalyzed highly regioselective hydroformylation to linear aldehydes by employing porous organic polymer as a ligand

In this work, we developed a new structural porous organic polymer containing biphosphoramidite unit, which can be used as a solid bidentate phosphorous ligand for rhodium-catalyzed solvent-free higher olefins hydroformylation. The resultant catalyst demonstrated unprecedently high regioselectivity to linear aldehydes and could be readily recovered for successive reuses with good stability in both catalytic activity and regioselectivity.

A porous organic polymer as a ligand was designed and prepared for Rh-catalyzed hydroformylation with outstanding activity and unprecedently high regioselectivity to linear aldehyde.

Triazinetriamine-derived porous organic polymer-supported copper nanoparticles (Cu-NPs@TzTa-POP): an efficient catalyst for the synthesis of N-methylated products via CO2 fixation and primary carbamates from alcohols and urea

Copper nanoparticles incorporated triazinetriamine derived porous organic polymer based catalyst was synthesized for catalytic production N-methylated amines and primary carbamates.

Porous Organic Polymer Supported Rhodium as a Reusable Heterogeneous Catalyst for Hydroformylation of Olefins

A new porous organic polymer has been prepared via copolymerization of divinyl-functionalized phosphoramidite ligand and tris(4-vinylphenyl)phosphine. The porous polymer was loaded with Rh(acac)CO₂ to yield a supported Rh catalyst, which demonstrated good regioselectivity ( l/ b = 6.7-52.8) and high catalytic activity (TON up to 45.3 × 10⁴) in hydroformylation of terminal and internal olefins. Remarkably, the heterogeneous catalyst can be reused at least 10 cycles without losing activity and selectivity in hydroformylation of 1-hexene.

Porous organic polymer supported rhodium as a heterogeneous catalyst for hydroformylation of alkynes to α,β-unsaturated aldehydes

A novel porous organic polymer supported rhodium catalyst (Rh/POL-BINAPa&PPh₃) was developed for the hydroformylation of alkynes to afford α,β-unsaturated aldehydes.