Nickel catalyst with atomically-thin meshed cobalt coating for improved durability in dry reforming of methane

Atomic/molecular layer deposition strategies for enhanced CO2 capture, utilisation and storage materials

Elevated levels of carbon dioxide (CO2) in the atmosphere and the diminishing reserves of fossil fuels have raised profound concerns regarding the resulting consequences of global climate change and the future supply of energy. Hence, the reduction and transformation of CO2 not only mitigates environmental pollution but also generates value-added chemicals, providing a dual remedy to address both energy and environmental challenges. Despite notable advancements, the low conversion efficiency of CO2 remains a major obstacle, largely attributed to its inert chemical nature. It is imperative to engineer catalysts/materials that exhibit high conversion efficiency, selectivity, and stability for CO2 transformation. With unparalleled precision at the atomic level, atomic layer deposition (ALD) and molecular layer deposition (MLD) methods utilize various strategies, including ultrathin modification, overcoating, interlayer coating, area-selective deposition, template-assisted deposition, and sacrificial-layer-assisted deposition, to synthesize numerous novel metal-based materials with diverse structures. These materials, functioning as active materials, passive materials or modifiers, have contributed to the enhancement of catalytic activity, selectivity, and stability, effectively addressing the challenges linked to CO2 transformation. Herein, this review focuses on ALD and MLD's role in fabricating materials for electro-, photo-, photoelectro-, and thermal catalytic CO2 reduction, CO2 capture and separation, and electrochemical CO2 sensing. Significant emphasis is dedicated to the ALD and MLD designed materials, their crucial role in enhancing performance, and exploring the relationship between their structures and catalytic activities for CO2 transformation. Finally, this comprehensive review presents the summary, challenges and prospects for ALD and MLD-designed materials for CO2 transformation.

Skeletal Nickel Catalyst for the Methanation Reaction Developed by Laser-Engineered Net-Shaping Technology

Here, we report a skeletal nickel catalyst prepared by cumulative processing. The Ni, Al, and CoCrMo multi-component alloys were printed by a dual-powder laser-engineered net-shaping system, and alloy samples with different components were obtained through high-throughput design. After leaching in 5 mol/L NaOH at 40 °C for 2 h, the specific surface area of the catalyst increased with increasing Al content. Increasing the leaching temperature and prolonging the leaching time also effectively increased the specific surface area of the catalyst. After leaching at 80 °C for 12 h, the specific surface area was 42.36 m2/g. After cleaning and hydrogen-reduction treatment at 400 °C, the catalyst showed high catalytic activity. The highest conversion rate of CO reached 89.56%, and the selectivity of CH4 remained above 98% for a long time.

Effects of alloying for steam or dry reforming of methane: a review of recent studies

A survey on the catalytic nature of Ni-based alloy catalysts in recent years provides a direction for future catalyst development.

Spherical Ni Nanoparticles Supported by Nanosheet-Assembled Al2O3 for Dry Reforming of CH4: Elucidating the Induction Period and Its Excellent Resistance to Coking

The design and preparation of efficient coking-resistant catalysts for dry reforming of methane (DRM) is significant for industrial applications but a challenge for supported Ni catalysts. Nanosheet-assembled Al₂O₃ (NA-Al₂O₃) with hierarchical hollow microspheres was used to support Ni nanoparticles, which exhibits superior long-time stability and coking resistance for the DRM reaction from 700 to 800 °C without coke deposition. Active Ni species, exsolved from NiAl₂O₄ spinel, are aggregated into Ni nanoparticles and finally stabilize as spherical Ni nanoparticles of 18.0 nm due to the spatial confinement of hierarchical hollow microspheres of the NA-Al₂O₃ support after the DRM reaction for 60 h. The catalytic activity in the induction period of the Ni/(NA-Al₂O₃) catalyst increases because of the enhancement of the surface Ni⁰/(Ni⁰+Ni²⁺) ratio, that is, the increment of the amount of active Ni sites. The spherical Ni nanoparticles embedded in the NA-Al₂O₃ support, superior CO₂ adsorption ability, and more surface hydroxyl groups on the Ni/(NA-Al₂O₃) catalyst are the determining factors for its long-time stability and excellent anti-coking for the DRM reaction.

Tuning Metal–Support Interactions on Ni/Al2O3 Catalysts to Improve Catalytic Activity and Stability for Dry Reforming of Methane

Ni-based catalysts supported on alumina derived from the pseudo-boehmite prepared by the impregnation method were employed for catalytic dry reforming of methane reaction at the temperature of 550–750 °C. The effect of calcination temperature on physicochemical properties such as the Ni dispersion, reduction degree, nickel crystallite sizes, and metal–support interaction of the catalysts was investigated. The characterization results show that increasing the catalyst calcination temperature leads to the formation of nickel-alumina spinel, which enhances the metal–support interaction and increases the reduction temperature. The nickel nanoparticle size decreases and the effective dispersion increases with the increasing calcination temperature from 450 °C to 750 °C due to the formation of nickel aluminate. The catalyst calcined at 750 °C exhibits the highest CH4 and CO2 conversion owing to the small Ni0 active sites and high Ni dispersion. In a 200 h stability test in dry reforming of methane at 700 °C, the Ni/Al2O3-750 catalyst exhibits excellent catalytic stability and anti-coking ability.

Designing Nanoparticles and Nanoalloys for Gas-Phase Catalysis with Controlled Surface Reactivity Using Colloidal Synthesis and Atomic Layer Deposition

Supported nanoparticles are commonly applied in heterogeneous catalysis. The catalytic performance of these solid catalysts is, for a given support, dependent on the nanoparticle size, shape, and composition, thus necessitating synthesis techniques that allow for preparing these materials with fine control over those properties. Such control can be exploited to deconvolute their effects on the catalyst's performance, which is the basis for knowledge-driven catalyst design. In this regard, bottom-up synthesis procedures based on colloidal chemistry or atomic layer deposition (ALD) have proven successful in achieving the desired level of control for a variety of fundamental studies. This review aims to give an account of recent progress made in the two aforementioned synthesis techniques for the application of controlled catalytic materials in gas-phase catalysis. For each technique, the focus goes to mono- and bimetallic materials, as well as to recent efforts in enhancing their performance by embedding colloidal templates in porous oxide phases or by the deposition of oxide overlayers via ALD. As a recent extension to the latter, the concept of area-selective ALD for advanced atomic-scale catalyst design is discussed.

Surface functionalization on nanoparticles via atomic layer deposition

As an ultrathin film preparation method, atomic layer deposition (ALD) has recently found versatile applications in fields beyond semiconductors, such as energy, environment, catalysis and so on. The design, preparation and characterization of thin film applied in the emerging fields have attracted great interests. The development of ALD technique on particles opens up a broad horizon in the advanced nanofabrication. Pioneering applications are exploring conformal coating, porous coating and selective surface modification of nanoparticles. Conformal encapsulation of particles is a major application to protect materials with ultrathin films from being eroded by the external environment while keeping the original properties of the primary particles. Porous coating has been developed to simultaneously expose the particles' surface and provide nanopores, which is another important method that demonstrates its advantages in modification of electrode materials, catalysis and energy applications, etc. Selective ALD takes the method forward in order to precisely control the directionality of decoration sites on the particles and selectively passivate undesired facets, sites, or defects. Such methods provide practical strategies for atomic scale and precise surface functionalization on particles and greatly expand its potential applications.

Dry Reforming of Methane Using Ce-modified Ni Supported on 8%PO4 + ZrO2 Catalysts

Dry reforming of methane (DRM) was studied in the light of Ni supported on 8%PO4 + ZrO2 catalysts. Cerium was used to modify the Ni active metal. Different percentage loadings of Ce (1%, 1.5%, 2%, 2.5%, 3%, and 5%) were tested. The wet incipient impregnation method was used for the preparation of all catalysts. The catalysts were activated at 700 °C for ½ h. The reactions were performed at 800 °C using a gas hourly space velocity of 28,000 mL (h·gcat)−1. X-ray diffraction (XRD), N2 physisorption, hydrogen temperature programmed reduction (H2-TPR), temperature programmed oxidation (TPO), temperature programmed desorption (TPD), and thermogravimetric analysis (TGA) were used for characterizing the catalysts. The TGA analysis depicted minor amounts of carbon deposition. The CO2-TPD results showed that Ce enhanced the basicity of the catalysts. The 3% Ce loading possessed the highest surface area, the largest pore volume, and the greatest pore diameter. All the promoted catalysts enhanced the conversions of CH4 and CO2. Among the promoted catalysts tested, the 10Ni + 3%Ce/8%PO4 + ZrO2 catalyst system operated at 1 bar and at 800 °C gave the highest conversions of CH4 (95%) and CO2 (96%). The stability profile of Cerium-modified catalysts (10%Ni/8%PO4 + ZrO2) depicted steady CH4 and CO2 conversions during the 7.5 h time on stream.

Al2O3-Coated Ni/CeO2 nanoparticles as coke-resistant catalyst for dry reforming of methane

To mitigate catalyst deactivation during the dry reforming of methane, Ni/CeO₂ catalysts composed of monodisperse Ni nanoparticles supported on CeO₂ nanorods are designed and coated with Al₂O₃ layers by atomic layer deposition.