Mg modified BaTaO2N as an efficient visible-light-active photocatalyst for water oxidation

Interfacial Design of Particulate Photocatalyst Materials for Green Hydrogen Production

Green hydrogen production using particulate photocatalyst materials has attracted much attention in recent years because this process could potentially lead to inexpensive and scalable solar-to-chemical energy conversion systems. Although the development of efficient particulate photocatalysts enabling one-step overall water splitting (OWS) with solar-to-hydrogen efficiencies in excess of 10 % remains challenging, promising photocatalyst candidates exhibiting OWS activity have been demonstrated. This review provides a comprehensive introduction to the solar-to-hydrogen energy conversion process of semiconductor photocatalyst materials and highlights recent advances in photocatalytic OWS via both one-step and two-step photoexcitation processes. The review also covers recent developments in the photocatalytic OWS of SrTiO3, including the establishment of large-scale photocatalytic systems, interfacial design using cocatalysts to enhance water splitting activity, and its photoelectrochemical (PEC) properties at the electrified solid/liquid interface. In addition, there is a special focus on visible-light-absorbing oxynitride and oxysulfide particulate photocatalysts with absorption edges near 600 nm. Methods for photocatalyst preparation and surface modification, as well as PEC properties, are also discussed. The semiconductor properties of particulate photocatalysts obtained from photoelectroanalytical evaluations using particulate photoelectrodes are evaluated. This review is intended to provide guidelines for the future development of particulate photocatalysts capable of efficient and stable OWS.

Precise analyses of photoelectrochemical reactions on particulate Zn0.25Cd0.75Se photoanodes in nonaqueous electrolytes using Ru bipyridyl complexes as a probe

Recombination of photoexcited carriers at interface states is generally believed to strongly govern the photoelectrochemical (PEC) performance of semiconductors in electrolytes. Sacrificial reagents (e.g., methanol or Na2SO3) are often used to assess the ideal PEC performance of photoanodes in cases of minimised interfacial recombination kinetics as well as accelerated surface reaction kinetics. However, varying the sacrificial reagents in the electrolyte means simultaneously changing the equilibrium potential and the number of electrons required to perform the sacrificial reaction, and thus the thermodynamic and kinetic aspects of the PEC reactions cannot be distinguished. In the present study, we propose an alternative methodology to experimentally evaluate the energy levels of interfacial recombination centres that can reduce PEC performance. We prepare nonaqueous electrolytes containing three different Ru complexes with different bipyridyl ligands; redox reactions of Ru complexes represent one-electron processes with similar charge transfer rates and diffusion coefficients. Therefore, the Ru complexes can serve as a probe to isolate and evaluate only the thermodynamic aspects of PEC reactions. Recombination centres at the interface between a nonaqueous electrolyte and a Zn0.25Cd0.75Se particulate photoanode are elucidated using this method as a model case. The energy level at which photocorrosion proceeds is also determined.

Perovskite BaTaO2 N: From Materials Synthesis to Solar Water Splitting

Barium tantalum oxynitride (BaTaO2 N), as a member of an emerging class of perovskite oxynitrides, is regarded as a promising inorganic material for solar water splitting because of its small band gap, visible light absorption, and suitable band edge potentials for overall water splitting in the absence of an external bias. However, BaTaO2 N still exhibits poor water-splitting performance that is susceptible to its synthetic history, surface states, recombination process, and instability. This review provides a comprehensive summary of previous progress, current advances, existing challenges, and future perspectives of BaTaO2 N for solar water splitting. A particular emphasis is given to highlighting the principles of photoelectrochemical (PEC) water splitting, classic and emerging photocatalysts for oxygen evolution reactions, and the crystal and electronic structures, dielectric, ferroelectric, and piezoelectric properties, synthesis routes, and thin-film fabrication of BaTaO2 N. Various strategies to achieve enhanced water-splitting performance of BaTaO2 N, such as reducing the surface and bulk defect density, engineering the crystal facets, tailoring the particle morphology, size, and porosity, cation doping, creating the solid solutions, forming the heterostructures and heterojunctions, designing the photoelectrochemical cells, and loading suitable cocatalysts are discussed. Also, the avenues for further investigation and the prospects of using BaTaO2 N in solar water splitting are presented.

Defect engineering of two-dimensional Nb-based oxynitrides for visible-light-driven water splitting to produce H2 and O2

Two-dimensional (2D) Nb-based oxynitrides are promising visible-light-responsive photocatalysts for the water splitting reaction, but their photocatalytic activity is degraded by the formation of reduced Nb⁵⁺ species and O^2- vacancies. To understand the influence of nitridation on the formation of crystal defects, this study synthesized a series of Nb-based oxynitrides through the nitridation of LaKNaNb_1-xTa_xO₅ (x = 0, 0.2, 0.4, 0.6, 0.8, 1.0). During nitridation, K and Na species volatilized, which helped transform the exterior of LaKNaNb_1-xTa_xO₅ into a lattice-matched oxynitride shell. Ta inhibited defect formation, yielding Nb-based oxynitrides with a tunable bandgap between 1.77 and 2.12 eV, straddling the H₂ and O₂ evolution potentials. After loading with Rh and CoO_x cocatalysts, these oxynitrides exhibited good photocatalytic activity for H₂ and O₂ evolution in visible light (650-750 nm). The nitrided LaKNaTaO₅ and LaKNaNb_0.8Ta_0.2O₅ delivered the maximum H₂ (19.37 μmol h^-1) and O₂ (22.81 μmol h^-1) evolution rates, respectively. This work provides a strategy for preparing oxynitrides with low defect densities and demonstrates the promising performance of Nb-based oxynitrides for water splitting.

Photodeposition of Fe-Based Cocatalysts Capable of Effectively Promoting the Oxygen Evolution Activity of BaTaO2N

Activation of narrow bandgap photocatalysts is a prerequisite for the efficient production of renewable hydrogen from water using sunlight. Loading of dual cocatalysts intended to promote reduction and oxidation reactions by photodeposition is known to greatly enhance the water splitting activity of certain oxide photocatalysts. However, it is difficult to photodeposit oxygen evolution cocatalysts onto narrow bandgap oxynitride photocatalysts because the driving forces for the necessary oxidation reactions are weak. The present work demonstrates oxidative photodeposition of the Fe-based cocatalyst FeOx onto a Mg-doped BaTaO2N photocatalyst having an absorption edge wavelength of 620 nm. This modification enhances the oxygen evolution activity of the photocatalyst more effectively than conventional impregnation methods. The rapid removal of photoexcited electrons from the photocatalyst by a reduction cocatalyst (Pt) and an electron acceptor (molecular oxygen) are evidently necessary for the photodeposition of the FeOx cocatalyst. A Mg-doped BaTaO2N photocatalyst coloaded with Pt and FeOx exhibits an apparent quantum yield of 1.2% at 420 nm during the oxygen evolution reaction in an aqueous AgNO3 solution. This photodeposition procedure does not involve any heat treatment and so provides new opportunities for the design and construction of oxygen evolution sites on narrow-bandgap non-oxide photocatalysts that may be prone to thermal decomposition.

Pyrochlore-structural Nd2Ta2O5N2 Photocatalyst with Absorption Edge of over 600 nm for Z-scheme Overall Water Splitting

A pyrochlore-structural oxynitride Nd2Ta2O5N2 with a visible light absorption edge of ca. 620 nm was explored for photocatalytic water splitting. Dual functions of Nd2Ta2O5N2 were confirmed by proton reduction and...

Nanostructure Engineering and Modulation of (Oxy)Nitrides for Application in Visible-Light-Driven Water Splitting

(Oxy)nitride-based nanophotocatalysts have been extensively investigated for solar-to-chemical conversion, and not only allow wide spectral utilization to achieve high theoretical energy conversion efficiency but also exhibit suitable conduction and valence band positions for robust reduction and oxidation of water. During the past decades, a few reviews on the research progress in designing and synthesizing new visible-light-responsive semiconductors for various applications in solar-to-chemical conversion have been published. However, those on the effects of their bulk and composite (surface/interface) nanostructures on basic processes as well as solar water splitting performances to produce hydrogen are still limited. In this review, a brief introduction on the relationship between the nanostructure photocatalytic properties is included. Three main processes of solar water splitting are involved, allowing the elucidation of the correlation with the nanostructural properties of the photocatalyst such as surface/interface, size, morphology, and bulk structure. Subsequently, the development of methodologies and strategies for modulating the bulk and composite structures to improve the efficiencies of the basic processes, particularly charge separation, is summarized in detail. Finally, the prospects of (oxy)nitride-based photocatalysts such as controlled synthesis, modulation of 1D/2D morphology, exposed facet regulation, heterostructure formation, theoretical simulation, and time- and space-resolved spectroscopy are discussed.

Stable and efficient solar-driven photoelectrochemical water splitting into H2 and O2 based on a BaTaO2N photoanode decorated with CoO microflowers

Stable and efficient photoelectrochemical water splitting has been achieved using a BaTaO2N photoanode decorated with CoO microflowers. The CoO microflowers effectively collect holes from BaTaO2N which kinetically protects BaTaO2N against photocorrosion. A Faraday efficiency of almost unity (99.2%) has been recorded for O2 evolution reactions. The tips of the CoO microflowers are the most active sites for water oxidation reactions.

Sequential cocatalyst decoration on BaTaO2N towards highly-active Z-scheme water splitting

Oxynitride photocatalysts hold promise for renewable solar hydrogen production via water splitting owing to their intense visible light absorption. Cocatalyst loading is essential for activation of such oxynitride photocatalysts. However, cocatalyst nanoparticles form aggregates and exhibit weak interaction with photocatalysts, which prevents eliciting their intrinsic photocatalytic performance. Here, we demonstrate efficient utilization of photoexcited electrons in a single-crystalline particulate BaTaO₂N photocatalyst prepared with the assistance of RbCl flux for H₂ evolution reactions via sequential decoration of Pt cocatalyst by impregnation-reduction followed by site-selective photodeposition. The Pt-loaded BaTaO₂N photocatalyst evolves H₂ over 100 times more efficiently than before, with an apparent quantum yield of 6.8% at the wavelength of 420 nm, from a methanol aqueous solution, and a solar-to-hydrogen energy conversion efficiency of 0.24% in Z-scheme water splitting. Enabling uniform dispersion and intimate contact of cocatalyst nanoparticles on single-crystalline narrow-bandgap particulate photocatalysts is a key to efficient solar-to-chemical energy conversion.

Visible-light-driven photocatalytic water oxidation over LaNbON2–LaMg2/3Nb1/3O3 solid solutions

Solid solutions (LaNbON₂)_1−x(LaMg_2/3Nb_1/3O₃)_x (0.0 ≤ x ≤ 1.0) show promising photocatalytic activity for water oxidation into oxygen under visible light illumination (λ ≥ 420 nm).