F dopants triggered active sites in bifunctional cobalt sulfide@nickel foam toward electrocatalytic overall water splitting in neutral and alkaline media: Experiments and theoretical calculations

Two Electrocatalytic Selenoarsenates with Manganese Complex Cations as Counterions

The discovery of new organic hybrid chalcogenidometalates is of great importance for structural chemistry and functional material. Here, new types of organic hybrid selenoarsenates [Mn(dien)2]2[AsII4Se6] (1, dien = diethylenetriamine) and [Mn(dien)2]2[Mn(AsIIISe3)2] (2) have been solvothermally synthesized by the reaction of K3AsO3, Se, and MnCl2·xH2O (x = 0, 2) in dien solution at 120 °C. 1 presents a hitherto unknown [AsII4Se6]4- anion with low-valent As2+ ion, which comprises a centrosymmetric six-membered [AsII4Se2] ring in chair-like conformation, while 2 contains a new type of heterometallic selenoarsenate(III) [Mn(AsIIISe3)2]4- constructed by the connection of one tetrahedral [MnSe4] and two rare noncondensed [AsIIISe3]3- anions. 1 and 2 were first combined with nickel nanoparticle (Ni) and the nickel foam (NF) for fabricating the 1/Ni/NF and 2/Ni/NF electrodes, which exhibited excellent oxygen evolution reaction electrocatalytic property with a low overpotential of 248 mV for 1 and 219 mV for 2 at 10 mA cm-2 in alkaline media.

Unraveling the Synergy of Anion Modulation on Co Electrocatalysts by Pulsed Laser for Water Splitting: Intermediate Capturing by In Situ/Operando Raman Studies

Herein, the authors produce Co-based (Co₃ (PO₄ )₂ , Co₃ O₄ , and Co₉ S₈ ) electrocatalysts via pulsed laser ablation in liquid (PLAL) to explore the synergy of anion modulation on phase-selective active sites in the electrocatalytic hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Co₃ (PO₄ )₂ displays an ultralow overpotential of 230 mV at 10 mA cm^-2 with 48.5 mV dec^-1 Tafel slope that outperforms the state-of-the-art Ir/C in OER due to its high intrinsic activity. Meanwhile, Co₉ S₈ exhibits the highest HER performance known to the authors among the synthesized Co-based catalysts, showing the lowest overpotential of 361 mV at 10 mA cm^-2 with 95.8 mV dec^-1 Tafel slope in the alkaline medium and producing H₂ gas with ≈500 mmol g^-1 h^-1 yield rate under -0.45 V versus RHE. The identified surface reactive intermediates over in situ electrochemical-Raman spectroscopy reveal that cobalt(hydr)oxides with higher oxidation states of Co-cation forming under oxidizing potentials on the electrode-electrolyte surface of Co₃ (PO₄ )₂ facilitate the OER, while Co(OH)₂ facilitate the HER. Notably, the fabricated two-electrode electrolyzers using Co₃ (PO₄ )₂ , Co₃ O₄ , and Co₉ S₈ electrocatalysts deliver the cell potentials ≈2.01, 2.11, and 1.89 V, respectively, at 10 mA cm^-2 . This work not only shows PLAL-synthesized electrocatalysts as promising candidates for water splitting, but also provides an underlying principle for advanced energy-conversion catalysts and beyond.

Metallic Co and crystalline Co-Mo oxides supported on graphite felt for bifunctional electrocatalytic hydrogen evolution and urea oxidation

Oxygen evolution reaction (OER) and urea oxidation reaction (UOR) play important roles in the field of hydrogen energy preparation and pollution treatment. In this work, by merging bimetallic Co-Mo oxides with metallic Co on the graphite felt (GF), we effectively manufacture a 3D bifunctional and highly efficient electrocatalyst (CoMoO@Co/GF) with multi-site functionality for the simultaneous reduction of water and the oxidation of urea in an alkaline medium. The presence of metallic Co causes Co-Mo oxides to evolve from amorphous to crystalline structures. The coupling interface produced between metallic Co and Co-Mo oxides is proven to facilitate electron transport in addition to extensively accessible and highly electroactive Co-Mo oxide nanoflower architecture. The experimental results reveal that the overpotentials for OER and UOR in the CoMoO@Co/GF electrode require only 269 and 115 mV to obtain a current density of 10 mA cm^-2, respectively. Furthermore, with the aid of urea, the overpotential for HER at the current density of 10 mA cm^-2 is lowered to 155 mV. Most notably, the constructed CoMoO@Co/GF-based electrolytic cell only requires a 1.5 V dry battery to achieve effective H₂ evolution and noteworthy stability, outperforming the commercial catalyst-based device and many previous results. The combination of experiments and theoretical calculations further clarifies the active sites in the catalyst. What's more, the pathway of electron transfer in the catalytic process is defined.

Synergistic mechanism of Ni(OH)2/NiMoS heterostructure electrocatalyst with crystalline/amorphous interfaces for efficient hydrogen evolution over all pH ranges

Designing and fabricating efficient electrocatalysts is a practical step toward the commercial application of the efficient hydrogen evolution reaction (HER) over all pH ranges. Herein, novel Ti@Ni(OH)₂-NiMoS heterostructure with interface between crystalline Ni(OH)₂ and amorphous NiMoS was rationally designed and fabricated on Ti mesh (denoted as Ti@Ni(OH)₂-NiMoS). Acid etching and calcination experiments helped in accurate elucidation of the synergistic mechanism as well as the vital role on crystalline Ni(OH)₂ and amorphous NiMoS. In acidic solutions, the HER performance of Ti@Ni(OH)₂-NiMoS was mainly attributed to the amorphous NiMoS. In neutral, alkaline, and natural seawater solutions, the HER performance was mainly determined by the synergistic interface behaviors between the Ni(OH)₂ and NiMoS. The crystalline Ni(OH)₂ accelerated water dissociation kinetics, while the amorphous NiMoS provided abundant active sites and allowed for fast electron transfer rates. To deliver current densities of 10 mA·cm^-2 in acidic, neutral, alkaline, and natural seawater solutions, the Ti@Ni(OH)₂-NiMoS required overpotentials of 138, 198, 180 and 371 mV, respectively. This paper provides general guidelines for designing efficient electrocatalyst with crystalline/amorphous interfaces for efficient hydrogen evolution over all-pH ranges.

Photocatalytic Degradation of Methylene Blue and Antibacterial Activity of Mesoporous TiO2-SBA-15 Nanocomposite Based on Rice Husk

Concerns have been increased regarding the existence of pollutants in environmental water resources and their risks to the ecosystem and human society. TiO2 photocatalyst is considered as an effective photocatalyst to remove the pollutants. Herein, the mesoporous TiO2-SBA-15 was prepared using the rice husk extract as the silica source. The fabricated nanocomposites were characterized using FTIR, small and wide angle XRD, Raman spectroscopy, UV-vis, BET surface area analysis, and HRTEM. The photocatalytic efficiency of the composites for the degradation of methylene blue (MB) has been evaluated under UV irradiation. Interestingly, due to the excellent dispersion of TiO2 on the wall of SBA-15 and good hydrophilicity, the nanocomposites displayed a good catalytic activity. The higher photodegradation performance was achieved by the composite containing 10 wt% TiO2 by which the MB was fully degraded within 15-20 min of irradiation. Besides, TiO2-SBA-15 could effectively inhibit the growth of Gram-positive and Gram-negative bacteria. These results offer a practical and economic approach in the environmental management industries.

Interface engineering of cobalt-sulfide-selenium core-shell nanostructures as bifunctional electrocatalysts toward overall water splitting

The number of active sites and stability of the structure of electrocatalysts are the key factors in the process of overall water splitting. In this paper, cobalt-sulfide-selenium (Se:CoS_2-x) core-shell nanostructures are prepared by a simple two-step method, including hydrothermal reaction and chemical vapor deposition. The resulting product exhibits excellent electrochemical performance, owing to the synergistic effects between CoS₂ and CoSe_1-x, as well as the plentiful active sites in the electrode structure. The Se:CoS_2-x material shows a more improved hydrogen evolution reaction activity compared to CoS₂ and Co(OH)Cl precursor catalysts, with a low overpotential of only 240 mV achieved at 10 mA cm^-2. Meanwhile, Se:CoS_2-x as a bifunctional water splitting catalyst also shows remarkably improved oxygen evolution reaction activity, with a low overpotential of only 1.32 V at 10 mA cm^-2. The above results show that selenide/sulfide materials provide a new research direction for discovering high-performance and cheap electrode materials.

Oxygen vacancy-rich doped CDs@graphite felt-600 heterostructures for high-performance supercapacitor electrodes

Carbon dots (CDs) have attracted much attention owing to their distinctive 0D chemical structure, ultra-small size, and intrinsic surface/edge defects, and have been widely used in many kinds of research fields. In this work, a facile method to synthesize an oxygen vacancy-rich doped CDs@graphite felt-600 heterostructure with outstanding electrochemical properties is presented. The electron spin resonance (ESR) provides clear evidence for the existence of abundant oxygen vacancies in the CDs@graphite felt-600 heterostructure. The as-synthesized CDs@graphite felt-600 shows superior areal specific capacitance (5.99 F cm-2), due to abundant oxygen vacancies and extensive surface/edge defects in the heterostructure. In addition, a home-made coin cell supercapacitor (SC) with CDs@graphite felt-600 as the electrode delivers a large areal energy density of 20.7 μW h cm-2 at a power density of 150.0 μW cm-2. To determine the charge storage mechanism at the interface of CDs@graphite felt-600, the binding energies between the CDs and graphite felt are calculated by density functional theory (DFT).

Progress and challenges of metal-organic frameworks-based materials for SR-AOPs applications in water treatment

As environmental problems become more and more severe, sulfate radical (SO₄^-) based advanced oxidation processes (SR-AOPs) are widely recognized for their high removal efficiency of recalcitrant organic pollutants in water. Metal-organic frameworks (MOFs) have attracted wide attention in SR-AOPs due to their outstanding properties (e.g. large surface area, ultra-high porosity, and diversity of material design, etc). Herein, we present an overview of the development and challenges in the synthesis of different types of MOFs, combination of MOFs with other materials (metal centers, conductors, cellulose, etc.) and the construction of catalysts with special structures (core-shell structures and hollow structures) as well as their applications in SR-AOPs for the degradation of organic pollutants. Several review papers have already mentioned the application of a branch of MOFs or simple composites of MOFs in SR-AOP, whereas the latest progresses on the application of MOFs-based materials to SR-AOPs was described rarely. Besides, the degradation mechanism of MOFs as catalysts has not been systematically discussed. To this end, the mechanisms of MOFs and MOF-based materials as catalysts to activate PMS/PS in different systems are analyzed, including radicals and non-radicals pathways. Meanwhile, considering that the research in this field is still in its infancy, a lot of improvements are still needed to effectively promote and implement this technology.

Recent advances in application of graphitic carbon nitride-based catalysts for degrading organic contaminants in water through advanced oxidation processes beyond photocatalysis: A critical review

Advanced oxidation processes (AOPs) have attracted much interest in the field of water treatment owing to their high removal efficiency for refractory organic contaminants. Graphitic carbon nitride (g-C₃N₄)-based catalysts with high performance and cost effectiveness are promising heterogeneous catalysts for AOPs. Most research on g-C₃N₄-based catalysts focuses on photocatalytic oxidation, but increasingly researchers are paying attention to the application of g-C₃N₄-based catalysts in other AOPs beyond photocatalysis. This review aims to concisely highlight recent state-of-the-art progress of g-C₃N₄-based catalysts in AOPs beyond photocatalysis. Emphasis is made on the application of g-C₃N₄-based catalysts in three classical AOPs including Fenton-based processes, catalytic ozonation and persulfates activation. The catalytic performance and involved mechanism of g-C₃N₄-based catalysts in these AOPs are discussed in detail. Meanwhile, the effect of water chemistry including pH, water temperature, natural organic matter, inorganic anions and dissolved oxygen on the catalytic performance of g-C₃N₄-based catalysts are summarized. Moreover, the reusability, stability and toxicity of g-C₃N₄-based catalysts in water treatment are also mentioned. Lastly, perspectives on the major challenges and opportunities of g-C₃N₄-based catalysts in these AOPs are proposed for better developments in the future research.