Methane dry reforming on supported cobalt nanoparticles promoted by boron

Unearthing Atomic Dynamics in Nanocatalysts

Being able to access the rich atomic-scale phenomenology, which occurs during the reactions pathways, is a pressing need toward the pursued knowledge-based design of more efficient nanocatalysts, precisely tailored atom by atom for each reaction. However, to reach this goal of achieving maximum optimization, it is mandatory, first, to address how exposure to the experimental conditions, which will be needed to activate the processes, affects the internal configuration of the nanoparticles at the atomic level. In particular, the most critical experimental parameter is probably the temperature, which among other unwanted effects can induce nanocatalyst aggregation. This work highlights the high potential of experimental techniques such as the scanning probe microscopies, which are able to investigate matter in real space with atomic resolution, to reach the key challenge in heterogeneous catalysis of achieving access to the atomic-scale processes taking place in the nanocatalysts. Specifically, the phenomenology occurring in a nanoparticle system during annealing is studied with atomic precision by scanning tunneling microscopy. As a result, the existence of an internal atomic restructuring, occurring already at relatively low temperatures, within Ir nanoparticles grown over h-BN/Ru(0001) surfaces is demonstrated. Such restructuration, which reduces the undercoordination of the outer Ir atoms, is expected to have a significant effect on the reactivity of the nanoparticles. Going a step further, an internal restructuring of the nanoparticles during their involvement as catalysts has also been also identified.

Highly Stable Ni-B/Honeycomb-Structural Al2O3 Catalysts for Dry Reforming of Methane

Two-component catalysts have garnered significant attention in the field of catalysis due to their ability to inhibit Ni sintering. In the present work, honeycomb-structuralstructured Al2O3-supported Ni and B were prepared to enhance coke tolerance during dry reforming of methane (DRM). Transmission electron microscopy (TEM) results revealed that the average particle sizes on Ni/Al2O3 and Ni-0.16B/Al2O3 were 7.6 nm and 4.2 nm, respectively, indicating that B can effectively inhibit Ni sintering. After a 100-hour reaction, the conversion of CH4 and CO2 on Ni/Al2O3 decreased by approximately 5 %, whereas on Ni-0.16B/Al2O3, there was no significant decrease in CH4 and CO2 conversion, with values of approximately 81.6 % and 87.2 %, respectively. In situ DRIFT spectra demonstrated that Ni-0.16B/Al2O3 enhanced the activation of CO2, thus improving the catalyst's stability. A Langmuir-Hinshelwood-Hougen-Watson (LHHW) model was developed for intrinsic kinetics, and the resulting kinetic expressions were well-fitted fit to the experimental data, with R2 values exceeding 0.9. ActivationThe activation energies were also calculated. The outstanding stability of Ni-0.16B/Al2O3 can be attributed to its stable honeycomb structure and B's ability to significantly inhibit Ni sintering, reduce catalyst particle size, and enhance coke tolerance.

Activation and Transformation of Methane on Boron-Doped Cobalt Oxide Cluster Cations CoBO2. Inorg Chem 2024;63:1537-1542. [PMID: 38181068 DOI: 10.1021/acs.inorgchem.3c03112] [Citation(s) in RCA: 0] [Impact Index Per Article: 0]

The cleavage of inert C-H bonds in methane at room temperature and the subsequent conversion into value-added products are quite challenging. Herein, the reactivity of boron-doped cobalt oxide cluster cations CoBO2+ toward methane under thermal collision conditions was studied by mass spectrometry experiments and quantum-chemical calculations. In this reaction, one H atom and the CH3 unit of methane were transformed separately to generate the product metaboric acid (HBO2) and one CoCH3+ ion, respectively. Theoretical calculations strongly suggest that a catalytic cycle can be completed by the recovery of CoBO2+ through the reaction of CoCH3+ with sodium perborate (NaBO3), and this reaction generates sodium methoxide (CH3ONa) as the other value-added product. This study shows that boron-doped cobalt oxide species are highly reactive to facilitate thermal methane transformation and may open a way to develop more effective approaches for methane (CH4) activation and conversion under mild conditions.

Supercritical fluid-assisted modification combined with the resynthesis of SmCoO3 as an effective tool to enhance the long-term performance of SmCoO3-derived catalysts for the dry reforming of methane to syngas

The dry reforming of methane to syngas (DRM) is of increasing significance concerning, first, the production of raw materials for commercial organic/petrochemical syntheses and for hydrogen energetic, and, second, the utilization of two most harmful greenhouse gases. Herein, new SmCoO₃-based DRM catalysts derived from heterometallic precursors and operated without preliminary reduction are reported. For the first time, the effect of supercritical fluids-assisted modification of the SmCoO₃-derived catalysts combined with the re-oxidation of spent catalysts to SmCoO₃ onto its long-term performance was studied. In particular, the modification of heterometallic precursors by supercritical antisolvent precipitation (SAS) considerably decreases coke formation upon the exploitation of the derived SmCoO₃ sample. Moreover, the re-oxidation of the corresponding spent catalysts followed by pre-heating under N₂ affords catalysts that stably provide syngas yields of 88-95% for at least 41 h at 900 °C. The achieved yields are among the highest ones currently reported for DRM catalysts derived from both LnMO₃ perovskites and related oxides. The origins of such good performance are discussed. Given the simplicity and availability of all the applied methods and chemicals, this result opens prospects for exploiting SAS in the design of efficient DRM catalysts.

Catalysis of Alloys: Classification, Principles, and Design for a Variety of Materials and Reactions

Alloying has long been used as a promising methodology to improve the catalytic performance of metallic materials. In recent years, the field of alloy catalysis has made remarkable progress with the emergence of a variety of novel alloy materials and their functions. Therefore, a comprehensive disciplinary framework for catalytic chemistry of alloys that provides a cross-sectional understanding of the broad research field is in high demand. In this review, we provide a comprehensive classification of various alloy materials based on metallurgy, thermodynamics, and inorganic chemistry and summarize the roles of alloying in catalysis and its principles with a brief introduction of the historical background of this research field. Furthermore, we explain how each type of alloy can be used as a catalyst material and how to design a functional catalyst for the target reaction by introducing representative case studies. This review includes two approaches, namely, from materials and reactions, to provide a better understanding of the catalytic chemistry of alloys. Our review offers a perspective on this research field and can be used encyclopedically according to the readers' individual interests.

Prospects and Technical Challenges in Hydrogen Production through Dry Reforming of Methane

Environmental issues related to greenhouse gases (GHG) emissions have pushed the development of new technologies that will allow the economic production of low-carbon energy vectors, such as hydrogen (H2), methane (CH4) and liquid fuels. Dry reforming of methane (DRM) has gained increased attention since it uses CH4 and carbon dioxide (CO2), which are two main greenhouse gases (GHG), as feedstock for the production of syngas, which is a mixture of H2 and carbon monoxide (CO) and can be used as a building block for the production of fuels. Since H2 has been identified as a key enabler of the energy transition, a lot of studies have aimed to benefit from the environmental advantages of DRM and to use it as a pathway for a sustainable H2 production. However, there are several challenges related to this process and to its use for H2 production, such as catalyst deactivation and the low H2/CO ratio of the syngas produced, which is usually below 1.0. This paper presents the recent advances in the catalyst development for H2 production via DRM, the processes that could be combined with DRM to overcome these challenges and the current industrial processes using DRM. The objective is to assess in which conditions DRM could be used for H2 production and the gaps in literature data preventing better evaluation of the environmental and economic potential of this process.

Kinetic Monte Carlo simulations of the dry reforming of methane catalyzed by the Ru (0001) surface based on density functional theory calculations

This study shows the main pathways for the DRM reaction and the competitive RWGS reaction upon changing reaction conditions, displaying the importance of including lateral–lateral interactions to describe the reaction in agreement with the experiment.

Direct Visualization of Substitutional Li Doping in Supported Pt Nanoparticles and Their Ultra-selective Catalytic Hydrogenation Performance

It has only recently been established that doping light elements (lithium, boron, and carbon) into supported transition metals can fill interstitial sites, which can be observed by the expanded unit cell. As an example, interstitial lithium (^int Li) can block H filling octahedral interstices of palladium metal lattice, which improves partial hydrogenation of alkynes to alkenes under hydrogen. In contrast, herein, we report ^int Li is not found in the case of Pt/C. Instead, we observe for the first time a direct 'substitution' of Pt with substitutional lithium (^sub Li) in alternating atomic columns using scanning transmission electron microscopy-annular dark field (STEM-ADF). This ordered substitutional doping results in a contraction of the unit cell as shown by high-quality synchrotron X-ray diffraction (SXRD). The electron donation of d-band of Pt without higher orbital hybridizations by ^sub Li offers an alternative way for ultra-selectivity in catalytic hydrogenation of carbonyl compounds by suppressing the facile CO bond breakage that would form alcohols.

Interstitial and substitutional light elements in transition metals for heterogeneous catalysis

The addition of foreign element dopants to monometallic nanoparticle catalysts is of great importance in industrial applications. Both substitutional and interstitial doping of pure metallic phases can give profound effects such as altering electronic and transport properties, lattice parameters, phase transitions, and consequently various physicochemical properties. For transition metal catalysts, this often leads to changes in catalytic activity and selectivity. This article provides an overview of the recent developments regarding the catalytic properties and characterisation of such systems. In particular, the structure-activity relationship for a number of important chemical reactions is summarised and the future prospects of this area are also explored.