Theoretical insight into oxidation catalysis of chromite spinel MCr2O4 (M = Mg, Co, Cu, and Zn): Volcano plot for oxygen-vacancy formation and catalytic activity

MgCr2O4-Modified CuO/Cu2O for High-Temperature Thermochemical Energy Storage with High Redox Activity and Sintering Resistance

Metal oxides as high-temperature thermochemical energy storage systems with high energy density based on the gas-solid reaction are a critical demand for the future development of concentrated solar power plants. A copper-based system has high enthalpy change and low cost, but its serious sintering leads to poor reactivity. In this study, MgCr₂O₄ is decorated on the CuO/Cu₂O surface to effectively increase the sintering temperature and alleviate the sintering problem. The re-oxidation degree is increased from 46 to 99.9%, and the reaction time is shortened by 3.7 times. The thermochemical energy density of storage and release reach -818.23 and 812.90 kJ/kg, respectively. After 600 cycles, the oxidation activity remains 98.77%. Material characterization elucidates that nanosized MgCr₂O₄ is uniformly loaded on the surface of CuO/Cu₂O during the reversible reaction, and there is a strong interaction between metal oxides and prompter. Density functional theory (DFT) calculation further confirms that CuO/Cu₂O-MgCr₂O₄ has large binding energy and the formation energy of copper vacancy increases, which can effectively inhibit sintering. The modification mechanism of CuO/Cu₂O by MgCr₂O₄ is revealed, which can provide guidance for the reasonable design of thermochemical energy storage materials with sintering resistance and redox activity.

Biological investigation of a novel nanocomposite based on functionalized graphene oxide nanosheets with pectin, silk fibroin and zinc chromite nanoparticles

For biotechnology applications, a novel nanobiocomposite was synthesized based on modification of graphene oxide (GO) by extracted silk fibroin (SF), natural polymer pectin (Pec) and zinc chromite (ZnCr₂O₄) nanoparticles (NPs). The structure and properties of hybrid nanobiocomposite GO-Pec/SF/ZnCr₂O₄ such as thermal stability, less toxicity, biocompatibility, antibacterial, and biodegradable were proved by using field emission scanning electron microscope (FE-SEM), Fourier-transformed infrared (FT-IR), Energy dispersive X-ray spectroscopy (EDS), thermal gravimetric analysis (TGA), and X-Ray diffraction (XRD). According to the biological features of substances, the GO-Pec/SF/ZnCr₂O₄ nanobiocomposite shows perfect results in MTT (83.71 %) and Hemolysis (16.52 %) assays. accordingly, mentioned properties of this nanobiocomposite can be used as a scaffold for medical applications.

Factors determining surface oxygen vacancy formation energy in ternary spinel structure oxides with zinc

Spinel oxides are an important class of materials for heterogeneous catalysis including photocatalysis and electrocatalysis. The surface O vacancy formation energy (E_Ovac) is a critical quantity for catalyst performance because the surface of metal oxide catalysts often acts as a reaction site, for example, in the Mars-van Krevelen mechanism. However, experimental evaluation of E_Ovac is very challenging. We obtained the E_Ovac for (100), (110), and (111) surfaces of normal zinc-based spinel oxides ZnAl₂O₄, ZnGa₂O₄, ZnIn₂O₄, ZnV₂O₄, ZnCr₂O₄, ZnMn₂O₄, ZnFe₂O₄, and ZnCo₂O₄. The most stable surface is (100) for all compounds. The smallest E_Ovac for a surface is the largest in the (100) surface except for ZnCo₂O₄. For (100) and (110) surfaces, there is a good correlation, over all spinels, between the smallest E_Ovac for the surface and bulk formation energy, while the ionization potential correlates well in (111) surfaces. Machine learning over E_Ovac of all surface sites in all orientations and for all compounds to find the important factors, or descriptors, that decide the E_Ovac revealed that bulk and surface-dependent descriptors are the most important, namely the bulk formation energy, a Boolean descriptor of whether the surface is (111) or not, and the ionization potential, followed by geometrical descriptors that are different in each O site.