1D metal-dithiolene wires as a new class of bi-functional oxygen reduction and evolution single-atom electrocatalysts

Single Transition-Metal Atom Anchored on a Rhenium Disulfide Monolayer: An Efficient Bifunctional Electrocatalyst for the Oxygen Evolution and Oxygen Reduction Reactions

Developing efficient oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) bifunctional electrocatalysts is attractive for rechargeable metal-air batteries. Meanwhile, single metal atoms embedded in 2D layered transition metal chalcogenides (TMDs) have become a very promising catalyst. Recently, many attentions have been paid to the 2D ReS2 electrocatalyst due to its unique distorted octahedral 1T' crystal structure and thickness-independent electronic properties. Here, the catalytic activity of different transition metal (TM) atoms embedded in ReS2 using the density functional theory is investigated. The results indicate that TM@ReS2 exhibits outstanding thermal stability, good electrical conductivity, and electron transfer for electrochemical reactions. And the Ir@ReS2 and Pd@ReS2 can be used as OER/ORR bifunctional electrocatalysts with a lower overpotential for OER (ηOER) of 0.44 V and overpotentials for ORR (ηORR) of 0.26 V and 0.27 V, respectively. The excellent catalytic activity is attributed to the optimal adsorption strength for oxygen intermediates coming from the effective modulation of the electronic structure of ReS2 after Ir/Pd doping. The results can help to deeply understand the catalytic activity of TM@ReS2 and develop novel and highly efficient OER/ORR electrocatalysts.

Highly enhanced electrocatalytic OER activity of water-coordinated copper complexes: effect of lattice water and bridging ligand

The use of metal-organic compounds as electrocatalysts for water splitting reactions has gained increased attention; however, a fundamental understanding of the structural requirement for effective catalytic activity is still limited. Herein, we synthesized water-coordinated mono and bimetallic copper complexes (CuPz-H2O·H2O, CuPz-H2O, CuBipy-H2O·H2O, and CuMorph-H2O) with varied intermetallic spacing (pyrazine/4,4'-bipyridine) and explored the structure-dependent oxygen evolution reaction (OER) activity in alkaline medium. Single crystal structural studies revealed water-coordinated monometallic complexes (CuMorph-H2O) and bimetallic complexes (CuPz-H2O·H2O, CuPz-H2O, CuBipy-H2O·H2O). Further, CuPz-H2O·H2O and CuBipy-H2O·H2O contained lattice water along with coordinated water. Interestingly, the bimetallic copper complex with lattice water and shorter interspacing between the metal centres (CuPz-H2O·H2O) showed strong OER activity and required an overpotential of 228 mV to produce a benchmark current density of 10 mA cm-2. Bimetallic copper complex (CuPz-H2O) without lattice water but the same intermetallic spacing and bimetallic complex with increased interspacing but with lattice water (CuBipy-H2O·H2O) exhibited relatively lower OER activity. CuPz-H2O and CuBipy-H2O·H2O required an overpotential of 236 and 256 mA cm-2, respectively. Monometallic CuMorph-H2O showed the lowest OER activity (overpotential 271 mV) compared to bimetallic complexes. The low Tafel slope and charge transfer resistance of CuPz-H2O·H2O facilitated faster charge transfer kinetics at the electrode surface and supported the enhanced OER activity. The chronoamperometric studies indicated good stability of the catalyst. Overall, the present structure-electrocatalytic activity studies of copper complexes might provide structural insight for designing new efficient electrocatalysts based on metal coordination compounds.

Enabling multifunctional electrocatalysts by modifying the basal plane of unifunctional 1T'-MoS2 with anchored transition metal single atoms

Multifunctional electrocatalysts for hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR) are attractive for overall water-splitting, rechargeable metal-air batteries, and unitized regenerative fuel cells. A single-atom catalyst (SAC) may exhibit additional advantages over its nanoparticle counterpart, and already there have been significant advances in the development of bifunctional and trifunctional SACs for HER, ORR, and OER, but great challenges remain for their rational design. Herein, we propose a strategy to realize multifunctional SACs, i.e., modifying unifunctional materials to introduce new active sites on the surface. Specifically, by virtue of the intrinsic excellent HER performance of 1T'-MoS₂, we theoretically design multifunctional SACs by anchoring appropriate transition-metal single atoms. Intriguingly, 1T'-MoS₂ with supported Co single atoms (Co@MoS₂) are demonstrated to be highly active for both OER and ORR with ultralow overpotentials of less than 0.3 V, ascribed to the moderate chemical activity and unique electronic structure of the Co atomic center. Consequently, combining the intrinsic HER activity of 1T'-MoS₂, Co@MoS₂ is proposed to be promising efficient trifunctional SACs. Further, the phase engineering on SACs is unrevealed and elucidated by comparing the properties of the Co atomic center-supported on 1T'-MoS₂ and 1H-MoS₂. This work provides a feasible strategy for the design of multifunctional SACs for the renewable and sustainable energy technology and provides an insight into the phase engineering on SACs.

Imidazolatic-Framework Bimetal Electrocatalysts with a Mixed-Valence Surface Anchored on an rGO Matrix for Oxygen Reduction, Water Splitting, and Dye Degradation

This paper presents a simple strategy for manufacturing bifunctional electrocatalysts-graphene nanosheets (GNS) coated with an ultrafine NiCo-MOF as nanocomposites (denoted NiCo-MOF@GNS) having a N-doped defect-rich and abundant cavity structure through one-pool treatment of metal-organic frameworks (MOFs). The precursors included N-doped dodecahedron-like graphene nanosheets (GNS), in which the NiCo-MOF was encompassed within the inner cavities of the GNS (NiCo-MOF@GNS) at the end or middle portion of the tubular furnace with several graphene layers. Volatile imidazolate N _x species were trapped by the NiCo-MOF nanosheets during the pyrolysis process, simultaneously inserting N atoms into the carbon matrix to achieve the defect-rich porous nanosheets and the abundantly porous cavity structure. With high durability, the as-prepared nanomaterials displayed simultaneously improved performance in the oxygen reduction reaction (ORR), the oxygen evolution reaction (OER), and photocatalysis. In particular, our material NiCo-MOF@GNS-700 exhibited excellent electrocatalytic activity, including a half-wave potential of 0.83 V (E _ORR, 1/2), a low operating voltage of 1.53 V (E _OER, 10) at 10 mA cm^-2, a potential difference (ΔE) of 1.02 V between E _OER, 10 and E _ORR, 1/2 in 0.1 M KOH, and a low band gap of 2.61 eV. This remarkable behavior was due to the structure of the defect-rich porous carbon nanosheets and the synergistic impact of the NPs in the NiCo-MOF, the N-doped carbon, and NiCo-N _x . Furthermore, the hollow structure enhanced the conductivity and stability. This useful archetypal template allows the construction of effective and stable bifunctional electrocatalysts, with potential for practical viability for energy conversion and storage.