Pt3Mn alloy nanostructure with high-index facets by Sn doping modified for highly catalytic active electro-oxidation reactions

Strain engineering of PtMn alloy enclosed by high-indexed facets boost ethanol electrooxidation

Surface strain engineering has proven to be an efficient strategy to enhance catalytic properties of platinum (Pt)-based catalysts for electrooxidation reactions. Herein, the S-doped PtMn concave cubes (CNCs) enclosed with high index facets (HIFs) and regulatable surface strain are successfully fabricated by two steps hydrothermal method. The S element with electrophilic property can modify the near-surface of PtMn nanocrystals, altering the electronic structure of Pt to effectively regulate the adsorption/desorption of intermediates in the ethanol electrooxidation reaction (EOR). The PtMnS1.1 catalyst with optimal surface strain delivered extraordinary catalytic performance on EOR in acidic media, with a specific activity of 2.88 mA/cm2 and mass activity of 1.10 mA/μgPt, which is 4.1 and 2.2 times larger than that of state-of-the-art Pt/C catalyst, respectively. Additionally, the PtMnS1.1 catalyst also achieve excellent catalytic properties in alkaline electrolyte for EOR. The results of kinetic studies indicated that the surface strain and modified electronic structure can degrade the activation energy barrier during the process of EOR, which is beneficial for enhance the reaction rate. This work provides a promising approach to construct highly efficient electrocatalysts with tunable surface strain effects for clean energy electro-chemical reactions.

Pt3Sn0.5Mn0.5 Intermetallic Electrocatalyst with Superior Stability for CO-Resilient Methanol Oxidation

The sluggish kinetics of methanol oxidation reaction (MOR) and poor long-term durability of catalysts are the main restrictions of the large-scale applications of direct methanol fuel cells (DMFCs). Herein, we demonstrated an inspirational ternary Pt3Sn0.5Mn0.5/DMC intermetallic catalyst that reached 4.78 mA cm-2 and 2.39 A mg-1Pt for methanol oxidation, which were 2.50/2.44 and 5.62/5.31 times that of commercial PtRu/C and Pt/C. After the durability test, Pt3Sn0.5Mn0.5/DMC presented a very low current density attenuation (38.5%), which was significantly lower than those for commercial PtRu/C catalyst (84.2%) and Pt/C (93.1%). Density functional theory (DFT) calculations revealed that the coregulation of Sn and Mn altered the surface electronic structure and endowed Pt3Sn0.5Mn0.5 with selective adsorption of Pt for CO and Sn for OH, which optimized the adsorption strength for intermediates and improved the reaction kinetics of MOR. Beyond offering an advanced electrocatalyst, this study provided a new point of view for the rational design of superior methanol oxidation catalysts for DMFC.

A high-performance Pt-based catalyst for the methanol oxidation reaction: effect of electrodeposition mode and cocatalyst on electrocatalytic activity

The influence of supporting material, cocatalyst, and electrodeposition mode on MOR activity.

PtCuFe alloy nanochains: Synthesis and composition-performance relationship in methanol oxidation and hydrogen evolution reactions

The controllable synthesis of 1-dimensional (1D) multi-metal Pt-based alloys, with enhanced electro-chemical properties remains a challenge, despite the wide application of Pt-based catalysts in fuel cells and in the hydrogen evolution reaction (HER). Herein, we fabricate PtCuFe alloy nanochains (NCs) that have a tunable composition by flexibly adjusting the molar ratios of the metal precursors. It was found that Cu²⁺ is key in the formation of 1D NCs, as confirmed by transmission electron microscopy characterizations. In addition, the alloyed Fe can further increase the content of the metallic state of Cu in the PtCuFe NCs. The as-prepared PtCuFe NCs exhibited higher catalytic activity and stability than those of the Pt nanoparticles (NPs), PtFe NPs, and PtCu NCs, for the methanol oxidation reaction (MOR) and HER. Additionally, the composition-performance relationship of PtCu_xFe_y NCs toward the MOR and HER were investigated. The hybrid density functional theory calculation and analysis showed that the 1D PtCuFe NCs have a lower lowest unoccupied molecular orbital (LUMO) than those of the 2- and 3-dimensional PtCuFe, verifying that the 1D PtCuFe NCs exhibit the highest activity for the MOR. This work has established a new method for the controllable synthesis of multi-metal Pt-based NCs/alloy catalysts and their subsequent applications in other electro-catalytic reactions.