Hierarchical porous bowl-like nitrogen-doped carbon supported bimetallic AuPd nanoparticles as nanoreactors for high efficient catalytic oxidation of HMF to FDCA

Innovative Air Cathode with Ni-Doped Cobalt Sulfide in Highly Ordered Macroporous Carbon Matrix for Rechargeable Zn-Air Battery

To realize the practical application of rechargeable Zn-Air batteries (ZABs), it is imperative to develop a non-noble metal-based electrocatalyst with high electrochemical performance for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). Herein, Ni-doped Co9S8 nanoparticles dispersed on an inverse opal-structured N, S co-doped carbon matrix (IO─NixCo9-xS8@NSC) as a bifunctional electrocatalyst is presented. The unique 3D porous structure, arranged in an inverse opal pattern, provides a large active surface area. Also, the conductive carbon substrate ensures the homogeneous dispersion of NixCo9-xS8 nanocrystals, preventing aggregation and increasing the exposure of active sites. The introduction of heteroatom dopants into the Co9S8 structure generates defect sites and enhances surface polarity, thereby improving electrocatalytic performance in alkaline solutions. Consequently, the IO─NixCo9-xS8@NSC shows excellent bifunctional activity with a high half-wave potential of 0.926 V for ORR and a low overpotential of 289 mV at 10 mA cm-2 for OER. Moreover, the rechargeable ZAB assembled with prepared electrocatalyst exhibits a higher specific capacity (768 mAh gZn -1), peak power density (180.2 mW cm-2), and outstanding stability (over 160 h) compared to precious metal-based electrocatalyst.

Electron Structure Tuned Oxygen Vacancy-Rich AuPd/CeO2 for Enhancing 5-Hydroxymethylfurfural Oxidation

The design of high activity catalyst for the efficiently conversion of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) gains great interest. The rationally tailoring of electronic structure directly affects the interaction between catalysts and organic substrates, especially molecular oxygen as the oxidant. This work, the bimetallic catalysts AuPd/CeO2 were prepared by the combining method of chemical reduction and photo-deposition, effectively concerting charge between Au and Pd and forming the electron-rich state of Au. The increasing of oxygen vacancy concentration of CeO2 by acidic treatment can facilitate the adsorption of HMF for catalysts and enhance the yield of FDCA (99.0 %). Moreover, a series of experiment results combining with density functional theory calculation illustrated that the oxidation performance of catalyst in HMF conversion was strongly related to the electronic state of interfacial Au-Pd-CeO2. Furthermore, the electron-rich state sites strengthen the adsorption and activation of molecular oxygen, greatly promoting the elimination of β-hydride for the selective oxidation of 5-hydroxymethyl-2-furancarboxylic acid (HMFCA) to FDCA, accompanied with an outgoing FDCA formation rate of 13.21 mmol ⋅ g-1 ⋅ min-1 at 80 °C. The perception exhibited in this research could be benefit to understanding the effects of electronic state for interfacial sites and designing excellent catalysts for the oxidation of HMF.

Leveraging Radiation-triggered Metal Prodrug Activation Through Nanosurface Energy Transfer for Directed Radio-chemo-immunotherapy

Metal-based drugs currently dominate the field of chemotherapeutic agents; however, achieving the controlled activation of metal prodrugs remains a substantial challenge. Here, we propose a universal strategy for the radiation-triggered activation of metal prodrugs via nanosurface energy transfer (NSET). The core-shell nanoplatform (Ru-GNC) is composed of gold nanoclusters (GNC) and ruthenium (Ru)-containing organic-inorganic hybrid coatings. Upon X-ray irradiation, chemotherapeutic Ru (II) complexes were released in a controlled manner through a unique NSET process involving the transfer of photoelectron energy from the radiation-excited Ru-GNCs to the Ru-containing hybrid layer. In contrast to the traditional radiation-triggered activation of prodrugs, such an NSET-based system ensures that the reactive species in the tumor microenvironment are present in sufficient quantity and are not easily quenched. Additionally, ultrasmall Ru-GNCs preferably target mitochondria and profoundly disrupt the respiratory chain upon irradiation, leading to radiosensitization by generating abundant reactive oxygen species. Consequently, Ru-GNC-directed radiochemotherapy induces immunogenic cell death, resulting in significant therapeutic outcomes when combined with the programmed cell death-ligand 1 (PD-L1) checkpoint blockade. This NSET strategy represents a breakthrough in designing radiation-triggered nanoplatforms for metal-prodrug-mediated cancer treatment in an efficient and controllable manner.

Enhancing Low-Potential Electrosynthesis of 2,5-Furandicarboxylic Acid on Monolithic CuO by Constructing Oxygen Vacancies

Electrosynthesis of 2,5-furandicarboxylic acid (FDCA) from the biomass-derived 5-hydroxymethylfurfural (HMF) is one of the most potential means to produce a bioplastic monomer. Copper oxide (CuO) catalyst shows promising prospects due to its high surface activity, conductivity, and stability, but relatively poor capability of oxygen evolution; however, the weak adsorption of substrates and the lack of facile synthetic strategies largely restrict its practical application. Here, a novel facile in situ method, alternate cycle voltammetry (denoted as c) and potentiostatic electrolysis (denoted as p), was proposed to prepare a monolithic cpc-CuO/Cu-foam electrocatalyst. Along with the increment of CuO and its surficial oxygen vacancies (OV), the FDCA yield, productivity, and Faradaic efficiency can reach up to ∼98.5%, ∼0.2 mmol/cm2, and ∼94.5% under low potential of 1.404 VRHE. Such an efficient electrosynthesis system can be easily scaled up to afford pure FDCA powders. In a combinatory analysis via electron paramagnetic resonance spectroscopy, H2 temperature-programmed reduction, open circuit potential, infrared spectroscopy, zeta potential, electrochemical measurement, and theoretical calculation, we found that the CuO was the active phase and OV generated on CuO surface can dramatically enhance the adsorption of *HMF and *OH (* denotes an active site), accounting for its superior FDCA production. This work offers an excellent paradigm for enhancing biomass valorization on CuO catalysts by constructing surficial defects.

Synergistic Interaction between Ruthenium Catalysts and Grafted Niobium on SBA-15 for 2,5-Furandicarboxylic Acid Production Using 5-Hydroxymethylfurfural

This study entailed the synthesis of Ru nanocatalyst decorated on Nb-grafted SBA-15. A Nb-grafted SBA-15 support with varying Nb contents was utilized as a support for the Ru nanoparticles. The effect of Nb grafting on the immobilized Ru nanoparticle catalyst was systematically investigated, and its catalytic performance in the synthesis of furandicarboxylic acid using 5-hydroxymethylfurfural under base-free reaction conditions was evaluated. The results indicate the increased productivity of the Ru@Nb-grafted SBA-15 catalyst with a yield exceeding 95%, representing a significant advancement in catalysis. This study also affords insights into the complex relationship between the catalytic activity and selectivity and its unique surface attributes. Moreover, acidic sites were created, and the electron density within the active sites was modulated by monomeric Nb oxide species on the SBA-15. Additionally, the role of high-electron-density Ru atoms in facilitating the efficient adsorption and activation of the reactant, resulting in enhanced catalytic efficacy, was highlighted.

Controllable evolution of NiOOH/Au3+ active species for the oxidation of 5-hydroxymethylfurfural

To induce the generation of active species at the metal-carrier interface, a new synthetic strategy was successfully developed to reconstruct the Ni MOF-Au via electrochemical activation. This unique configuration not only obtained high-valence NiOOH-Au3+ species, but also stably anchored the Au nanoparticles on the surface of the catalyst. As a result, nearly 99.8% FDCA yield and 100% Faraday efficiency of FDCA were achieved at the optimal potential of 1.57 V vs. RHE. Therefore, this electrochemical reconstruction provides new insights for the development of efficient catalysts in other heterogeneous catalytic reactions.

Oxygen Vacancy-Induced Metal-Support Interactions in AuPd/ZrO2 Catalysts for Boosting 5-Hydroxymethylfurfural Oxidation

The construction of strong metal-support interactions in oxide-supported noble metal nanocatalysts has been considered an emerging and efficient way in improving catalytic performance in biomass-upgrading reactions. Herein, a citric acid (CA)-assisted synthesized ZrO2 layer with improved oxygen vacancy (Ov) concentrations on a natural clay mineral of halloysite nanotubes (HNTs) was designed. Moreover, AuxPdy/ZrO2@HNTs-zCA catalysts were prepared by loading AuPd bimetal and employed for aerobic oxidation of the lignocellulosic biomass-derived 5-hydroxymethylfurfural (HMF) platform to the bioplastic monomer 2,5-furandicarboxylic acid (FDCA) with water as the solvent. The results of catalytic experiments revealed that the Au3Pd1/ZrO2@HNTs-1.0CA catalyst exhibited excellent catalytic activity at 0.5 MPa O2, with a satisfactory FDCA yield of 99.5% and outstanding FDCA formation rate of 1057.9 mmol·g-1·h-1. The improved Ov concentration in the ZrO2 support enhanced the adsorption and activation ability of the catalyst for O2, and a higher Lewis acid concentration provided a stronger adsorption ability of the catalyst for reaction substrates. Besides, the synergistic effect of AuPd bimetallic nanoparticles steered the tandem oxidation of aldehyde and alcohol groups in HMF and accelerated the rate-determining step. More importantly, the relationship between the Ov concentration and catalytic performance also demonstrated that the enhanced catalytic activity for HMF oxidation was mainly attributed to the active interface of AuPd-ZrOx. This work offers fresh insights into rationally designing oxygen vacancy-driven strong interactions between the oxide support and noble nanoparticles for the catalytic upgrade of biomass platform chemicals.

Mechanistic Studies into the Selective Production of 2,5-furandicarboxylic Acid from 2,5-bis(hydroxymethyl)furan Using Au-Pd Bimetallic Catalyst Supported on Nitrated Carbon Material

Aerobic oxidation of bio-sourced 2,5-bis(hydroxymethyl)furan (BHMF) to 2, 5-furandicarboxylic acid (FDCA), a renewable and green alternative to petroleum-derived terephthalic acid (TPA), is of great significance in green chemicals production. Herein, hierarchical porous bowl-like nitrogen-rich (nitrated) carbon-supported bimetallic Au-Pd nanocatalysts (AumPdn/ N-BNxC) with different nitrogen content and bimetal nanoparticle sizes were developed and employed for the highly efficient aerobic oxidation of BHMF to FDCA in sodium carbonate aqueous solution. The reaction pathway for catalytic oxidation of BHMF went through the steps of BHMF→HMF→HMFCA→FFCA→FDCA. Kinetics studies showed that the activation energies of BHMF, HMF, HMFCA, and FFCA were 58.1 kJ·moL−1, 39.1 kJ·moL−1, 129.2 kJ·moL−1, and 56.3 kJ·moL−1, respectively, indicating that the oxidation of intermediate HMFCA to FFCA was the rate-determining step. ESR tests proved that the active species was a superoxide radical. Owing to the synergy between the nitrogen-rich carbon support and bimetallic Au-Pd nanoparticles, the Au1Pd1/N-BN2C nanocatalysts exhibited BHMF conversion of 100% and FDCA yield of 95.8% under optimal reaction conditions. Furthermore, the nanocatalysts showed good stability and reusability. This work provides a versatile strategy for the design of heterogeneous catalysts for the highly efficient production of FDCA from BHMF.

Base-Free Aerobic Oxidation of Furfuralcohols and Furfurals to Furancarboxylic Acids over Nitrogen-Doped Carbon-Supported AuPd Bowl-Like Catalyst

Upgrading furfuralcohols and furfurals to furancarboxylic acids is of great significance for high value-added downstream chemicals synthesis and biomass conversion. Developing an efficient catalyst is the key to acquiring a completely sustainable process. Herein, nitrogen-doped carbon-supported bimetallic AuPd bowl-like catalysts were synthesized. The surface wettability of nitrogen-doped carbon was well adjusted by the nitrification process. Benefiting from the alloying effect of bimetallic AuPd catalyst and the formation of hydroxyl radical initiated by H₂ O dissociation on the hydrophilic surface of nitrated nitrogen-doped carbon, base-free aerobic oxidation of 5-hydroxymethylfurfural (HMF) could produce the highest 2,5-furandicarboxylic acid (FDCA) yield of 93.9 %. In-situ infrared spectroscopy uncovered adsorption configuration of HMF, and the nitrated carbon surface was favorable for HMF and intermediates to enter the active sites, greatly promoting the catalytic oxidation process. Employing other furfuralcohols (furfuryl alcohol, furan-2,5-diyldimethanol, 2,5-bishydroxymethylfuran) as well as furfural and 5-methylfurfural as starting materials, 35.6-95.4 % yield of furancarboxylic acids (FDCA, 2-furoic acid, 5-methyl-2-furoic acid) were also obtained. Moreover, the developed catalysts could maintain excellent stability and activity after four successive runs. This deep insight into the role of bimetallic synergy and surface wettability provides a basis for the rational design of the highly efficient catalysts for the oxidation of furfuralcohols and furfurals and related reactions.

Research Progress of Highly Efficient Noble Metal Catalysts for the Oxidation of 5-Hydroxymethylfurfural

5-hydroxymethylfurfural (HMF) is considered to be one of the most pivotal multifunctional biomass platform chemicals. This Review discusses recent advances in catalytic oxidation of HMF towards high-value products. The reaction mechanism of different noble metals and the path of HMF oxidation to high-value products have been deeply investigated in the noble metal catalytic system. The reaction mechanisms of different noble metals and HMF conversion paths were compared in detail. Moreover, the factors affecting the performance of different noble metal catalysts were summarized. Finally, effective strategies were put forward to improve the catalytic performance of noble metal catalysts. The purpose is to provide a valuable reference for the academic research on the preparation of oxidation products from biomass-based HMF and the industrial application of noble metal catalysts.

Catalytic Conversion of 5-Hydroxymethylfurfural to High-Value Derivatives by Selective Activation of C-O, C=O, and C=C Bonds

With increasing concern for reducing CO₂ emission and alleviating fossil resource dependence, catalytic transformation of 5-hydroxymethylfurfural (HMF), a vital platform compound derived from C₆ sugars, holds great promise for producing value-added chemicals. Among several well-established catalytic systems, hydrogenation and oxidation processes have been efficiently adopted for upgrading HMF. This Review covers recent advances in the development of thermocatalytic conversion of HMF into value-added chemicals. The advances of metal-catalyzed hydrogenation, hydrogenolysis, ring-opening, decarbonylation, and oxidation involving selective activation of C-O, C=O, and C=C groups are described. The roles played by nature of metals, supports, additives, synergy of metal-acid sites, and metal-support interaction are also discussed at the molecular level. Finally, an outlook is provided to highlight major challenges associated with this huge research area.

Enabling Efficient Aerobic 5-Hydroxymethylfurfural Oxidation to 2,5-Furandicarboxylic Acid in Water by Interfacial Engineering Reinforced Cu-Mn Oxides Hollow Nanofiber

Herein, a one-dimensional hollow nanofiber catalyst composed of tightly packed multiphase metal oxides of Mn₂ O₃ and Cu_1.4 Mn_1.6 O₄ was constructed by electrospinning and tailored thermal treatment procedure. The characterization results comprehensively confirmed the special morphology and composition of various comparative catalysts. This strategy endowed the catalyst with abundant interfacial characteristics of components Mn₂ O₃ and Cu_1.4 Mn_1.6 O₄ nanocrystal. Impressively, the tuning thermal treatment resulted in tailored Cu^I sites and surface oxygen species of the catalyst, thus affording optimized oxygen vacancies for reinforced oxygen adsorption, while the concomitant enhanced lattice oxygen activity in the constructed composite catalyst ensured the higher catalytic oxidation ability. More importantly, the regulated proportion of oxygen vacancy and lattice oxygen in the composite catalyst was obtained in the best catalyst, beneficial to accelerate the reaction cycle. Compared to other counterparts obtained by different temperatures, the CMO-500 sample exhibited superior selective aerobic 5-hydroxymethylfurfural (HMF) oxidation to 2,5-furandicarboxylic acid (FDCA, 96 % yield) in alkali-bearing aqueous solution using O₂ at 120 °C, which resulted from the above-mentioned composition optimization and interfacial engineering reinforced surface oxygen consumption and regeneration cycle. The reaction mechanism was further proposed to uncover the lattice oxygen and oxygen vacancy participating HMF conversion process.

Current Advances in the Sustainable Conversion of 5-Hydroxymethylfurfural into 2,5-Furandicarboxylic Acid

2,5-Furandicarboxylic acid (FDCA) is currently considered one of the most relevant bio-sourced building blocks, representing a fully sustainable competitor for terephthalic acid as well as the main component in green polymers such as poly(ethylene 2,5-furandicarboxylate) (PEF). The oxidation of biobased 5-hydroxymethylfurfural (HMF) represents the most straightforward approach to obtain FDCA, thus attracting the attention of both academia and industries, as testified by Avantium with the creation of a new plant expected to produce 5000 tons per year. Several approaches allow the oxidation of HMF to FDCA. Metal-mediated homogeneous and heterogeneous catalysis, metal-free catalysis, electrochemical approaches, light-mediated procedures, as well as biocatalytic processes share the target to achieve FDCA in high yield and mild conditions. This Review aims to give an up-to-date overview of the current developments in the main synthetic pathways to obtain FDCA from HMF, with a specific focus on process sustainability.

Crystal Faces-Tailored Oxygen Vacancy in Au/CeO2 Catalysts for Efficient Oxidation of HMF to FDCA

Developing an efficient catalyst to upgrade 5-hydroxymethylfurfural (HMF) to high-value-added downstream chemicals is of great significance in biomass conversion. Nanorod (110)-, nanocube (100)-, and nanooctaheron (111)-CeO₂ -supported Au nanoparticles were prepared to investigate the intrinsic effect of CeO₂ crystal faces on the oxidation of HMF to 2,5-furandicarboxylic acid (FDCA). The experimental results and density functional theory calculation revealed that the concentration of oxygen vacancy (V_O ) for exposed specific crystal faces was crucial to the oxygen adsorption ability, and Au/nanorod-CeO₂ with the highest V_O concentration promoted the formation of more oxygen active species (superoxide radical) on CeO₂ (110) crystal face than (100) and (111) crystal faces. Besides, the higher V_O concentration could provide a strong adsorption ability of HMF, greatly boosting the activation of HMF. Thus, these results led to a superior catalytic activity for HMF oxidation over Au/nanorod-CeO₂ (FDCA yield of 96.5 %). In-situ Fourier-transform (FT)IR spectroscopy uncovered the HMF oxidation pathway, and the possible catalytic mechanism was proposed. The deep insight into the role of regulation for crystal faces provides a basis for the rational design of highly active facets for the oxidation of HMF and related reactions.

Precipitation Polymerization: A Powerful Tool for Preparation of Uniform Polymer Particles

Precipitation polymerization (PP) is a powerful tool to prepare various types of uniform polymer particles owing to its outstanding advantages of easy operation and the absence of any surfactant. Several PP approaches have been developed up to now, including traditional thermo-induced precipitation polymerization (TRPP), distillation precipitation polymerization (DPP), reflux precipitation polymerization (RPP), photoinduced precipitation polymerization (PPP), solvothermal precipitation polymerization (SPP), controlled/‘‘living’’ radical precipitation polymerization (CRPP) and self-stabilized precipitation polymerization (2SPP). In this review, a general introduction to the categories, mechanisms, and applications of precipitation polymerization and the recent developments are presented, proving that PP has great potential to become one of the most attractive polymerization techniques in materials science and bio-medical areas.

Production of Hydroxymethylfurfural Derivatives From Furfural Derivatives via Hydroxymethylation

Hydroxymethylfurfural (HMF) derivatives such as 2,5-bis(hydroxymethyl)furan (BHMF) and furandicarboxylic acid (FDCA) are promising alternative of fossil-based diols and dicarboxylic acids for synthesis of polyesters such as polyethylene terephthalate (PET). However, high cost for preparing HMF from biomass discourages the commercialization of HMF-derived polyesters. Since producing furfural (FUR) from five-carbon sugars (e.g., xylose) via dehydration is an inexpensive and commercialized process, we herein reported a method to synthesize BHMF derivatives (5-(ethoxymethyl)furan-2-methanol (EMFM), 2,5-bis(hydroxymethyl)furan monoacetate (BHMFM) and 2,5-bis(hydroxymethyl)furan diacetate (BHMFD) from furfural derivatives, i.e., (2-(ethoxymethyl)furan (EMF) and furfuryl acetate (FA)). To avoid strong acid-induced side reactions (e.g., furan ring opening, condensation and carbonization), two reaction systems, i.e., a low-concentration HCl aqueous solution combined with formaldehyde and anhydrous acetic acid combined with paraformaldehyde, were found to be suitable for such a hydroxymethylation reaction and could lead to decent product yields. In order to improve the carbon utilization, condensed furanic byproducts were further converted into hydrocarbon fuels via a reported two-step hydrodeoxygenation (HDO) process. This study not only validates the possibility of synthesizing functional HMF derivatives (EMFM, BHMFM, and BHMFD) from commercially-available FUR derivatives (EMF and FA), but also provide a new way to transform condensed furanics to value-added hydrocarbon fuels.

Sulfur Vacancy and Ti3 C2 Tx Cocatalyst Synergistically Boosting Interfacial Charge Transfer in 2D/2D Ti3 C2 Tx /ZnIn2 S4 Heterostructure for Enhanced Photocatalytic Hydrogen Evolution

Constructing an efficient photoelectron transfer channel to promote the charge carrier separation is a great challenge for enhancing photocatalytic hydrogen evolution from water. In this work, an ultrathin 2D/2D Ti3 C2 Tx /ZnIn2 S4 heterostructure is rationally designed by coupling the ultrathin ZnIn2 S4 with few-layered Ti3 C2 Tx via the electrostatic self-assembly strategy. The 2D/2D Ti3 C2 Tx /ZnIn2 S4 heterostructure possesses larger contact area and strong electronic interaction to promote the charge carrier transfer at the interface, and the sulfur vacancy on the ZnIn2 S4 acting as the electron trap further enhances the separation of the photoinduced electrons and holes. As a consequence, the optimal 2D/2D Ti3 C2 Tx /ZnIn2 S4 composite exhibits a high photocatalytic hydrogen evolution rate of 148.4 µmol h-1 , which is 3.6 times and 9.2 times higher than that of ZnIn2 S4 nanosheet and flower-like ZnIn2 S4 , respectively. Moreover, the stability of the ZnIn2 S4 is significantly improved after coupling with the few-layered Ti3 C2 Tx . The characterizations and density functional theory calculation demonstrate that the synergistic effect of the sulfur vacancy and Ti3 C2 Tx cocatalyst can greatly promote the electrons transfer from ZnIn2 S4 to Ti3 C2 Tx and the separation of photogenerated charge carriers, thus enhancing the photocatalytic hydrogen evolution from water.

Coupling Natural Halloysite Nanotubes and Bimetallic Pt-Au Alloy Nanoparticles for Highly Efficient and Selective Oxidation of 5-Hydroxymethylfurfural to 2,5-Furandicarboxylic Acid

The aerobic oxidation of 5-hydroxymethylfurfural (HMF), a key platform compound derived from biomass, to 2,5-furandicarboxylic acid (FDCA) is a highly important reaction in the production of green and sustainable chemicals. Here, we developed a highly efficient and stable halloysite-supported Pt-Au alloy catalyst for the selective oxidation of HMF to FDCA. The catalyst was synthesized through the organosilane functionalization of halloysite nanotubes, followed by the in situ formation and dispersion of Pt-Au alloy nanoparticles on the internal and external surfaces of nanotubes. The composition, morphology, and structure of the prepared catalyst were characterized. The catalyst with the optimal composition of Pt/Au molar ratio of 1/4 and metal loading of 1.5 wt % exhibited outstanding catalytic activity for the oxidation of HMF to FDCA using O₂ as an oxidant with 100% conversion of HMF and 99% selectivity of FDCA. This excellent catalytic performance is mainly attributed to the high dispersion and alloying effects of bimetallic nanoparticles, which promoted the activation of reactants or intermediates and further improved FDCA selectivity. Furthermore, the halloysite-supported Pt/Au bimetallic catalyst showed high stability and reusability. This study provides a promising strategy by combining clay mineral halloysite and bimetallic alloys for developing efficient catalysts with high FDCA selectivity and stability for the oxidation of HMF to FDCA.

Highly efficient catalytic oxidation of 5-hydroxymethylfurfural to 2,5-furandicarboxylic acid using bimetallic Pt-Cu alloy nanoparticles as catalysts

Bimetallic platinum-copper alloy nanoparticles are highly active catalysts for the oxidation of 5-hydroxymethylfurfural (HMF) to 2,5-furandicarboxylic acid (FDCA) under base-free conditions, with a high turnover frequency of up to 135 h^-1 in aqueous solution. The Pt-Cu_1.5/AC alloyed catalyst promoted the rate-determining step in the tandem oxidation compared with the monometallic Pt/AC catalyst, thus improving the catalytic performance.

Atomically Dispersed Co Clusters Anchored on N-doped Carbon Nanotubes for Efficient Dehydrogenation of Alcohols and Subsequent Conversion to Carboxylic Acids

The catalytic dehydrogenation of readily available alcohols to high value-added carbonyl compounds is a research hotspot with scientific significance. Most of the current research about this reaction is performed with noble metal-based homogeneous catalysts of high price and poor reusability. Herein, highly dispersed Co-cluster-decorated N-doped carbon nanotubes (Co/N-CNTs) were fabricated via a facile strategy and used for the dehydrogenation of alcohols with high efficiency. Various characterization techniques confirmed the presence of metallic Co clusters with almost atomic dispersion, and the N-doped carbon supports also enhanced the catalytic activity of Co clusters in the dehydrogenation reaction. Aldehydes as dehydrogenation products were further transformed in situ to carboxylic acids through a Cannizzaro-type pathway under alkaline conditions. The reaction pathway of the dehydrogenation of alcohols was clearly confirmed by theoretical calculations. This work should provide an effective and simple approach for the accurate design and synthesis of small Co-clusters catalysts for the efficient dehydrogenation-based transformation of alcohols to carboxylic acids under mild reaction conditions.