Methane coupling and hydrogen evolution induced by palladium-loaded gallium oxide photocatalysts in the presence of water vapor

Photoelectrochemical Conversion of Methane to Ethane and Hydrogen under Visible Light Using Functionalized Tungsten Trioxide Photoanodes with Proton Exchange Membrane

Developing methane utilization technologies is desired to convert abundant and renewable carbon resources, such as natural gas and biogas, into value-added chemical products. This study provides insights into emerging photoelectrochemical (PEC) technology for the photocatalytic transformation of methane to C2H6 and H2 using visible light at room temperature. The PEC conversion of methane to oxygenates has been investigated in aqueous electrolytes. Herein, we demonstrate the gas-phase PEC methane conversion using a proton exchange membrane (PEM) as a solid polymer electrolyte and a gas-diffusion photoanode for methane oxidation. Tungsten trioxide (WO3), a semiconductor photocatalyst responsive to visible light, is utilized as the photoanode material. Ultraviolet light (∼365 nm) excitation predominantly results in CO2 production with lower C2H6 selectivity in humidified methane. In contrast, visible light (∼453 nm) effectively promotes C2H6 production over the WO3 photoanode, attributed to preferential hydroxyl radical (•OH) formation compared to UV irradiation. Photogenerated holes formed near the valence band maximum of WO3 contribute to •OH formation through a single-electron water oxidation. The photogenerated •OH activates gaseous methane molecules to methyl radicals, subsequently coupled into C2H6 at the gas-electrolyte-semiconductor boundary. H2 is concurrently formed on the cathode electrocatalyst. Improving the selectivity for the dehydrogenative coupling of methane is pivotal for enhancing the energy efficiency in the PEM-PEC system.

Pd3Bi intermetallic particles prepared by the photodeposition method for photocatalytic ethane production from methane

A Pd3Bi intermetallic compound (IMC) was photocatalytically deposited onto the gallium oxide (Ga2O3) surface at room temperature. Conventional impregnation and reduction methods were difficult for the formation of the Pd3Bi IMC on Ga2O3, highlighting the importance of the photodeposition approach. The Pd3Bi-loaded Ga2O3 photocatalyst exhibited 84% selectivity in methane-to-ethane conversion with hydrogen production in the presence of water vapour.

Engineering surface lattice hydroxyl groups toward highly efficient photocatalytic methane coupling

Nb3O7(OH) containing abundant surface lattice hydroxyl groups, combining with loaded Au nanoparticles as the cocatalyst, was employed as a photocatalyst enabling highly efficient photocatalytic CH4 coupling to C2H6 under mild conditions. In situ spectroscopy technique revealed that the surface lattice hydroxyl groups play a vital role in promoting the activation of CH4 to produce the methoxy intermediates, contributing to significantly enhanced catalytic performance for CH4 conversion.

Photocatalytic Oxidative Coupling of Methane over Au1 Ag Single-Atom Alloy Modified ZnO with Oxygen and Water Vapor: Synergy of Gold and Silver

C-H dissociation and C-C coupling are two key steps in converting CH4 into multi-carbon compounds. Here we report a synergy of Au and Ag to greatly promote C2 H6 formation over Au1 Ag single-atom alloy nanoparticles (Au1 Ag NPs)-modified ZnO catalyst via photocatalytic oxidative coupling of methane (POCM) with O2 and H2 O. Atomically dispersed Au in Au1 Ag NPs effectively promotes the dissociation of O2 and H2 O into *OOH, promoting C-H activation of CH4 on the photogenerated O- to form *CH3 . Electron-deficient Au single atoms, as hopping ladders, also facilitate the migration of electron donor *CH3 from ZnO to Au1 Ag NPs. Finally, *CH3 coupling can readily occur on Ag atoms of Au1 Ag NPs. An excellent C2 H6 yield of 14.0 mmol g-1  h-1 with a selectivity of 79 % and an apparent quantum yield of 14.6 % at 350 nm is obtained via POCM with O2 and H2 O, which is at least two times that of the photocatalytic system. The bimetallic synergistic strategy offers guidance for future catalyst design for POCM with O2 and H2 O.

PdCu nanoalloy decorated photocatalysts for efficient and selective oxidative coupling of methane in flow reactors

Methane activation by photocatalysis is one of the promising sustainable technologies for chemical synthesis. However, the current efficiency and stability of the process are moderate. Herein, a PdCu nanoalloy (~2.3 nm) was decorated on TiO2, which works for the efficient, stable, and selective photocatalytic oxidative coupling of methane at room temperature. A high methane conversion rate of 2480 μmol g-1 h-1 to C2 with an apparent quantum efficiency of ~8.4% has been achieved. More importantly, the photocatalyst exhibits the turnover frequency and turnover number of 116 h-1 and 12,642 with respect to PdCu, representing a record among all the photocatalytic processes (λ > 300 nm) operated at room temperature, together with a long stability of over 112 hours. The nanoalloy works as a hole acceptor, in which Pd softens and weakens C-H bond in methane and Cu decreases the adsorption energy of C2 products, leading to the high efficiency and long-time stability.

Photocatalytic Oxidative Coupling of Methane to Ethane Using Water and Oxygen on Ag3PO4-ZnO

Photocatalytic oxidative coupling is an effective way of converting CH4 to high-value-added multi-carbon chemicals under mild conditions, where the breaking of the C-H bond is the main rate-limiting step. In this paper, the Ag3PO4-ZnO heterostructure photocatalyst was synthesized for photocatalytic oxidative coupling of methane (OCM) to C2H6. In addition, an excellent C2H6 yield (16.62 mmol g-1 h-1) and a remarkable apparent quantum yield (15.8% at 350 nm) at 49:1 CH4/Air and 20% RH are obtained, which is more than three times that of the state-of-the-art photocatalytic systems. Ag3PO4 improves the adsorption and dissociation ability of O2 and H2O, benefiting the formation of surface hydroxyl species. As a result, the C-H bond activation energy of CH4 on ZnO was obviously reduced. Meanwhile, the improved separation of photogenerated carriers on the Ag3PO4-ZnO heterostructure also accelerates the OCM process. Moreover, Ag nanoparticles (NPs) derived from Ag3PO4 reduction by photoelectrons promote the coupling of *CH3, which can inhibit the overoxidation of CH4 and increase C2H6 selectivity. This research provides a guide for the design of catalyst and reaction systems in the photocatalytic OCM process.

Direct Photocatalytic Synthesis of Acetic Acid from Methane and CO at Ambient Temperature Using Water as Oxidant

Direct functionalization of methane selectively to value-added chemicals is still one of the main challenges in modern science. Acetic acid is an important industrial chemical produced nowadays by expensive and environmentally unfriendly carbonylation of methanol using homogeneous catalysts. Here, we report a new photocatalytic reaction route to synthesize acetic acid from CH₄ and CO at room temperature using water as the sole external oxygen source. The optimized photocatalyst consists of a TiO₂ support and ammonium phosphotungstic polyoxometalate (NPW) clusters anchored with isolated Pt single atoms (Pt₁). It enables a stable synthesis of 5.7 mmol·L^-1 acetic acid solution in 60 h with the selectivity over 90% and 66% to acetic acid on liquid-phase and carbon basis, respectively, with the production of 99 mol of acetic acid per mol of Pt. Combined isotopic and in situ spectroscopy investigation suggests that synthesis of acetic acid proceeds via a photocatalytic oxidative carbonylation of methane over the Pt₁ sites, with the methane activation facilitated by water-derived hydroxyl radicals.

Synergy of Pd atoms and oxygen vacancies on In2O3 for methane conversion under visible light

Methane (CH4) oxidation to high value chemicals under mild conditions through photocatalysis is a sustainable and appealing pathway, nevertheless confronting the critical issues regarding both conversion and selectivity. Herein, under visible irradiation (420 nm), the synergy of palladium (Pd) atom cocatalyst and oxygen vacancies (OVs) on In2O3 nanorods enables superior photocatalytic CH4 activation by O2. The optimized catalyst reaches ca. 100 μmol h-1 of C1 oxygenates, with a selectivity of primary products (CH3OH and CH3OOH) up to 82.5%. Mechanism investigation elucidates that such superior photocatalysis is induced by the dedicated function of Pd single atoms and oxygen vacancies on boosting hole and electron transfer, respectively. O2 is proven to be the only oxygen source for CH3OH production, while H2O acts as the promoter for efficient CH4 activation through ·OH production and facilitates product desorption as indicated by DFT modeling. This work thus provides new understandings on simultaneous regulation of both activity and selectivity by the synergy of single atom cocatalysts and oxygen vacancies.

Nonoxidative coupling of ethane with gold loaded photocatalysts

Direct and continuous conversion of ethane to yield n-butane and hydrogen at near room temperature (ca. 320 K) was examined with gold loaded gallium oxide and titanium dioxide photocatalysts without the aid of any oxidant in a flow reactor.

Binary Au-Cu Reaction Sites Decorated ZnO for Selective Methane Oxidation to C1 Oxygenates with Nearly 100% Selectivity at Room Temperature

Direct and efficient oxidation of methane to methanol and the related liquid oxygenates provides a promising pathway for sustainable chemical industry, while still remaining an ongoing challenge owing to the dilemma between methane activation and overoxidation. Here, ZnO with highly dispersed dual Au and Cu species as cocatalysts enables efficient and selective photocatalytic conversion of methane to methanol and one-carbon (C1) oxygenates using O₂ as the oxidant operated at ambient temperature. The optimized AuCu-ZnO photocatalyst achieves up to 11225 μmol·g^-1·h^-1 of primary products (CH₃OH and CH₃OOH) and HCHO with a nearly 100% selectivity, resulting in a 14.1% apparent quantum yield at 365 nm, much higher than the previous best photocatalysts reported for methane conversion to oxygenates. In situ EPR and XPS disclose that Cu species serve as photoinduced electron mediators to promote O₂ activation to ^•OOH, and simultaneously that Au is an efficient hole acceptor to enhance H₂O oxidation to ^•OH, thus synergistically promoting charge separation and methane transformation. This work highlights the significances of co-modification with suitable dual cocatalysts on simultaneous regulation of activity and selectivity.

Light-Induced Nonoxidative Coupling of Methane Using Stable Solid Solutions

Achieving efficient and direct conversion of methane under mild conditions is of great significance for innovations in the chemical industry. However, the efficiency and lifetime of most catalysts remain too far from practical requirements, since it is difficult to break the first C-H bond of methane as well as to suppress the following complete dehydrogenation (or overoxidation) and the resulting carbonaceous deposition (or CO₂ ). Here, we report that wurtzite GaN:ZnO solid solutions exhibit unique and unprecedented photocatalytic performances for the nonoxidative coupling of methane at room temperature, exclusively generating ethane with nearly stoichiometric H₂ . High conversion rate (>330 μmol g^-1  h^-1 ), long-term stability (>70 h), and superior coke-resistance were achieved. At 293 K, the methane conversion exceeds 7 %, comparable to the equilibrium conversion of thermal catalysis at 910 K. Mechanistic studies revealed that the N-Zn_Ga -O_N units and the absence of acid sites on the surface played crucial roles in reactivity and coke resistance, respectively.