Effect of a calcium deblooming algorithm on accuracy of coronary computed tomography angiography

Spatial and temporal motion characterization for x-ray CT

BACKGROUND

Motion induced image artifacts have been the focus of many investigations for x-ray computed tomography (CT). Methodologies of combating patient motion include the use of gating devices to optimize the data acquisition, reduction in patient scan time via faster gantry rotation and large detector coverage, and the development of advanced reconstruction and post-processing algorithms to minimize motion artifacts.

PURPOSE

Previously proposed approaches are generally "global" in nature in that motion is characterized for the entire image. It is well known, however, that the presence of motion artifact in a CT image is highly nonuniform. When there is a lack of automated and quantitative local measure indicating the presence and the severity of motion artifacts in a local region, the quality of the reconstructed images depends heavily on the CT operator's rigor and experience. Even when an operator is informed of the presence of motion, little information is provided about the nature of the motion artifact to understand its relevance to the clinical task at hand. In this paper, we propose an image-space spatial- and temporal-consistency metric (CM) to detect and characterize the local motion.

METHOD

In a non-rigid human organ, such as the lung, there are many small and rigid objects (target objects), such as blood vessels and nodules, distributed throughout the organ. If motion can be characterized for these target objects, we obtain a complete motion map for the organ. To accomplish this, a preliminary image reconstruction is carried out to identify the target objects and establish region-of-interests for consistency-metric calculation. The CM is then obtained based on the backprojected intensity difference between the object region and its circular background. For a stationary object, the accumulation of this quantity over views is linear. When a target object moves, nonlinear behavior exhibits and a quantitative measure of linearity indicates the severity of motion.

RESULTS

Extensive computer simulation was utilized to confirm the validity of the theory. These tests stress the sensitivity of the proposed CM to the target object size, object shape, in-plane motion, cross-plane motion, cone-beam effect, and complex background. Results confirm that the proposed approach is robust under different testing conditions. The proposed CM is further validated using a cardiac scan of a swine, and the proposed CM correlates well with the visual inspection of the artifact in the reconstructed images.

CONCLUSIONS

In this paper, we have demonstrated the efficacy of the proposed CM for motion detection. Unlike previously proposed approaches where the consistency condition is derived for the entire image or the entire imaging volume, the proposed metric is well localized so that different zones in a patient anatomy can be individually characterized. In addition, the proposed CM provides a quantitative measure on a view-by-view basis so that the severity of motion is consistently estimated over time. Such information can be used to optimize the image reconstruction process and minimize the motion artifact.

Diagnostic performance of deep learning-based vessel extraction and stenosis detection on coronary computed tomography angiography for coronary artery disease: a multi-reader multi-case study

BACKGROUND

Post-processing and interpretation of coronary CT angiography (CCTA) imaging are time-consuming and dependent on the reader's experience. An automated deep learning (DL)-based imaging reconstruction and diagnosis system was developed to improve diagnostic accuracy and efficiency.

METHODS

Our study including 374 cases from five sites, inviting 12 radiologists, assessed the DL-based system in diagnosing obstructive coronary disease with regard to diagnostic performance, imaging post-processing and reporting time of radiologists, with invasive coronary angiography as a standard reference. The diagnostic performance of DL system and DL-assisted human readers was compared with the traditional method of human readers without DL system.

RESULTS

Comparing the diagnostic performance of human readers without DL system versus with DL system, the AUC was improved from 0.81 to 0.82 (p < 0.05) at patient level and from 0.79 to 0.81 (p < 0.05) at vessel level. An increase in AUC was observed in inexperienced radiologists (p < 0.05), but was absent in experienced radiologists. Regarding diagnostic efficiency, comparing the DL system versus human reader, the average post-processing and reporting time was decreased from 798.60 s to 189.12 s (p < 0.05). The sensitivity and specificity of using DL system alone were 93.55% and 59.57% at patient level and 83.23% and 79.97% at vessel level, respectively.

CONCLUSIONS

With the DL system serving as a concurrent reader, the overall post-processing and reading time was substantially reduced. The diagnostic accuracy of human readers, especially for inexperienced readers, was improved. DL-assisted human reader had the potential of being the reading mode of choice in clinical routine.

Photon-Counting Computed Tomography (PCCT): Technical Background and Cardio-Vascular Applications

Photon-counting computed tomography (PCCT) is a new advanced imaging technique that is going to transform the standard clinical use of computed tomography (CT) imaging. Photon-counting detectors resolve the number of photons and the incident X-ray energy spectrum into multiple energy bins. Compared with conventional CT technology, PCCT offers the advantages of improved spatial and contrast resolution, reduction of image noise and artifacts, reduced radiation exposure, and multi-energy/multi-parametric imaging based on the atomic properties of tissues, with the consequent possibility to use different contrast agents and improve quantitative imaging. This narrative review first briefly describes the technical principles and the benefits of photon-counting CT and then provides a synthetic outline of the current literature on its use for vascular imaging.

Cardiac CT blooming artifacts: clinical significance, root causes and potential solutions

This review paper aims to summarize cardiac CT blooming artifacts, how they present clinically and what their root causes and potential solutions are. A literature survey was performed covering any publications with a specific interest in calcium blooming and stent blooming in cardiac CT. The claims from literature are compared and interpreted, aiming at narrowing down the root causes and most promising solutions for blooming artifacts. More than 30 journal publications were identified with specific relevance to blooming artifacts. The main reported causes of blooming artifacts are the partial volume effect, motion artifacts and beam hardening. The proposed solutions are classified as high-resolution CT hardware, high-resolution CT reconstruction, subtraction techniques and post-processing techniques, with a special emphasis on deep learning (DL) techniques. The partial volume effect is the leading cause of blooming artifacts. The partial volume effect can be minimized by increasing the CT spatial resolution through higher-resolution CT hardware or advanced high-resolution CT reconstruction. In addition, DL techniques have shown great promise to correct for blooming artifacts. A combination of these techniques could avoid repeat scans for subtraction techniques.

Clinical utility of coronary artery computed tomography angiography- What we know and What's new?

Coronary computed tomography (CT) angiography (CCTA) is increasingly recognized for diagnosing obstructive coronary artery disease (CAD) among patients presenting with chest pain. In this review, we summarize the utility of CCTA to determine luminal stenosis and identifying coronary plaques with high-risk features. We review different scoring systems that can quantify total plaque burden including how artificial intelligence can facilitate more detailed plaque assessment. We discuss how CCTA can also be used to detect the hemodynamic significance of CAD lesions (fractional flow reserve CT and CT perfusion) and also local factors outside the vessel wall that may predispose to plaque rupture (fat attenuation index and wall shear stress). We conclude with technological advances in imaging acquisition using photon counting CT and post-image processing techniques especially those that can mitigate blooming artifacts.

Artificial Intelligence (Enhanced Super-Resolution Generative Adversarial Network) for Calcium Deblooming in Coronary Computed Tomography Angiography: A Feasibility Study

Background: The presence of heavy calcification in the coronary artery always presents a challenge for coronary computed tomography angiography (CCTA) in assessing the degree of coronary stenosis due to blooming artifacts associated with calcified plaques. Our study purpose was to use an advanced artificial intelligence (enhanced super-resolution generative adversarial network [ESRGAN]) model to suppress the blooming artifact in CCTA and determine its effect on improving the diagnostic performance of CCTA in calcified plaques. Methods: A total of 184 calcified plaques from 50 patients who underwent both CCTA and invasive coronary angiography (ICA) were analysed with measurements of coronary lumen on the original CCTA, and three sets of ESRGAN-processed images including ESRGAN-high-resolution (ESRGAN-HR), ESRGAN-average and ESRGAN-median with ICA as the reference method for determining sensitivity, specificity, positive predictive value (PPV) and negative predictive value (NPV). Results: ESRGAN-processed images improved the specificity and PPV at all three coronary arteries (LAD-left anterior descending, LCx-left circumflex and RCA-right coronary artery) compared to original CCTA with ESRGAN-median resulting in the highest values being 41.0% (95% confidence interval [CI]: 30%, 52.7%) and 26.9% (95% CI: 22.9%, 31.4%) at LAD; 41.7% (95% CI: 22.1%, 63.4%) and 36.4% (95% CI: 28.9%, 44.5%) at LCx; 55% (95% CI: 38.5%, 70.7%) and 47.1% (95% CI: 38.7%, 55.6%) at RCA; while corresponding values for original CCTA were 21.8% (95% CI: 13.2%, 32.6%) and 22.8% (95% CI: 20.8%, 24.9%); 12.5% (95% CI: 2.6%, 32.4%) and 27.6% (95% CI: 24.7%, 30.7%); 17.5% (95% CI: 7.3%, 32.8%) and 32.7% (95% CI: 29.6%, 35.9%) at LAD, LCx and RCA, respectively. There was no significant effect on sensitivity and NPV between the original CCTA and ESRGAN-processed images at all three coronary arteries. The area under the receiver operating characteristic curve was the highest with ESRGAN-median images at the RCA level with values being 0.76 (95% CI: 0.64, 0.89), 0.81 (95% CI: 0.69, 0.93), 0.82 (95% CI: 0.71, 0.94) and 0.86 (95% CI: 0.76, 0.96) corresponding to original CCTA and ESRGAN-HR, average and median images, respectively. Conclusions: This feasibility study shows the potential value of ESRGAN-processed images in improving the diagnostic value of CCTA for patients with calcified plaques.

3D-Printed Coronary Plaques to Simulate High Calcification in the Coronary Arteries for Investigation of Blooming Artifacts

The diagnostic value of coronary computed tomography angiography (CCTA) is significantly affected by high calcification in the coronary arteries owing to blooming artifacts limiting its accuracy in assessing the calcified plaques. This study aimed to simulate highly calcified plaques in 3D-printed coronary models. A combination of silicone + 32.8% calcium carbonate was found to produce 800 HU, representing extensive calcification. Six patient-specific coronary artery models were printed using the photosensitive polyurethane resin and a total of 22 calcified plaques with diameters ranging from 1 to 4 mm were inserted into different segments of these 3D-printed coronary models. The coronary models were scanned on a 192-slice CT scanner with 70 kV, pitch of 1.4, and slice thickness of 1 mm. Plaque attenuation was measured between 1100 and 1400 HU. Both maximum-intensity projection (MIP) and volume rendering (VR) images (wide and narrow window widths) were generated for measuring the diameters of these calcified plaques. An overestimation of plaque diameters was noticed on both MIP and VR images, with measurements on the MIP images close to those of the actual plaque sizes (<10% deviation), and a large measurement discrepancy observed on the VR images (up to 50% overestimation). This study proves the feasibility of simulating extensive calcification in coronary arteries using a 3D printing technique to develop calcified plaques and generate 3D-printed coronary models.