Analysis of malachite green in aquatic products by carbon nanotube-based molecularly imprinted – matrix solid phase dispersion

A vortex-assisted MSPD method for the extraction of Polycyclic Aromatic Hydrocarbons from shrimp with determination by GC-MS/MS

Polycyclic Aromatic Hydrocarbons (PAHs) are organic compounds with two or more condensed aromatic rings, formed from incomplete organic matter combustion. PAHs pose potential health risks due to their carcinogenic and mutagenic properties, accumulating in edible tissues of aquatic organisms, such as shrimp, which is extensively produced in the southern region of Rio Grande do Sul state (Brazil) and it is the most consumed seafood globally. Therefore, this study aimed to optimize and validate an analytical method for extracting 16 priority PAHs from shrimp samples using Vortex-Assisted Matrix Solid-Phase Dispersion (VA-MSPD) with determination by Gas Chromatography Tandem Mass Spectrometry (GC-MS/MS). The optimized method, which uses a reused solid support, was validated according to INMETRO and SANTE guidelines. PAHs demonstrated adequate linearity with correlation coefficients > 0.99. The matrix effect was assessed, and 12 out of the 16 PAHs showed a matrix effect of less than ±20%. The method's quantification limits ranged from 6.67 to 33.35 ng g-1. Accuracy and precision showed recovery values ranging from 55 to 115% with relative standard deviation (RSD) lower than 17% for all PAHs. In the applicability, 11 PAHs were detected, such as benzo[a]pyrene and benzo[b]fluoranthene, and the ∑PAHs ranged from 25.14 to 79.52 ng g-1, confirming the environmental contamination in the region and the need for monitoring these contaminants in shrimp destined for human consumption.

Challenges and effective tracking down strategies of antibiotic contamination in aquatic ecosystem

A growing environmental concern revolves around the widespread use of medicines, particularly antibiotics, which adversely impact water quality and various life forms. The unregulated production and utilization of antibiotics not only affect non-targeted organisms but also exert significant evolutionary pressures, leading to the rapid development of antimicrobial resistance (AMR) in bacterial communities. To address this issue, global studies have been conducted to assess the prevalence and quantities of antibiotics in various environmental components including freshwater, ocean, local sewage, and fish. These studies aim to establish effective analytical methods for identifying and measuring antibiotic residues in environmental matrices that might enable authorities to establish norms for the containment and disposal of antibiotics. This article offers a comprehensive overview of methods used to extract antibiotics from environmental matrices exploring purification techniques such as liquid-liquid extraction, solid-phase extraction, green extraction techniques, and concentration methods like lyophilization and rotary evaporation. It further highlights qualitative and quantitative analysis methods, high-performance liquid chromatography, ultra-high-performance liquid chromatography, and liquid chromatography-tandem along with analytical methods such as UV-Vis and tandem mass spectrometry for detecting and measuring antibiotics. Urgency is underscored for proactive strategies to curb antibiotic contamination, safeguarding the integrity of aquatic ecosystems and public health on a global scale.

Rapid Measurement of Residual Kanamycin Using Highly Specific Biomimetic Recognition Paper-Based Chip

The development of highly specific biomimetic recognition material is a challenge for rapid detection of harmful residues in foodstuff. In this study, a paper-based boronate affinity metal-organic framework/molecularly imprinted polymer microfluidic chip (FZS-BA@MIP) was constructed based on the in situ construction strategy, which was also designed as a highly specific biomimetic recognition module. Here, the homogeneous zeolitic imidazole framework-8 (ZIF-8) membrane served as a great scaffold and enrichment layer. Besides, the recognition layer of MIP was prepared based on a highly oriented boronate affinity surface imprinting strategy. With the aid of the liquid flow channel, the highly specific enrichment and visual detection for antibiotic residues like kanamycin in actual products were achieved on the paper chip module of an integrated lateral flow platform. The whole analysis process could be accomplished within 30 min. In brief, this study offered a new integrated biomimetic recognition platform for visually detecting harmful veterinary residues containing cis-diols, which demonstrated promising commercial value in point-of-care testing of foodborne hazardous compounds.

Determination of Antibiotic Residues in Aquaculture Products by Liquid Chromatography Tandem Mass Spectrometry: Recent Trends and Developments from 2010 to 2020

The issue of antibiotic residues in aquaculture products has aroused much concern over the last decade. The residues can remain in food and enter the human body through the food chain, posing great risks to public health. For the safety of foods and products, many countries have issued maximum residue limits and banned lists for antibiotics in aquaculture products. Liquid chromatography tandem mass spectrometry (LC/MS/MS) has been widely used for the determination of trace antibiotic residues due to its high sensitivity, selectivity and throughput. However, considering its matrix effects during quantitative measurements, it has high requirements for sample pre-treatment, instrument parameters and quantitative method. This review summarized the application of LC/MS/MS in the detection of antibiotic residues in aquaculture products in the past decade (from 2010 to 2020), including sample pre-treatment techniques such as hydrolysis, derivatization, extraction and purification, mass spectrometry techniques such as triple quadrupole mass spectrometry and high-resolution mass spectrometry as well as status of matrix certified reference materials (CRMs) and matrix effect.

Recent advances and applications of molecularly imprinted polymers in solid-phase extraction for real sample analysis

Sample pretreatment is essential for the analysis of complicated real samples due to their complex matrices and low analyte concentrations. Among all sample pretreatment methods, solid-phase extraction is arguably the most frequently used one. However, the majority of available solid-phase extraction adsorbents suffer from limited selectivity. Molecularly imprinted polymers are a type of tailor-made artificial antibodies and receptors with specific recognition sites for target molecules. Using molecularly imprinted polymers instead of conventional adsorbents can greatly improve the selectivity of solid-phase extraction, and therefore molecularly imprinted polymer-based solid-phase extraction has been widely applied to separation, clean up and/or preconcentration of target analytes in various kinds of real samples. In this article, after a brief introduction, the recent developments and applications of molecularly imprinted polymer-based solid-phase extraction for determination of different analytes in complicated real samples during the 2015-2020 are reviewed systematically, including the solid-phase extraction modes, molecularly imprinted adsorbent types and their preparations, and the practical applications of solid-phase extraction to various real samples (environmental, food, biological, and pharmaceutical samples). Finally, the challenges and opportunities of using molecularly imprinted polymer-based solid-phase extraction for real sample analysis are discussed.

Preparation of a ZIF-67-modified magnetic solid phase extraction material and its application in the detection of pyridine ring insecticides

An advanced and reliable m-SPE material of a water-stable ZIF was developed for the determination of trace praziquantel and pymetrozine in spinach and broccoli.

Direct extraction and detection of malachite green from marine sediments by magnetic nano-sized imprinted polymer coupled with spectrophotometric analysis

This research describes the application of magnetic molecularly imprinted nano-sized polymers (MMIPs) for the selective extraction and fast detection of malachite green (MG) from marine sediment samples followed by UV-Vis spectrophotometry. The novel material was prepared by surface imprinting using methacrylic acid as the functional monomer for fixing the template molecules. The polymers obtained at each step were thoroughly studied by transmission electron microscopy, FTIR spectroscopy and thermogravimetric analysis. Simultaneously, the adsorption performances of the resulting nanoparticles were analysed in detail and an excellent affinity with the MG was revealed. Further, the main parameters of magnetic molecular imprinted solid-phase extraction (MMIP-SPE) were screened via multivariate optimization methods. The magnetic nanoparticles were used as special adsorbents to directly extract MG from crude marine sediment extracts. The developed method exhibits satisfactory recoveries from the spiked samples, ranging from 80.40 to 92.96% with an RSD of less than 5.18% (n = 3).

Synthesis and Characterization of a Molecularly Imprinted Polymer of Spermidine and the Exploration of Its Molecular Recognition Properties

Spermidine is a functional ingredient that can extend the lifespan of many foods and indicate meat safety. However, its synthesis and enrichment is expensive and complex. To develop an effective separation material that can offer highly selective recognition of spermidine, we first applied non-covalent molecular imprinting technology using methacrylic acid as a functional monomer, azobisisobutyronitrile as an initiator, and ethylene glycol dimethacrylate as a cross-linker. The adsorption properties of the polymers were analyzed using the Scatchard equation, the Lagergren kinetic equation, and the static distribution coefficient. The optimal polymerization molar ratio of the template molecule spermidine to the functional monomer was 1:4, the maximum adsorption amount was 97.75 μmol/g, and the adsorption equilibrium time was 300 min. The selective experiment showed that the interfering substances tyramine and histamine had selectivity factor α values of 2.01 and 1.78, respectively, indicating that the prepared polymer had good spermidine recognition ability. The density function theory calculations showed that the hydrogen bond strength, steric effect, and product energy caused adsorption and separation differences among the different imprinted polymer complexes.

A Review on the Recent Progress in Matrix Solid Phase Dispersion

Matrix solid phase dispersion (MSPD) has proven to be an efficient sample preparation method for solid, semi-solid, and viscous samples. Applications of MSPD have covered biological, food, and environmental samples, including both organic and inorganic analytes. This review presents an update on the development of MSPD in the period 2015~June 2018. In the first part of this review, we focus on the latest development in MSPD sorbent, including molecularly imprinted polymers, and carbon-based nanomaterials etc. The second part presents the miniaturization of MSPD, discussing the progress in both micro-MSPD and mini-MSPD. The on-line/in-line techniques for improving the automation and sample throughput are also discussed. The final part summarizes the success in the modification of original MSPD procedures.

Advancements of molecularly imprinted polymers in the food safety field

Molecularly imprinted technology (MIT) has been widely employed to produce stable, robust and cheap molecularly imprinted polymer (MIP) materials that possess selective binding sites for recognition of target analytes in food, such as pesticides, veterinary drugs, mycotoxins, illegal drugs and so on. Because of high selectivity and specificity, MIPs have drawn great attention in the food safety field. In this review, the recent developments of MIPs in various applications for food safety, including sample preparation, chromatographic separation, sensing, immunoassay etc., have been summarized. We particularly discuss the advancements and limitations in these applications, as well as attempts carried out for their improvement.

Veterinary drugs residues: a review of the latest analytical research on sample preparation and LC-MS based methods

The world population is increasing and there is a growing demand for food, leading to intensification of farming methods and a requirement for more coadjuvants. Potential high profits sometimes lead to fraudulent use of drugs and pesticides. Veterinary drugs in particular can pose a real risk to human health if their residues are allowed to enter the food chain. Parent drugs and their metabolites can occur in foodstuffs individually or as multicomponent mixtures with enhanced adverse effects. In order to protect consumer safety, the European Union has established lists of forbidden substances, maximum residue limits for authorised drugs and precise criteria for confirmation analyses and interpretation of the results. Due to their nature and potential danger, the 'best available technique' should always be applied. Following this principle, this review examines the procedures and techniques applied to monitoring pharmaceutical products of major concern (e.g. anthelmintics, NSAIDs, corticosteroids, coccidiostats) in foods of animal origin, discussing advances over the past five years and future trends in the field of food safety. Our goal was both to focus attention on this important topic and to provide a selection of the most relevant recent papers on drug residues in foodstuffs.

Rapid and sensitive detection of trace malachite green and its metabolite in aquatic products using molecularly imprinted polymer-coated wooden-tip electrospray ionization mass spectrometry

In this study, a molecularly imprinted polymer-coated wooden-tip (MIPCWT) electrospray ionization mass spectrometry (ESI-MS) method was developed for rapid and sensitive detection of trace malachite green (MG) and its metabolite in aquatic products.