Dual-cloud point extraction coupled to high performance liquid chromatography for simultaneous determination of trace sulfonamide antimicrobials in urine and water samples

Preconcentration of sulphonamides in bovine milk by the cloud point extraction method using smartphone-based digital images

Sulphonamides are a group of synthetic antibiotics used specially in veterinary medicine. Among the procedures employed in the sample preparation for sulphonamide determination are liquid-liquid extraction (LLE) and solid-phase extraction (SPE) that use large volumes of organic solvents. Hence, a clean procedure was developed based on preconcentration and cloud point extraction (CPE) without using organic solvents to quantify total sulphonamides in bovine milk. The procedure was optimized as follows: 2 mL of pre-cleaned milk sample, 2 mL of reagent solution and 1 mL of Triton X-114 7% (m/v) were added to a tube, heated in a water bath at 40 °C for 10 minutes and centrifuged at 2950 rcf for 20 minutes. Digital image acquisition was employed directly at the tube without removing the supernatant/aqueous phase. The linear response was observed between 10 and 400 μg L^-1 of total sulphonamides and described by the following equation: S = 2.50 + 0.0514C (μg L^-1) and R = 0.999. The LOD and the CV (n = 11) were estimated to be 10 μg L^-1 and 1.3%, respectively. The main interferents present at their usual concentrations in the sample did not interfere with the results. Spike and recovery tests of total sulphonamides were carried out in UHT and pasteurized milk with recovery values between 73 and 106% and the results obtained for this kind of sample were in agreement with those achieved by a high performance liquid chromatography (HPLC) procedure at the 95% confidence level. The analytical procedure presents an adequate sensitivity to determine total sulphonamides in bovine milk and does not require organic solvents, being aligned to the principles of green chemistry.

Microcystins can be extracted from Microcystis aeruginosa using amino acid-derived biosurfactants

Microcystin, a cyanotoxin produced by Microcystis aeruginosa growing in eutrophic waters, can promote liver tumors in people ingesting contaminated water. To date, water treatment systems have not been effective in removing or degrading these cyanotoxins. In this work, we investigated the inhibitory activity of surfactants on the growth of M. aeruginosa and their application to extract the intracellular produced cyanotoxins. The experiments involving growth inhibition and extraction of cyanotoxins were carried out using the non-biodegradable surfactant cetyl trimethyl ammonium bromide (CTAB) in addition to other biodegradable surfactants. These were Tween 80 and surfactants derived from amino acids and peptides, respectively, from arginine, SDA, and hydrolyzed peptone, SDP. We demonstrated that the tested surfactants could be used to inhibit the growth of M. aeruginosa. At this point, CTAB and SDA proved to be the most competent surfactants in reducing cyanobacterial growth. Moreover, microcystins have been successfully removed from the water employing a cloud point extraction protocol based on the use of these surfactants and ammonium sulfate.

Development of a Screening Method for Sulfamethoxazole in Environmental Water by Digital Colorimetry Using a Mobile Device

Antibiotic resistance is a major health concern of the 21st century. The misuse of antibiotics over the years has led to their increasing presence in the environment, particularly in water resources, which can exacerbate the transmission of resistance genes and facilitate the emergence of resistant microorganisms. The objective of the present work is to develop a chemosensor for screening of sulfonamides in environmental waters, targeting sulfamethoxazole as the model analyte. The methodology was based on the retention of sulfamethoxazole in disks containing polystyrene divinylbenzene sulfonated sorbent particles and reaction with p-dimethylaminocinnamaldehyde, followed by colorimetric detection using a computer-vision algorithm. Several color spaces (RGB, HSV and CIELAB) were evaluated, with the coordinate a_star, from the CIELAB color space, providing the highest sensitivity. Moreover, in order to avoid possible errors due to variations in illumination, a color palette is included in the picture of the analytical disk, and a correction using the a_star value from one of the color patches is proposed. The methodology presented recoveries of 82–101% at 0.1 µg and 0.5 µg of sulfamethoxazole (25 mL), providing a detection limit of 0.08 µg and a quantification limit of 0.26 µg. As a proof of concept, application to in-field analysis was successfully implemented.

Hydrophobic magnetic nanoparticle assisted catanionic surfactant supramolecular solvent microextraction of multiresidue antibiotics in water samples

A novel extraction technique i.e. hydrophobic magnetic nanoparticle (MNP)-assisted in situ supramolecular solvent (SUPRAS) microextraction was proposed, and it was applied for the analysis of sulfonamides (SAs) and fluoroquinolones (FQs) in aqueous samples, coupled with high performance liquid chromatography-UV detection (HPLC-UV). In this extraction method, hexafluoroisopropanol-mediated salt-free catanionic surfactant based SUPRAS in situ microextraction was initially carried out; then, the SUPRAS was quickly adsorbed by the hydrophobic magnetic nanoparticles and gathered by an external magnetic field. This can greatly shorten the separation time and overcome the dependence on centrifugation, and also perform a secondary extraction of free analytes (not extracted by SUPRAS) from water samples. The magnetic separation ability of different hydrophobic MNPs was evaluated by adsorbing supramolecular aggregates from the water sample. The effective parameters affecting the extraction efficiency of the analytes were investigated and optimized using the one variable at a time method. About 3 min was required to realize the extraction of analytes with an enrichment factor (EF) of 12-53 for SAs and 79-118 for FQs. Compared with the centrifugation-assisted SUPRAS microextraction, the hydrophobic MNP-assisted SUPRAS microextraction obtained much better extraction and preconcentration efficiency. The proposed novel extraction method with HPLC-UV provided LODs of 0.21-0.76 ng mL-1 for SAs and 0.10-0.18 ng mL-1 for FQs. Good linearity was obtained with correlation coefficients ranging from 0.9962 to 0.9999. The intra- and inter-day recoveries of the target antibiotics were in the range of 92.0-111.3% with RSD% below 10.4%. The method was successfully applied to determine SAs and FQs in real water samples, such as lake water, river water, reservoir water, and wastewater.

Facile Cloud Point Extraction for the Separation and Determination of Phenolic Acids from Dandelion

It is significantly crucial to develop a robust pretreatment for the quantitative analysis of herbs. However, the traditional strategies are time-consuming, tedious, and not eco-friendly. In this work, cloud point extraction (CPE) is engineered for the simultaneous separation and enrichment of ferulic acid (FA), chlorogenic acid (CLA), and caffeic acid (CA) from dandelion prior to its determination by high-performance liquid chromatography (HPLC). A famous nonionic surfactant of Triton X-114 was selected as an extractant of CPE, and parameters affecting the extraction, such as surfactant concentration, salt content, pH value, temperature, and incubation time, were investigated carefully. Furthermore, the well-designed CPE with ultrasonic assistance combined with HPLC was developed for the detection of the target analytes in dandelion. The established method having a good linearity in the range of 0.15-26.2 mg L-1 with R 2 more than 0.9979 and the spiked recoveries ranging from 81 to 96% was applied to test real samples of dandelion. The contents of CA in samples were consistent with those assayed by the method (Chinese Pharmacopoeia 2015). The proposed method afforded good analytical performances, shorter pretreatment time (65 min), and less organic solvent consumption (less than 1.0 mL). It was proved that the developed method presented a facile, inexpensive, efficient, and environment-friendly pretreatment and can be used for the quantitative analysis of CLA, CA, and FA in dandelion. As expected, the proposed method would be a promising potential for the quality analysis of herbal medicines.

Multiresidue Determination of 27 Sulfonamides in Poultry Feathers and Its Application to a Sulfamethazine Pharmacokinetics Study on Laying Hen Feathers and Sulfonamide Residue Monitoring on Poultry Feathers

A method for the simultaneous determination of 27 sulfonamides in poultry feathers using ultra performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) was established in this study. The samples were extracted using 0.1 mol/L HCl solutions in a 60 °C water bath for 2 h, purified using hydrophilic-lipophilic balance solid-phase extraction, nitrogen-dried, and then reconstituted for UPLC-MS/MS analysis, which was performed with a CSH-C18 column. Linearity, limit of detection, limit of quantification, recovery, and precision were calculated in accordance with Commission Decision 2002/657/EC. For linearity, all standard curves showed a standard coefficient greater than 0.99, and the recoveries and coefficient of variation were 89-115% and <20%, respectively. The limit of detection and limit of quantification were 0.2-5 and 0.5-20 ng/g, respectively. The method was successfully applied to sulfamethazine (SMZ) residue accumulation monitoring in laying hen feathers and sulfonamide residue monitoring on poultry feathers. SMZ residue accumulation in the laying hen feathers was studied after administration with 100 mg/kg of SMZ for 21 consecutive days. SMZ residues were still detected in feathers 14 days after drug administration and persisted for up to 85 days. Results from 42 poultry feather samples showed that the feather is a suitable medium to monitor the illegal use of sulfonamides in poultry production.

Simultaneous determination of sulfonamides and fluoroquinolones from environmental water based on magnetic double-template molecularly imprinting technique

In this work, a fast and selective method based on magnetic extraction is presented for the simultaneous extraction of sulfonamides (SAs) and fluoroquinolones (FQs), followed by liquid chromatography-tandem mass spectrometry detection. In this method, magnetic surface double-template molecularly imprinted polymers (MSdt-MIPs) with superparamagnetic property and high selectivity toward both SAs and FQs were synthesized and directly applied to the simultaneous extraction of SAs and FQs from environmental water as magnetic adsorbents. The extraction and enrichment procedures could be accomplished in one single step by stirring the mixture of MSdt-MIPs and water sample, and the MSdt-MIPs with adsorbed analytes were easily separated from the water sample by a magnet afterwards. The adsorption mechanism of MSdt-MIPs was investigated by employing the adsorption thermodynamic and kinetic studies, and the selectivity of the MSdt-MIPs toward target analytes was evaluated through the selectivity test. For validation of the proposed method, the matrix effect was evaluated and compared to that of the traditional SPE method. Excellent linearity (R > 0.9990) for both SAs and FQs were obtained in the concentration range of 20-2000 ng L^-1, and the limits of detection are in the range of 3.0-4.7 ng L^-1 for SAs while 4.1-6.1 ng L^-1 for FQs. Finally, the proposed method was successfully applied to the simultaneous determination of SAs and FQs in several environmental water samples.

Ultrasonically Modified Amended-Cloud Point Extraction for Simultaneous Pre-Concentration of Neonicotinoid Insecticide Residues

An effective pre-concentration method, namely amended-cloud point extraction (CPE), has been developed for the extraction and pre-concentration of neonicotinoid insecticide residues. The studied analytes including clothianidin, imidacloprid, acetamiprid, thiamethoxam and thiacloprid were chosen as a model compound. The amended-CPE procedure included two cloud point processes. Triton™ X-114 was used to extract neonicotinoid residues into the surfactant-rich phase and then the analytes were transferred into an alkaline solution with the help of ultrasound energy. The extracts were then analyzed by high-performance liquid chromatography (HPLC) coupled with a monolithic column. Several factors influencing the extraction efficiency were studied such as kind and concentration of surfactant, type and content of salts, kind and concentration of back extraction agent, and incubation temperature and time. Enrichment factors (EFs) were found in the range of 20⁻333 folds. The limits of detection of the studied neonicotinoids were in the range of 0.0003⁻0.002 µg mL−1 which are below the maximum residue limits (MRLs) established by the European Union (EU). Good repeatability was obtained with relative standard deviations lower than 1.92% and 4.54% for retention time (tR) and peak area, respectively. The developed extraction method was successfully applied for the analysis of water samples. No detectable residues of neonicotinoids in the studied samples were found.