Simultaneous quantitation of hydrazine and acetylhydrazine in human plasma by high performance liquid chromatography-tandem mass spectrometry after derivatization with p -tolualdehyde

LC/MS- and GC/MS-based metabolomic profiling to determine changes in flavor quality and bioactive components of Phlebopus portentosus under low-temperature storage

Introduction

Low temperature is the most common method used to maintain the freshness of Phlebopus portentosus during long-distance transportation. However, there is no information regarding the nutritional changes that occur in P. portentosus preserved postharvest in low temperature.

Methods

In this study, the changes in flavor quality and bioactive components in fruiting bodies stored at 4 °C for different storage periods were determined through LC/MS and GC/MS analyses. Sampling was performed at 0, 3, 5, 7, and 13 days storage.

Results and Discussion

Based on the results, the metabolites present in caps and stipes were different at the same period and significantly different after 7 days of storage. A total of 583 and 500 different metabolites were detected in caps and stipes, respectively, and were mainly lipids and lipid-like molecules, organic acids and derivatives, organic oxygen compounds and others. Except for prenol lipids and nucleotides, the expression levels of most metabolites increased with longer storage time. In addition, geosmin was identified as the major contributor to earthy-musty odors, and the level of geosmin was increased when the storage time was short.

Conclusion

The variations in these metabolites might cause changes in flavor quality and bioactive components in P. portentosus. Variations in these metabolites were thoroughly analyzed, and the results revealed how storage processes affect the postharvest quality of P. portentosus for the first time.

Determination of hydrazine in air by liquid chromatography/tandem mass spectrometry combined with precolumn derivatization

In this study, we developed a determination method for hydrazine in the air. Hydrazine was derivatized with p-dimethyl amino benzaldehyde (DBA) to yield p-dimethylaminobenzalazine, which was subjected to liquid chromatography-electrospray tandem mass spectrometry (LC/MS/MS) analysis. The derivative exhibited good sensitivity in the LC/MS/MS analysis, and its instrument detection limit and instrument quantification limit were 0.003 and 0.008 ng/mL, respectively. The air sample was collected using an air sampler equipped with a peristaltic pump at 0.2 L/min for 8 h. We demonstrated that a silica cartridge impregnated with DBA and 1,2-bis(4-pyridyl) ethylene can collect hydrazine in the air stably. The mean recovery rates in outdoor and indoor locations were 97.6% and 92.4%, respectively. Further, the method detection and quantification limits were 0.1 and 0.4 ng/m³, respectively. The proposed method does not require any pretreatment and/or concentration step, enabling high-throughput analyses.

Electrochemical Sensors Based on a Composite of Electrochemically Reduced Graphene Oxide and PEDOT:PSS for Hydrazine Detection

In this study, hydrazine sensors were developed from a composite of electrochemically reduced graphene oxide (ErGO) and poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS), deposited onto a glassy carbon electrode (GCE). The structural properties, electrochemical characterization, and surface morphologies of this hydrazine sensor were characterized by Raman spectroscopy, Fourier transform infrared (FTIR) spectroscopy, electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM). In addition, the proposed hydrazine sensor also demonstrates good electrochemical and analytical performance when investigated using cyclic voltammetry (CV), differential pulse voltammetry (DPV), and amperometry techniques under optimal parameters. Using these investigated parameters, DPV and amperometry were chosen as techniques for hydrazine measurements and showed a linear range of concentration in the range of 0.2-100 μM. The obtained limits of detection and limits of quantitation for hydrazine measurements were 0.01 and 0.03 μM, respectively. In addition, the proposed sensor demonstrated good reproducibility and stability in hydrazine measurements in eight consecutive days. This fabricated hydrazine sensor also exhibited good selectivity against interference from Mg²⁺, K⁺, Zn²⁺, Fe²⁺, Na⁺, NO₂ ^-, CH₃COO^-, SO₄ ^2-, Cl^-, ascorbic acid, chlorophenol, and triclosan and combined interferences, as well as it depicted %RSD values of less than 5%. In conclusion, this proposed sensor based on GCE modified with ErGO/PEDOT:PSS displays exceptional electrochemical performance for use in hydrazine measurements and have the potential to be employed in practical applications.

Orthogonal Chemical Reporter Strategy Enables Sensitive and Specific SERS Detection of Hydrazine Derivatives

Hydrazine and its derivatives are well-known environmental hazards and biological carcinogens; therefore, there is a great need for a powerful workflow solution for protecting the public from unexpected exposure to toxic contaminants. Recently, functional surface-enhanced Raman scattering (SERS) exhibits enormous benefits in sensing trace biochemical substances due to its fingerprint-like identification of individual molecules, making it an ideal method for detecting and quantifying hydrazine. Herein, for the first time, we integrated the orthogonal chemical reporter strategy with SERS to build an intelligent hydrazine detection platform (orthogonal chemical SERS, ocSERS), in which 4-mercaptobenzaldehyde was incorporated on a nanoimprinted gold nanopillar array, which acted as an orthogonal coupling partner of hydrazine to form Raman active benzaldehyde hydrazone, allowing for sensitively detecting hydrazine with a detection limit of 10^-13 M in complex circumstances. Particularly, ocSERS could effectively identify the carcinogen N-nitrosodimethylamine (NDMA) after its reduction to dimethylhydrazine (UDMH), enabling ultrasensitive detection of UDMH (10^-13 M). Importantly, ocSERS could not only monitor elevated levels of NDMA in ranitidine due to improper storage but also quantify NDMA in urine and blood after oral administration of NDMA-containing drugs, thereby preventing NDMA overexposure. Therefore, ocSERS represents the first click SERS sensor and may open up a new analytical field.

Quantitative Analysis of Isoniazid and Its Four Primary Metabolites in Plasma of Tuberculosis Patients Using LC-MS/MS

Isoniazid and its metabolites are potentially associated with hepatotoxicity and treatment outcomes in patients who receive antituberculosis (TB) therapy. To further understand the pharmacokinetic profiles of these molecules, a method based on LC-MS/MS was developed to determine the concentration of these compounds in human plasma. Isoniazid, acetylisoniazid, and isonicotinic acid were directly analyzed, whereas hydrazine and acetylhydrazine were determined after derivatization using p-tolualdehyde. Chromatographic separation was conducted on reversed-phase C18 columns with gradient elution, and detection was carried out in multiple reaction monitoring mode. The calibration curves were linear with correlation coefficients (r) greater than 0.9947 for all analytes. The intra- and inter-day precision was less than 13.43%, and the accuracy ranged between 91.63 and 114.00%. The recovery and matrix effect of the analytes were also consistent (coefficient of variation was less than 9.36%). The developed method successfully quantified isoniazid and its metabolites in TB patients. The method has broad applications in clinical research, including isoniazid one-point-based therapeutic drug monitoring, genotype-phenotype association studies of isoniazid metabolic profile and isoniazid-induced hepatotoxicity, and the initial dose prediction of isoniazid using population pharmacokinetic modeling.

Electrocatalytically active cuprous oxide nanocubes anchored onto macroporous carbon composite for hydrazine detection

Cuprous oxide (Cu₂O) is a p-type semiconductor with excellent catalytic activity and stability that has gained much attention because it is non-toxic, abundant, and inexpensive. Porous carbon materials have large specific surface areas, which offer abundant electroactive sites, enhance the electrical conductivity of materials, and prevent the aggregation of Cu₂O nanocubes. In this study, a composite with high electrocatalytic activity was prepared based on Cu₂O nanocubes anchored onto three-dimensional macroporous carbon (MPC) by a simple, eco-friendly, and cheap method for hydrazine detection. Due to the synergistic effect of MPC and Cu₂O, the sensor exhibited high electrocatalytic activity, sensitivity, better selectivity, and low limit of detection. The resulting sensor could be a sensitive and effective platform for detecting hydrazine and promising practical applications.

Exploration of inhibition potential of isoniazid and its metabolites towards CYP2E1 in human liver microsomes through LC-MS/MS analysis

Isoniazid (INH) is the first-line anti-tubercular drug that is used both for the prophylaxis as well as the treatment of tuberculosis (TB). The patients with TB are more vulnerable to secondary infections and other health complications, hence, they are usually administered a cocktail of drugs. This increases the likelihood of drug-drug interactions (DDIs). INH is clinically proven to interact with drugs like phenytoin, carbamazepine, diazepam, triazolam, acetaminophen, etc. Most of such clinical observations have been supported by in vitro inhibition studies involving INH and cytochrome P450 (CYP) enzymes. A few published in vitro studies have explored the CYP2E1 inhibition potential of INH to explain its interactions with acetaminophen and other CY2E1 substrates, such as chlorzoxazone, but none of them were able to demonstrate any significant inhibition of the enzyme by the drug. It was reported that metabolites of INH, such as acetylhydrazine and hydrazine, were bioactivated by CYP2E1, highlighting that perhaps the drug metabolites were responsible for the mechanism based inhibition (MBI) of the enzyme. Therefore, the purpose of this investigation was to explore CYP2E1 enzyme inhibition potential of INH and its four major metabolites, viz., acetylisoniazid, isonicotinic acid, acetylhydrazine and hydrazine, using human liver microsomes (HLM). Additionally, we determined the fraction unbound in microsomal incubation (fu_mic) for all the five compounds using equilibrium dialysis assay. We observed that INH and its metabolites had lower propensity for microsomal binding, and the metabolites also lacked the potential to inhibit CYP2E1 enzyme, either by direct inhibition or through MBI. This suggests involvement of some other mechanism to explain interactions of INH with CY2E1 substrates, signifying need of further exploration.

In situ generated chromophore as the indicator for background-free sensing strategy of hydrazine with high sensitivity with in vitro and in vivo applications

A background-free sensing assay for hydrazine was developed by using a fluorescent chromophore generated in situ as the signal indicator.