Determination of pioglitazone, its metabolite and alogliptin in human plasma by a novel LC-MS/MS method; application to a pharmacokinetic study

Thiazolidinediones: Recent Development in Analytical Methodologies

The instrumental analytical methods that have been developed and utilized for the determination of thiazolidinedione in bulk medications, formulations and biological fluids have been reviewed after an in-depth analysis of the literature published in a variety of analytical and pharmaceutical chemistry-related journals. The approaches covered by this research, which covers the years 2001-2022, include complex methods for analysis, chromatographic techniques and spectrometric analytical procedures. The mobile phase, flow rate, sample matrix, wavelength and other factors identified in the literature were just a few of the parameters used to evaluate thiazolidinediones. The present review focuses on the published analytical techniques for thiazolidinedione analysis that have been previously identified in the literature. The specified outcomes followed extensive learning, and the most recent advances in analytical methods for the identification of pioglitazone, pioglitazone HCl, rosiglitazone, rosiglitazone maleate and lobeglitazone were reviewed. Additionally, this article briefly discusses features of analytical discovery on thiazolidinediones, which will enable readers to access all discoveries in one place with precise outcomes.

An Effective Chromatographic Method for Simultaneous Quantification of Antidiabetic Drugs Alogliptin Benzoate and Pioglitazone HCl in Their Tablet Dosage Form: Implementation to In vitro Dissolution Studies and Uniformity of Dosage Unit

In patients with Type 2 diabetes, a combination of Alogliptin and Pioglitazone medications, together with diet and physical activity, are used to improve glycemic control. Eco-friendly, cost-effective, and precise stability-indicating RP-HPLC method was developed and validated for the identification and quantification of Alogliptin and Pioglitazone in their tablet dosage form, as well as implementation to in vitro dissolution studies and uniformity of dosage unit. Isocratic separation is conducted at ambient temperature on the InertSustain C18 Analytical Column (150 × 4.6 mm, 5 μm) using mobile phase comprising 50 mM of ammonium dihydrogen phosphate and 5.0 mM of heptane sulfonic acid:acetonitrile (45:55, v/v) at a flow rate of 1.3 mL/minute. Calibration curves are conducted in the linearity range of 1-40 μg/mL of Alogliptin and 2.5-75 μg/mL of Pioglitazone with a correlation value >0.9995 and satisfactory recovery findings between 99 and 100%. The degraded samples are analyzed under relevant stress conditions as acidity, alkalinity, thermal and oxidation. The active components in finished products were subjected to a content uniformity test, which showed that they achieved the declared claim's acceptance standards (85-115%). Comparative in vitro dissolution studies are performed for generic products Inhibazone 12.5/30 mg FCT and Inhibazone 25/15 mg FCT against innovator products Oseni 12.5/30 mg FCT and Oseni 25/15 mg FCT at suitable FDA dissolution medium and different USP dissolution media and the results are similar. The metrics of the designed method were assessed according to ICH requirements, and all metrics, such as system suitability, linearity, recovery, robustness, LOD, LOQ, specificity and precision, were found to be within required tolerances and no overlapping was found for degradation peaks. Thence, the method can be used in quality control for the analysis of raw material, bulk, finish and stability.

Earth-friendly micellar UPLC technique for determination of four hypoglycemic drugs in different pharmaceutical dosage forms and spiked human plasma

A novel, sensitive, and green micellar UPLC method was proposed and validated for the simultaneous determination of four hypoglycemic agents used in type II diabetes mellitus treatment namely, pioglitazone, alogliptin, glimepiride, and vildagliptin. The developed UPLC method was successfully applied for quantitative analysis of these drugs in bulk, in pharmaceutical formulations, and in spiked human plasma. Chromatographic separation was carried out on a Kinetex® 1.7 μm XB-C18 100 Å (50 × 2.1 mm) column, using a degassed and filtered mixture of (0.1 M SDS- 0.3% triethyl amine- 0.1% phosphoric acid (pH 6)) and n-propanol (85:15 v/v), at a flow rate of 0.2 mL/min. The experimental conditions of the suggested method were well investigated and optimized. The newly developed micellar UPLC method is capable of determining different dosage forms at the same time with the same solvents, saving time and effort. The method was found to be efficiently applicable in spiked human plasma and could be extended to study the pharmacokinetics of the cited drugs in real human plasma samples. The greenness of the developed method was evaluated by applying the Eco-scale scoring tool, which verified the excellent greenness of the analytical method.

Determination of pioglitazone hydrochloride by flow injection chemiluminescence tris(2,2'-bipyridyl)ruthenium(II)-silver(III) complex system

A novel flow injection-chemiluminescence (FI-CL) approach is proposed for the assay of pioglitazone hydrochloride (PG-HCl) based on its enhancing influence on the tris(2,2'-bipyridyl)ruthenium(II)-silver(III) complex (Ru(bipy)₃ ²⁺ -DPA) CL system in sulfuric acid medium. The possible CL reaction mechanism is discussed with CL and ultraviolet (UV) spectra. The optimum experimental conditions were found as: Ru(bipy)₃ ²⁺ , 5.0 × 10^-5  M; sulfuric acid, 1.0 × 10^-3  M; diperiodatoargentate(III) (DPA), 1.0 × 10^-4  M; potassium hydroxide, 1.0 × 10^-3  M; flow rate 4.0 ml min^-1 for each flow stream and sample loop volume, 180 μl. The CL intensity of PG-HCl was linear in the range of 1.0 × 10^-3 to 5.0 mg L^-1 (R²  = 0.9998, n = 10) with limit of detection [LOD, signal-to-noise ratio (S/N) = 3] of 2.2 × 10^-4  mg L^-1 , limit of quantification (LOQ, S/N = 10) of 6.7 × 10^-4  mg L^-1 , relative standard deviation (RSD) of 1.0 to 3.3% and sampling rate of 106 h^-1 . The methodology was satisfactorily used to quantify PG-HCl in pharmaceutical tablets with recoveries ranging from 93.17 to 102.77 and RSD from 1.9 to 2.8%.

Development of Capillary Zone Electrophoresis Method for the Simultaneous Separation and Quantification of Metformin and Pioglitazone in Dosage Forms; and Comparison with HPLC Method

A capillary zone electrophoretic (CZE) method was developed, validated, and applied for the assay of metformin (MET) and pioglitazone (PIO) in pharmaceutical formulations. The optimum running buffer composition was found to be 75 mmol/L phosphate buffer containing 30% acetonitrile (ACN) at pH 4.0. The optimum instrumental conditions were found to be injection time, 10 s; applied voltage, 25 kV; hydrodynamic injection pressure, 0.5 psi for 10 s, capillary temperature, 25 °C; and the detection wavelength, 210 nm. The quantifications were calculated based on the ratio of the peak areas of analytes to atenolol as an internal standard. The CZE method was validated in terms of accuracy (98.21-104.81%), intra- and inter-day precision of migration time and peak area (relative standard deviation ≤ 5%), linearity (correlation coefficients ≥ 0.9985), limit of detection (≤0.277 μg/mL), and limit of quantitation (≤0.315 μg/mL). The proposed method was applied for the analysis of PIO and MET both individually and in a combined dosage tablet formulation. All electrophoretic parameters were calculated and evaluated. A previously reported high-performance liquid chromatographic (HPLC) method was also applied to the same samples. A comprehensive comparison was then carried out for the analytical features of both methods CZE and HPLC. Comparable results were obtained with the advantage of reagent consumption and separation efficiency of CZE over HPLC and shorter analysis time by HPLC compared with CZE.

Using of eosin Y as a facile fluorescence probe in alogliptin estimation: Application to tablet dosage forms and content uniformity testing

New simple sensitive and reliable spectrofluorimetric approach was established for the determination of the antidiabetic drug; Alogliptin (ALG) in its pure and tablet forms. The developed approach is depended on the suppressive action of ALG on the eosin Y native fluorescence. The quenching action of ALG on the eosin Y native fluorescence was measured at acidic medium pH: 3.5, emission wavelength 541 nm (λ_ex. 260 nm). The relative fluorescence intensity (RFI) was measured, and it was directly proportional to ALG concentration in the concentration range of (15-110) μg/mL. The developed and optimized approach was entirely validated regarding to ICH guidelines. The developed method application was successfully extended for ALG content uniformity test (CU). The distribution fraction (DF), rate constants (K), and free energy changes (ΔG°) were calculated. The results obtained were compared to that of the published spectrophotometric one.

Validity of the association between five steroid hormones quantification and female infertility conditions: A new perspective for clinical diagnosis

Quantification of endogenous steroids and their precursors is essential for diagnosis of a wide range of causes for female infertility. However, immunoassays often overestimate concentrations due to assay interference by other endogenous steroids, especially at low concentrations. In addition, it still lacks of diagnostic reference intervals for five sex steroid hormones, including estradiol (E₂), 11-deoxycorticosterone (DOC), 17-hydroxyprogesterone (17-OHP₄), pregnenolone (P₅) and progesterone (P₄), which are crucial for distinguishing between normal individuals and female infertility. Therefore, we developed and validated a reliable and rapid ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) method for simultaneous determination and quantification of five sex hormones, giving the reference intervals to accurately evaluate and diagnose female infertility. Our results showed that the developed UPLC-MS/MS assay was fast, high throughput, reproducible, specific, accurate, highly sensitive, and fully validated for simultaneous determination of P₅, P₄, 17-OHP₄, DOC and E₂ in human follicular fluid. The simple sample preparation procedure in the current study gave reproducible and consistent recoveries. The validation results show that the UPLC-MS/MS assay has acceptable accuracy and precision at low concentrations, which permits their use in clinical study. In addition, our data gave the concentration range of five steroid hormones quantification in patients with female infertility and normal individuals. Our data can be used to accurately evaluate and diagnose female infertility.

Hantzsch Condensation Reaction as a Spectrofluorometric Method for Determination of Alogliptin, an Anti-diabetic Drug, in Pure, Tablet, Human, and rat plasma

To analyze alogliptin in its pharmaceutical dosage forms and human plasma, a sensitive, inexpensive, simple, and precise spectrofluorimetric method was developed and tested. Also, this method was used to investigate the drug pharmacokinetic behavior in the blood of rats. It is based on the Hantzsch reaction, which produces yellowish luminous products that can be detected spectrofluorometrically at 480 and 415 nm, emission, and excitation, respectively, when the primary amine group in the examined drug reacts with acetylacetone and formaldehyde. Several experimental parameters that affect the reaction product's development and stability were explored and improved. The curve of fluorescence and concentration for alogliptin was linear in the concentration range of 0.05-3.60 μg ml^-1 . According to ICH criteria, the proposed approach was validated. The method was successfully utilized to evaluate the examined drug in dose formulations and spiked human plasma with high accuracy.

Analysis of Metformin and Five Gliptins in Counterfeit Herbal Products: Designs of Experiment Screening and Optimization

BACKGROUND

Drug counterfeiting is a rising problem due to difficulties with identifying counterfeit drugs and the lack of regulations and legislation in developing countries.

OBJECTIVE

This study aims to develop a robust and economic reversed phase high performance liquid chromatography (LC) method for simultaneously determining metformin HCl, vildagliptin, saxagliptin, alogliptin benzoate, sitagliptin phosphate monohydrate, and linagliptin to target counterfeiting.

METHODS

Plackett-Burman (PB) and Box-Behnken (BB) designs were used to screen and optimize the mobile phase composition. Chromatographic separation was carried out on an Inertsil® ODS-3 C18 column with isocratic elution mode and the mobile phase was a mixture of acetonitrile-methanol-ammonium formate buffer, pH 3.5 (25:10:65, v/v/v). This method was applied to analyze synthetic drugs in three traditional Chinese and Indian herbal medicines. To identify the adulterants, thin-layer chromatography (TLC), nuclear magnetic resonance (NMR), and mass spectrometry (MS) were used on counterfeit herbal medicines.

RESULTS

The developed method is sensitive, simple, rapid, economical, accurate, and highly robust. Student's t-test and variance ratio (F-test at P < 0.05) were used to compare the results statistically with the reference methods.

CONCLUSION

The study found that the analyzed herbal medicines were adulterated with metformin and the quantification of anti-diabetic counterfeits was therefore applied.

HIGHLIGHTS

This study determined counterfeited anti-diabetic drugs in Indian and Chinese traditional herbal medicines(THMs). Design-of-experiment, PB, and BB designs were used. Method validation was also performed in accordance with the International Conference on Harmonization guidelines.

Graft hyper-branched dendrimer onto WS2 nanosheets modified Poly (N-Vinylcaprolactam) as a thermosensitive nanocarrier for Pioglitazone delivery using near-infrared radiation

In this paper, graft-copolymerization of N-vinylcaprolactam and allylamine onto tungsten disulfide (WS₂) in the presence of AIBN as initiator has been carried out to prepare the WS₂@ (NVCL-co-AAm). Subsequent fifth-generation dendrimer was attached to their surface, and used as a nanocarrier for the pioglitazone (PG) drug delivery. The resulting polymer was characterized by FTIR, XRD, TEM, EDX, and TGA. We loaded PG onto polymer and evaluated the drug loading and release patterns in simulated human blood fluid (pH 7.4) for the treatment of diabetes in vitro. The thermosensitive nanocarrier indicated a maximum of 98 % PG release in the simulated human blood fluid at 50 °C within 6 h, and about 18 % of total PG was released from the nanocarrier within 6 h at 37 °C. Herein, we studied near-infrared (NIR) radiation as an irritant for inducing PG release from nanocarrier. Also, PG releasing was 100 % under NIR laser irradiation within 15 min, which was roughly four times of that without laser irradiation. NIR laser light heated the nanocarrier, causing shrinkage of the polymer, which increased the penetrability of the membrane and resulted in PG release. Following four adsorption isotherm models, the Langmuir model excellently explained the adsorption isotherm.

Development and validation of a sensitive LC-MS/MS method for pioglitazone: application towards pharmacokinetic and tissue distribution study in rats

In the present study, a sensitive LC-MS/MS method was developed and validated to measure pioglitazone (PGZ) concentrations in rat plasma and tissues. The chromatographic separation was achieved by using a YMC Pro C₁₈ column (100 mm × 4.6 mm, 3μ) with a mobile phase consisting of formic acid (0.1% v/v) and acetonitrile (5 : 95) at a flow rate of 0.7 mL min⁻¹ and injection volume of 10 μL (IS: rosiglitazone). Mass spectrometric detection was done using triple quadrupole mass spectrometry using the ESI interface operating in a positive ionization mode. The developed method was validated over a linearity range of 1–500 ng mL⁻¹ with detection and a lower quantification limit of 0.5 ng mL⁻¹ and 1 ng mL⁻¹. The method accuracy ranged from 95.89–98.78% (inter-day) & 93.39–97.68% (intra-day) with a precision range of 6.09–8.12% for inter-day & 7.55–9.87% for intra-day, respectively. The PGZ shows the highest C_max of 495.03 ng mL⁻¹ in plasma and the lowest C_max, 24.50 ± 2.71 ng mL⁻¹ in bone. The maximum T_max of 5.00 ± 0.49 h was observed in bone and a minimum of 1.01 ± 0.05 h in plasma. The AUC_{(0–24 h and 0–∞)} values are highest in plasma (1056.58 ± 65.78 & 1069.38 ± 77.50 ng h⁻¹ mL⁻¹) and lowest in brain (166.93 ± 15.70 &167.12 ± 16.77 ng h⁻¹ mL⁻¹), and the T_1/2 was highest in plasma (5.62 ± 0.74 h) and lowest in kidney (2.78 ± 0.19). The developed method was successfully used to measure the PGZ pharmacokinetic and tissue distribution. Further, the developed method could be utilized for validating target organ (adipose tissue) specific delivery of PGZ (nano-formulations) in addition to conventional dosage forms.

The developed method was investigated for target and off-target distribution of pioglitazone and could be applied to validate the site-specific delivery systems.

Spectrofluorometric determination of alogliptin an antidiabetic drug in pure and tablet form using fluorescamine, a fluorogenic agent: application to content uniformity test

Alogliptin is an antidiabetic drug that belongs to a group called dipeptidyl peptidase-4 enzyme inhibitors. As the drug contains a primary amino group in its structure, it readily reacts with fluorescamine in slightly alkaline medium (borate buffer, pH 8.8) to form a highly fluorescent product. Emission of this product was measured at 477 nm (λ_ex = 387 nm). The linear range between the fluorescence intensity and the drug concentration was 0.1-0.5 μg ml^-1 with a good correlation coefficient (0.9986). Limits of detection and quantitation were 22 and 72 ng ml^-1 , respectively. Guidelines of the International Conference for Harmonisation were followed to validate the developed method with acceptable results. Alogliptin content was determined successfully in its commercial dosage form using the fluorescamine method with good recovery (98.60-101.26%). The method has excellent levels of accuracy and precision compared with the reported method as assessed using Student's t-test and Fisher's exact test. The method was applied successfully for the content uniformity test with high recovery and low relative standard deviation.